View previous topic :: View next topic |
Author |
Message |
Evan_s
Joined: 24 Mar 2007 Posts: 313
|
Posted: Sun Sep 09, 2007 2:10 pm Post subject: |
|
|
No need to mail anything to anyone if you have a cable. Just download what you've learned to your 9910 and use that to make an upgrade yourself. If you need help with that check http://www.hifi-remote.com/forums/viewtopic.php?t=1009 on the KM or RM sections. If you don't have a cable I'd recommend looking into one. It's well worth it IMO. |
|
Back to top |
|
|
pablo m
Joined: 08 Sep 2007 Posts: 2
|
Posted: Thu Sep 13, 2007 5:50 pm Post subject: |
|
|
Yea, I have a cable. Just didn't want to reinvent the wheel if someone else has already created a file. I'm not sure I'll have time to do it anytime soon.
Come on Herbie I'm counting on you (just kidding). |
|
Back to top |
|
|
whompus
Joined: 27 Apr 2005 Posts: 540
|
|
Back to top |
|
|
Drexl
Joined: 09 Dec 2007 Posts: 3
|
Posted: Mon Dec 31, 2007 3:39 am Post subject: |
|
|
I have the Nyko package and have tried the update file, but for some reason, none of the transport buttons on my 8810 except F.Rev and F.Fwd work. It doesn't matter what functions I assign to them.
What I have noticed is that this kit only emulates the buttons from the game controller - there is no audio or subtitle button, for instance, but of course these can be selected from that menu you get when you press Triangle. The Nyko remote has buttons for transport and menu/display, but the controller buttons have been mapped to these extra buttons. For example, the "Play" button on the Nyko remote is just Start, and the "Top Menu" button is Square, which actually brings up the Pop-up menu on the disc. The "Stop" button is Circle, and does not do what the real stop button does on the Bluetooth remote. (On the Nyko, it takes you to the screen where it prompts you to quit playback, rather than just stopping and going back to the XMB immediately like on the BT remote.) They just map them to the extra buttons for the sake of intuitiveness.
Now, the upgrade file has a different command for each Nyko button, but I suspect that when they reach the dongle, they point to the controller commands anyway.
I suppose it works well enough, but again, most of the transport buttons on my 8810 won't work for some reason. Whompus, did you have this issue with yours? |
|
Back to top |
|
|
whompus
Joined: 27 Apr 2005 Posts: 540
|
Posted: Mon Dec 31, 2007 6:55 pm Post subject: |
|
|
My 8811 as well as 6131 works just like the nyko remote does. That being said, I will say I dont like the nyko setup much. The only good it does is give basic function to a universal remote. What I dont like most is, if you boot the ps3 with the dongle connected it will assign the dongle to port 1. For games port 1 has to be assigned to a game controller. I will likely just get the bt remote for media use of the ps3. |
|
Back to top |
|
|
gfoster
Joined: 16 Oct 2004 Posts: 10
|
Posted: Tue Jan 06, 2009 4:06 pm Post subject: |
|
|
I just picked up the Intec PS3 IR remote from Future Shop (Canada) this week.
I've got a 6800B00 and have tried learning the 14 buttons, but can't seem to get a decent read on many of them.
- New batteries installed in both units.
- Setup -> 975
-> CD (1 on learning remote, up arrow on Intec), hold down intec button until two flashes.
-> 2 on learning remote, left arrow on Intec.
-> repeat for other buttons
EDIT: -> star/setup until two blinks to lock in
A few buttons work, but many don't. Standing in the same position, the Intec remote performs as expected.
What's the next step ?
Last edited by gfoster on Tue Jan 06, 2009 5:18 pm; edited 1 time in total |
|
Back to top |
|
|
mdavej Expert
Joined: 08 Oct 2003 Posts: 4523
|
Posted: Tue Jan 06, 2009 4:56 pm Post subject: |
|
|
That learning procedure doesn't sound quite right. Last step is usually Setup for 2 blinks to lock in, not another 975. If that's what you've been doing, you may not have been locking in the learns. On the finicky learns, try varying distance and duration (just a 1 sec press versus longer). |
|
Back to top |
|
|
gfoster
Joined: 16 Oct 2004 Posts: 10
|
Posted: Tue Jan 06, 2009 5:18 pm Post subject: |
|
|
Sorry yes.. last step should have read 'hold setup until 2 flashes'. That'll teach me to be typing and reading notes at the same time |
|
Back to top |
|
|
The Robman Site Owner
Joined: 01 Aug 2003 Posts: 21279 Location: Chicago, IL |
Posted: Tue Jan 06, 2009 5:23 pm Post subject: |
|
|
gfoster wrote: | A few buttons work, but many don't. Standing in the same position, the Intec remote performs as expected.
What's the next step ? |
Load a copy of your IR file (with the learns in it) to the Diagnosis Area folder in the file section, then start a new post in the Protocol Decodes forum. Include a link to the file in your post and explain which buttons work and which ones don't. _________________ Rob
www.hifi-remote.com
Please don't PM me with remote questions, post them in the forums so all the experts can help! |
|
Back to top |
|
|
gfoster
Joined: 16 Oct 2004 Posts: 10
|
|
Back to top |
|
|
|