View previous topic :: View next topic |
Author |
Message |
johnsfine Site Admin
Joined: 10 Aug 2003 Posts: 4766 Location: Bedford, MA |
Posted: Tue May 10, 2005 8:28 am Post subject: |
|
|
I did the test of loading the upgrade (protocol and device) into an 8910 and learning the 8 signals to a 15-1994 and decoding/examining the results.
The signals all came out as I intended, so I didn't make any mistakes in constructing the protocol or upgrade.
That still leaves the question of whether I correctly interpreted the original, especially but not limited to the question of whether all those doubled pulses were really a learning error due to a phase glitch.
My 15-1994 got perfectly consistent clean learns from my 8910. Those learned signals look VERY different from the original learns from the Somfy remote. But if I understood the protocol right, these short clean learns are the correct ones. |
|
Back to top |
|
|
Capn Trips Expert
Joined: 03 Oct 2003 Posts: 3990
|
Posted: Tue May 10, 2005 1:10 pm Post subject: |
|
|
The upgrade works fine. Thanks a lot!
I'll post the upgrade tomorrow (It's on my work computer (yikes!)) |
|
Back to top |
|
|
johnsfine Site Admin
Joined: 10 Aug 2003 Posts: 4766 Location: Bedford, MA |
Posted: Tue May 10, 2005 1:36 pm Post subject: |
|
|
I will fix the pid in that protocols.ini entry (I didn't mean to pick a pid that's already defined elsewhere in the file) and I've already written a notes section, and I'll commit the protocols.ini changes at sourceforge so it will be official the next time Greg releases RM.
Your "upgrade" is an RM file?
I'm not sure whether that will load correctly in RM after I change the pid (though if not, it shouldn't need much tweaking). |
|
Back to top |
|
|
johnsfine Site Admin
Joined: 10 Aug 2003 Posts: 4766 Location: Bedford, MA |
Posted: Tue May 10, 2005 1:51 pm Post subject: |
|
|
I posted an updated protocols.ini at
{link deleted - official version released}
that you can use until it is officially released with RM. |
|
Back to top |
|
|
Capn Trips Expert
Joined: 03 Oct 2003 Posts: 3990
|
Posted: Thu May 12, 2005 2:05 am Post subject: |
|
|
HERE (at last) is the "final" RM upgrade.
It works BETTER than the OEM remote (I suspect the JP1 remote sends "cleaner" signals than the OEM remote).
Now I am truly down to a single remote in each of my viewing areas!
Thanks for the expert analysis and work, John. This group is really something else! |
|
Back to top |
|
|
Capn Trips Expert
Joined: 03 Oct 2003 Posts: 3990
|
Posted: Wed Jun 28, 2006 5:11 am Post subject: |
|
|
Resurrecting this old thread, I have recently discovered that the OEM remote, in addition to "up" and "down" also can send "stop" signals to each of the four "channels" (by pressing both the UP and DOWN buttons simultaneously!)
So I have relearned ALL of the signals (there are now 12 vs. 8) and posted the learned IR file in the diagnosis area.
The "STOP"s all decode as OBC 0 for the respective Device codes John Fine created, (UP=OBC-1, and DOWN=OBC-2) so that's consistent, and decodeIR seems to decode them properly, since the upgrade works perfectly.
The decoder does NOT, however, decode the sub-device, which still has to be manually calculated using John's notes for the protocol.
I thought that perhaps having four additional learned signals to analyse might help crack the nut on this odd protocol, but in the spirit of "if it works, don't fix it", I'm not insisting on it. It's simply academic. _________________ Beginners - Read this thread first
READ BEFORE POSTING or your post will be DELETED!
Remotes: OFA XSight Touch, AR XSight Touch
TVs: LG 65" Smart LED TV; Samsung QN850BF Series - 8K UHD Neo QLED LCD TV
RCVR: Onkyo TX-SR875; Integra DTR 40.3
DVD/VCR: Pioneer DV-400VK (multi-region DVD), Sony BDP-S350 (Blu-ray), Toshiba HD-A3 (HD-DVD), Panasonic AG-W1 (Multi-system VCR);
Laserdisc: Pioneer CLD-D704.
Amazon Firestick
tape deck: Pioneer CT 1380WR (double cassette deck)
(But I still have to get up for my beer) |
|
Back to top |
|
|
The Robman Site Owner
Joined: 01 Aug 2003 Posts: 21279 Location: Chicago, IL |
Posted: Wed Jun 28, 2006 11:44 am Post subject: |
|
|
The formula that John posted earlier for the checksum still works for the 4 new buttons.
I have taken the liberty of tweeking the protocol a little bit so that it uses one byte commands.
Here is a new upgrade that should (hopefully) replicate all 12 buttons. I have assigned the buttons as follows:
CH1 up/down/stop --> 1/4/7
CH2 up/down/stop --> 2/5/8
CH3 up/down/stop --> 3/6/9
ALL up/down/stop --> VOL+, VOL-, MUTE
Upgrade Code 0 = DD 4D (Home Auto/1357) COMFY KM (KM v8.43)
A1 00 C1 0C A1 99 B5 63 5B 77 22 1A 36 8E 4D 0C
End
Upgrade protocol 0 = 01 A1 (S3C8+) PB v3.11
3F 9D 01 8B 12 85 05 05 04 01 4E 00 F0 00 9A 01
A4 04 9C 04 0C 00 DE E4 03 04 F0 04 56 03 F0 20
11 8D 01 46
End
Here's the KM and PB files...
http://www.hifi-remote.com/forums/dload.php?action=file&file_id=3381 _________________ Rob
www.hifi-remote.com
Please don't PM me with remote questions, post them in the forums so all the experts can help! |
|
Back to top |
|
|
Capn Trips Expert
Joined: 03 Oct 2003 Posts: 3990
|
Posted: Mon Jul 10, 2006 5:24 pm Post subject: |
|
|
Well, Rob,
I finally got around to testing this. I didn't bother sooner, since I had a working upgrade, and this effectively saves 5 bytes (Protocol upgrade is 7 bytes bigger, device upgrade is 12 bytes smaller).
Bad news - it doesn't work. Of all of the signals, the only one that worked - and inconsistently, at that, was the channel 2 up command. None of the others worked at all. So I'm sticking with the older construct, with devices and OBC required to be selected and 2-byte functions as a result.
If there's any tweaks you want to test, I'll be happy to do so. But I'm happy with the working upgrade. _________________ Beginners - Read this thread first
READ BEFORE POSTING or your post will be DELETED!
Remotes: OFA XSight Touch, AR XSight Touch
TVs: LG 65" Smart LED TV; Samsung QN850BF Series - 8K UHD Neo QLED LCD TV
RCVR: Onkyo TX-SR875; Integra DTR 40.3
DVD/VCR: Pioneer DV-400VK (multi-region DVD), Sony BDP-S350 (Blu-ray), Toshiba HD-A3 (HD-DVD), Panasonic AG-W1 (Multi-system VCR);
Laserdisc: Pioneer CLD-D704.
Amazon Firestick
tape deck: Pioneer CT 1380WR (double cassette deck)
(But I still have to get up for my beer) |
|
Back to top |
|
|
|