View previous topic :: View next topic |
Author |
Message |
mrsayre
Joined: 30 Oct 2003 Posts: 2
|
Posted: Thu Oct 30, 2003 11:58 pm Post subject: daewoo dvc3000 |
|
|
I recently bought a Daewoo DVD/VCR combo. I have a RS 15-2104 remote. I need the device codes for IR.
Thanks |
|
Back to top |
|
|
usblipitor
Joined: 10 Oct 2003 Posts: 516 Location: Greenbelt, MD |
Posted: Fri Oct 31, 2003 8:15 am Post subject: |
|
|
I did not see any upgrade files for the 3000 model, but for the 5000 model there was an upgrade you could try: Daewoo 5000
To use this file as you already probably know you will need to also download IR and KM from the JP1 Files _________________ -Steve
Beginner's Guide
CodeSearchFAQ
JP1Files |
|
Back to top |
|
|
johnsfine Site Admin
Joined: 10 Aug 2003 Posts: 4766 Location: Bedford, MA |
Posted: Fri Oct 31, 2003 8:21 am Post subject: |
|
|
If you have a JP1 cable and the original (Daewoo) remote, you can learn a few signals from the Daewoo remote to the 15-2104, then decode them with IR.EXE. Post the information (protocol name, device and subdevice numbers) from those decodes and we can tell you how to best proceed.
I haven't looked by Daewoo DVD/VCR combo's, but I remember previous threads about Daewoo DVDs. They change their IR signals entirely between models, sometimes between models with very similar model numbers. I think that means they're rebranding devices from a variety of manufacturers. It does mean that without an exact match of model number, you can't rely on codes found by someone else. |
|
Back to top |
|
|
The Robman Site Owner
Joined: 01 Aug 2003 Posts: 21238 Location: Chicago, IL |
Posted: Fri Oct 31, 2003 9:58 am Post subject: |
|
|
I think this question was pretty much answered by "The #1 Code Search FAQ and it's answer (PLEASE READ FIRST)" sticky thread at the top of this forum. _________________ Rob
www.hifi-remote.com
Please don't PM me with remote questions, post them in the forums so all the experts can help! |
|
Back to top |
|
|
mrsayre
Joined: 30 Oct 2003 Posts: 2
|
Posted: Sat Nov 01, 2003 12:15 am Post subject: I got it working |
|
|
It appears that the version of KM I was using was out of date. Thanks for the help though. I guess once I verify that it is working I'll try to post the info. |
|
Back to top |
|
|
|