View previous topic :: View next topic |
Author |
Message |
jon_armstrong Expert
Joined: 03 Aug 2003 Posts: 1238 Location: R.I.P. 3/25/2005 |
Posted: Thu Dec 18, 2003 3:32 pm Post subject: |
|
|
I just tried the following in KM Master v8.05
Make sure you set Button Codes: OBC
I entered 30 in OBC under function tab and the EFC and hex were calculated as shown:
Code: |
Setup TAB:
Remote: URC-881x / 801x / 601x
Device Type: SAT
Setup Code: 1601
Button Codes: OBC
Protocol Name: RECS80 (45)
Device Code: 5
Function Tab:
Functions OBC byte2 EFC ov Hex
power 030 238 84
|
_________________ -Jon |
|
Back to top |
|
|
xgamer123
Joined: 12 Dec 2003 Posts: 48
|
Posted: Thu Dec 18, 2003 5:42 pm Post subject: |
|
|
jon_armstrong,
Thanks, I've done all of keys and wrote to 8017. It all works now. I try to upload this setting file in KM format to here. But I can't find file attach function.
It's weird that KM re-calculate OBC to EFC/HEX after I reboot my PC. That's much easier to enter whole set of keys.
I'm going to open new topic for Closed Cation decoder after I send Prosat satellite all model remote control code. C U another topic. |
|
Back to top |
|
|
The Robman Site Owner
Joined: 01 Aug 2003 Posts: 21238 Location: Chicago, IL |
Posted: Thu Dec 18, 2003 5:49 pm Post subject: |
|
|
xgamer123 wrote: | Thanks, I've done all of keys and wrote to 8017. It all works now. I try to upload this setting file in KM format to here. But I can't find file attach function. |
There is no ATTACH function. You should load your upgrade file into the file section at Yahoo:
http://groups.yahoo.com/group/jp1/files/3.%20Device%20Codes/ _________________ Rob
www.hifi-remote.com
Please don't PM me with remote questions, post them in the forums so all the experts can help! |
|
Back to top |
|
|
Mark Pierson Expert
Joined: 03 Aug 2003 Posts: 3017 Location: Connecticut, USA |
Posted: Thu Dec 18, 2003 6:21 pm Post subject: |
|
|
xgamer123 wrote: | It's weird that KM re-calculate OBC to EFC/HEX after I reboot my PC. That's much easier to enter whole set of keys. |
I don't know if it's a language barrier or what, but I don't understand this statement. KM should calculate on the fly as you enter data. If you see the word "Calculate" in the status bar for more than a few seconds, then somehow Excel's auto-recalc got turned to manual. That can be reset to automatic by going to Tools|Options|Calulation, and selecting Automatic.
If you're try to say something else, I apologize for not understanding what you're saying. _________________ Mark |
|
Back to top |
|
|
xgamer123
Joined: 12 Dec 2003 Posts: 48
|
Posted: Thu Dec 18, 2003 6:30 pm Post subject: |
|
|
It doesn't matter, Mark. When I'd tried to enter OBC, I copy/paste to IR, and it was same HEX codes. After I rebooted my PC in hours later, it became function well. Hmmm I must miss something. Anyway, it works. |
|
Back to top |
|
|
xgamer123
Joined: 12 Dec 2003 Posts: 48
|
Posted: Fri Dec 19, 2003 1:34 pm Post subject: |
|
|
jon,
I opened Girder saved file for Prosat. This is beginning part and first key that I've learned from O.RC. If this is what you want. I'll post entire code for you.
<?xml version="1.0" encoding="UTF-8"?>
<Girder>
<Group Name="Prosat Remote Control" Identifier="277"
Enabled="TRUE">
<Command Name="0/1 Power" Identifier="279"
Enabled="TRUE">
<StateCount>1</StateCount>
<StateBegin>1</StateBegin>
<StateCurrent>1</StateCurrent>
<StateInvert>FALSE</StateInvert>
<OSD>FALSE</OSD>
<Submatch>FALSE</Submatch>
<Topmost>TRUE</Topmost>
<OneMatch>FALSE</OneMatch>
<UseVar>FALSE</UseVar>
<MatchHidden>FALSE</MatchHidden>
<MatchNum>1</MatchNum>
<ActionType>2</ActionType>
<ActionSubType>9</ActionSubType>
<sValue1>C:Filesremote
control.wav</sValue1>
<bValue1>FALSE</bValue1>
<bValue2>FALSE</bValue2>
<bValue3>FALSE</bValue3>
<EventString
Name="EventString" Identifier="507" Enabled="TRUE" Invert="FALSE"
Device="207"
IrStr="055E"></EventString>
</Command> |
|
Back to top |
|
|
|