View previous topic :: View next topic |
Author |
Message |
Monkfish
Joined: 28 May 2007 Posts: 57
|
Posted: Thu Jan 25, 2018 4:29 pm Post subject: URC-7562 B00 & B01 remotes (was RM-IR V2.02) |
|
|
I have a complete setup file for two URC-7562-B01 remotes. I bought a third unit but it turned out to be the URC-7562-B00 model. This doesn't seem to be listed in the RM-IR remote list. I have successfully installed the required upgrades into the B00 unit using a downloaded audio file. Is there a way to easily modify my existing RM-IR setup file for the B01 unit to work on the B00 unit? Any assistance or suggestions would be greatly appreciated. Thanks.
PS// Both units look identical and I believe use the same chip. |
|
Back to top |
|
|
mathdon Expert
Joined: 22 Jul 2008 Posts: 4523 Location: Cambridge, UK |
Posted: Fri Jan 26, 2018 1:24 pm Post subject: |
|
|
There is an RDF for a URC-7562 as well as for a URC-7562 B01, and I would expect that to be the B00 version. Have you tried downloading the B00 model with RMIR? If I am right then it should pick up the URC-7562 RDF automatically. If I am wrong then you should still get a message that says "No RDF found for signature starting ..." and the value it gives should help us further. _________________ Graham |
|
Back to top |
|
|
Monkfish
Joined: 28 May 2007 Posts: 57
|
Posted: Mon Jan 29, 2018 3:37 pm Post subject: |
|
|
Thanks Mathdon, I'll give it a go and report back |
|
Back to top |
|
|
|