View previous topic :: View next topic |
Author |
Message |
gaines
Joined: 01 Jul 2006 Posts: 12 Location: Nashville, TN |
Posted: Mon Nov 17, 2008 6:39 pm Post subject: BenQ MP610 |
|
|
1. Device: BenQ MP610 (same remote as MP620P, CP120C and CP220)
2. Type of device: Projector
3. Year:
4. JP1/UEI Remote model: URC-9910
5. Do you have a JP1 cable? Yes
6. Still have original remote? No
7. Checked the file section? Yes
8. Checked Pronto file section (at R/C)? Yes
9. Partially working setup code? No
10. Learning remote question? N/A
I traded a guy some fish supplies for this projector. It works great, but did not come with a remote. Any help would be greatly appreciated as I have it mounted on the ceiling and standing on the couch to turn it on is getting really old. |
|
Back to top |
|
|
greenough1
Joined: 30 Jan 2005 Posts: 659
|
Posted: Mon Nov 17, 2008 7:39 pm Post subject: |
|
|
I checked the Benq 8700 projector KM file and see that it uses setup 2020 for a URC-9910, using NEC1, 141. The Benq 8220 uses setup code 1500, NEC1, 48, FWIW. The setup codes are most likely not in the remotes.
Did you try either of these upgrades to see if either worked partially, since you have a cable? If they partially work, then you're pretty much in business.
I found these replacement remotes HERE . On that page there's a link to a cheaper compatible remote. So buying a remote could be a fall back, should your craigslist posting not give any help.
I note also that OFA doesn't list setup codes for benq, but there's no projector category.
Sorry for not much help.
jeff |
|
Back to top |
|
|
The Robman Site Owner
Joined: 01 Aug 2003 Posts: 21251 Location: Chicago, IL |
Posted: Mon Nov 17, 2008 7:43 pm Post subject: |
|
|
I believe projectors get lumped in with TVs in OFA lists. _________________ Rob
www.hifi-remote.com
Please don't PM me with remote questions, post them in the forums so all the experts can help! |
|
Back to top |
|
|
gaines
Joined: 01 Jul 2006 Posts: 12 Location: Nashville, TN |
Posted: Mon Nov 17, 2008 7:45 pm Post subject: |
|
|
Thanks for the quick reply. I tried all four BenQ KM files from the downloads section and none of them worked (only tried power).
I called BenQ and the guy was really nice. He said Japan has never released the remote codes, however he said he has the ASCII codes and can send them to me. He started saying something about using hyperterminal to connect over a serial port...so I'm thinking he's talking about bypassing the need for a remote altogether and sending commands to the projector through serial. Any idea if those could be of help with this?
I may just break down and buy a $30 replacement remote. I just hated to buy one then find out I could have just gotten the code from somewhere since I wont be using it once I get my universal programmed.
Thanks,
Gaines |
|
Back to top |
|
|
greenough1
Joined: 30 Jan 2005 Posts: 659
|
Posted: Mon Nov 17, 2008 8:03 pm Post subject: |
|
|
In the OFA kameleon manual (59300), there's a benq setup code 1032, gotten HERE .
Anyone know what this setup code is and might it help?
jeff |
|
Back to top |
|
|
The Robman Site Owner
Joined: 01 Aug 2003 Posts: 21251 Location: Chicago, IL |
Posted: Mon Nov 17, 2008 11:36 pm Post subject: |
|
|
greenough1 wrote: | In the OFA kameleon manual (59300), there's a benq setup code 1032, gotten HERE .
Anyone know what this setup code is and might it help?
jeff |
TV/1032 = NEC1, device code 96. POWER is EFC 187.
VCR/0042, which is in the URC-9910, also uses NEC1, dev 96, so you could test EFC 187 using that setup code to see if it powers up your projector. _________________ Rob
www.hifi-remote.com
Please don't PM me with remote questions, post them in the forums so all the experts can help! |
|
Back to top |
|
|
gaines
Joined: 01 Jul 2006 Posts: 12 Location: Nashville, TN |
Posted: Tue Nov 18, 2008 12:41 am Post subject: |
|
|
The Robman wrote: | greenough1 wrote: | In the OFA kameleon manual (59300), there's a benq setup code 1032, gotten HERE .
Anyone know what this setup code is and might it help?
jeff |
TV/1032 = NEC1, device code 96. POWER is EFC 187.
VCR/0042, which is in the URC-9910, also uses NEC1, dev 96, so you could test EFC 187 using that setup code to see if it powers up your projector. |
If I understand what you said correctly, by setting the VCR on my remote to 0042 I can test EFC 187 to see if it correctly powers on my projector. It does not. |
|
Back to top |
|
|
MaskedMan Tivo Expert
Joined: 10 Feb 2004 Posts: 1011 Location: Boone, IA |
Posted: Tue Nov 18, 2008 2:11 am Post subject: |
|
|
In the latest UEI made Directv remote, the RC64, there are 3 BenQ codes listed, they're 11032, 11212, and 11315. _________________ Edmund |
|
Back to top |
|
|
mdavej Expert
Joined: 08 Oct 2003 Posts: 4502
|
Posted: Tue Nov 18, 2008 9:59 am Post subject: |
|
|
If you want to give Rat Shack a try, the 15-100 has a BenQ code 11756. The 15-133, 134 and 135 also have that code listed under Daewoo TV's. The Altas OCAP has BenQ codes 1032 and 1315, as well as code 1756 under Gateway, Tatung and Vizio TV's. |
|
Back to top |
|
|
The Robman Site Owner
Joined: 01 Aug 2003 Posts: 21251 Location: Chicago, IL |
Posted: Tue Nov 18, 2008 10:23 am Post subject: |
|
|
TV/1756 is the same as TV/1032, so that's not the one. I don't have info on TV/1212 or TV/1315. _________________ Rob
www.hifi-remote.com
Please don't PM me with remote questions, post them in the forums so all the experts can help! |
|
Back to top |
|
|
mdavej Expert
Joined: 08 Oct 2003 Posts: 4502
|
Posted: Tue Nov 18, 2008 12:33 pm Post subject: |
|
|
TV/1315 is also NEC1 device code 96, but power is EFC 181, if the OP wants to try that EFC with VCR/0042. |
|
Back to top |
|
|
eferz Expert
Joined: 03 Jun 2010 Posts: 1078 Location: Austin, Texas |
Posted: Thu Feb 02, 2012 3:05 pm Post subject: Re: BenQ MP610 |
|
|
gaines wrote: | 1. Device: BenQ MP610
4. JP1/UEI Remote model: URC-9910 |
Found a match and recorded the IR signals with the JP1 tools to create the respective files.
_________________ Remotes; JP1.2: Comcast URC-1067, JP1.3: Insignia NS-RC02U-10A, JP1.4 OARI06G, JP2.1: Cox URC-8820-MOTO (still trying to figure out how to make them self-aware.) |
|
Back to top |
|
|
|