View previous topic :: View next topic |
Author |
Message |
belgianguy36
Joined: 13 Apr 2005 Posts: 4
|
Posted: Fri Jun 24, 2005 3:40 pm Post subject: Problems with paralel interface on URC9960 |
|
|
HI,
I'm having troubles to communicate with my remote via a parallel interface. If I try to download from my remote, IR keeps telling me that there is no signature for my remote, but I do have the latest RDF file installed and the KASAKASO signature is present.
I already tried to lower the battery voltage by using a dummy battery so that i've got 4,5V battery power, but I still have the same problem.
I have a URC9960-B01 so normally this shouldn't be a problem. I tried to work via my laptop and desktop pc but always get the same problem.
The interface check gives no problem.
I seems that it was possible to download RAW data and after I tried to download, the red led came on two times. If the remote is connected to the interface, I can not operate the remote control.
I hope some of you guys know what the problem is. |
|
Back to top |
|
|
gfb107 Expert
Joined: 03 Aug 2003 Posts: 3411 Location: Cary, NC |
|
Back to top |
|
|
belgianguy36
Joined: 13 Apr 2005 Posts: 4
|
Posted: Sat Jun 25, 2005 2:40 am Post subject: |
|
|
Yes I did. When I launched IR for the very first time, the download went very good and I was able to store my basic configuration on harddisk, but when I tried it a second time I received the error message.
I even tried to reinstall IR but that didn't changed anything. |
|
Back to top |
|
|
lukas_cz
Joined: 21 Nov 2003 Posts: 17
|
Posted: Fri Oct 14, 2005 8:38 am Post subject: Re: Problems with paralel interface on URC9960 |
|
|
Hi,
what type of parallel cabel do you use? Simle or Ultra?
I've the same problem with my URC9960BJ5 and parallel simple cable.
Lukas |
|
Back to top |
|
|
|