View previous topic :: View next topic |
Author |
Message |
dmoos
Joined: 04 Sep 2007 Posts: 17 Location: Denver Co |
Posted: Tue Sep 18, 2007 1:30 pm Post subject: Looking for 15-1925 or similar Remote using SC410971P Chip |
|
|
Anyone know where I can find one of these older remotes, I need the chip to fix a Smartlinc Houselinc |
|
Back to top |
|
|
Silk
Joined: 26 May 2004 Posts: 7 Location: Florida |
Posted: Sun Sep 23, 2007 11:38 am Post subject: RE: Looking for 15-1925 or similar Remote using SC410971P Ch |
|
|
I've got a couple of unused 15-1919's. I only wanted the Plug n Power. Date code is 10A6. Never took them out of the box, much less opened them up, so I've got no idea if it uses a SC410971P, unless the Remote Chart showing them all using the 6805 makes it so. Got anything to swap? |
|
Back to top |
|
|
The Robman Site Owner
Joined: 01 Aug 2003 Posts: 21243 Location: Chicago, IL |
Posted: Sun Sep 23, 2007 2:21 pm Post subject: |
|
|
The 15-1919 uses the same chip as the Houselinc. _________________ Rob
www.hifi-remote.com
Please don't PM me with remote questions, post them in the forums so all the experts can help! |
|
Back to top |
|
|
dmoos
Joined: 04 Sep 2007 Posts: 17 Location: Denver Co |
Posted: Tue Oct 02, 2007 3:08 pm Post subject: |
|
|
Sorry it took me so long to post a reply, been busy wokring on a haunted house. What kinds of things would you be looking for, have some X10 stuff and other electronic stuff. Let me know what you would be looking for. |
|
Back to top |
|
|
Silk
Joined: 26 May 2004 Posts: 7 Location: Florida |
Posted: Fri Oct 05, 2007 9:57 am Post subject: |
|
|
I've got my place X10'ed. Plug n Power is Radio Shack branded X10. Could use a 3 way switch, fluorescent switch or any other cool things I don't already have. I need a better way to get the legs bridged, I couldn't seem to get it right with a resistor. Is Smartlinc Houselinc X10 compatible? If yes, I've got a bunch of new stuff I've been meaning to put up on eBay that you might like. In electronic stuff, you wouldn't happen to have 15 feet or so of 1/2 inch, 10 conductor ribbon cable laying around? I'm about to buy some on eBay. |
|
Back to top |
|
|
dmoos
Joined: 04 Sep 2007 Posts: 17 Location: Denver Co |
Posted: Fri Oct 05, 2007 11:54 am Post subject: |
|
|
I have a couple X10 Pro PLW03 and compainion PCW03 3-Way for up to 500W Incandescent lamp module. I also Have a RS100 which is a relay switch that I used for a fluoresent switch, it also has a compainion for 3-Way AS000, but can also be used stand alone. The only trick with the RS100 is it requires 3 wires at the switch, Hot, Neutral and Load. Diagram is at http://www.act-solutions.com/pdfs/PCCInst/rs100-1.pdf I also have a standard dryer Bridge. All of this stuff is in good condition, although used, I just upgraded to different equipment. Switches are almond in color. Yes, Smartlinc Houselink is X10 compatible. |
|
Back to top |
|
|
Silk
Joined: 26 May 2004 Posts: 7 Location: Florida |
Posted: Fri Oct 12, 2007 12:02 am Post subject: |
|
|
Is the dryer bridge 3 or 4 wire? |
|
Back to top |
|
|
dmoos
Joined: 04 Sep 2007 Posts: 17 Location: Denver Co |
Posted: Fri Oct 12, 2007 3:22 pm Post subject: |
|
|
It is a Smarthome SignalLinc Model 4816B2 3 conductor. http://www.smarthome.com/4816b2.html
You unplug your dryer, plug this into the outlet and plug your dryer into it. Outlet should look something like this:
L
\ / |
|
Back to top |
|
|
vickyg2003 Site Admin
Joined: 20 Mar 2004 Posts: 7073 Location: Florida |
Posted: Fri Oct 12, 2007 3:30 pm Post subject: |
|
|
I've got 2 old Comcast Navigators, URC-44000's lying around. I think they have an odd chip set. Are you still looking for these, or have you already made your deal? |
|
Back to top |
|
|
Silk
Joined: 26 May 2004 Posts: 7 Location: Florida |
Posted: Tue Oct 16, 2007 11:57 am Post subject: |
|
|
You mentioned the switches are almond. I hope it's only the RS100. If the PLW03's + PCW03 are white I'll swap you for those and the dryer bridge. |
|
Back to top |
|
|
|