JP1 Remotes Forum Index JP1 Remotes


FAQFAQ SearchSearch 7 days of topics7 Days MemberlistMemberlist UsergroupsUsergroups RegisterRegister
ProfileProfile Log in to check your private messagesLog in to check your private messages Log inLog in

Extender /Advanced codes question?

 
Post new topic   Reply to topic    JP1 Remotes Forum Index -> JP1 - Extenders
View previous topic :: View next topic  
Author Message
mvh_2000



Joined: 27 Jun 2004
Posts: 52

PostPosted: Sun Jun 27, 2004 9:08 am    Post subject: Extender /Advanced codes question? Reply with quote

Hi, I’m new the hobby. I listed my setup below.

8811 Remote
Extender 3 installed
Panasonic TV code 0250

Now my problem, I could not find the advanced code for the “Aspect” button in the printed document of codes for the TV_0250. So I did a learn function and found this info:{OBC=222}{Hex= $84} {EFC=238}. The function worked fine on the remote. I then installed the Extender and lost the functionality of the learn feature as the doc states. So I added the info above to the keymoves and it does not work? Any ideas??

Thanks
Mike
Back to top
View user's profile Send private message
johnsfine
Site Admin


Joined: 10 Aug 2003
Posts: 4766
Location: Bedford, MA

PostPosted: Sun Jun 27, 2004 9:12 am    Post subject: Reply with quote

With that device it's important to check the subdevice value in the decode of the learned signals. A few of the commands have a different subdevice than most of the commands.

Those few cannot be generated using TV/0250.

One way to generate them is to make and install a device upgrade with the right protocol, device and subdevice, but with no functions assigned to buttons, then use that setup code as a source for KeyMoves.
Back to top
View user's profile Send private message Send e-mail Visit poster's website
mvh_2000



Joined: 27 Jun 2004
Posts: 52

PostPosted: Sun Jun 27, 2004 9:27 am    Post subject: Reply with quote

Thanks for the fast reply! Could you point me in the direction for some type of doc. I can read on how to do this?? I took a look and the device = 128 and the sub = 4

Thanks
Mike
Back to top
View user's profile Send private message
Mark Pierson
Expert


Joined: 03 Aug 2003
Posts: 3009
Location: Connecticut, USA

PostPosted: Sun Jun 27, 2004 9:58 am    Post subject: Reply with quote

mvh_2000 wrote:
the device = 128 and the sub = 4

TV/0250 is Panasonic:128.0, so you'll need an empty (no buttons defined) upgrade for Panasonic:128.4. To create it (using KM or RM), follow these steps:

  • Remote = 881x
  • Device Type = TV
  • Setup Code = 1250
  • Protocol Name = Panasonic
  • Main Device = 128
  • Sub Device = 4
  • Copy the resulting Device Upgrade Code and paste it into IR as a new Device.
  • Create a key move in IR (Key Moves tab):
    • Bound Device = TV
    • Bound Key = an unused button of your choosing
    • Device Type = TV
    • Setup Code = 1250
    • EFC = 238
  • Upload to the remote.
  • Test the key move

_________________
Mark
Back to top
View user's profile Send private message Send e-mail Visit poster's website
jon_armstrong
Expert


Joined: 03 Aug 2003
Posts: 1238
Location: R.I.P. 3/25/2005

PostPosted: Sun Jun 27, 2004 10:05 am    Post subject: Reply with quote

The easiest way is to do a "no button" upgrade:

Upgrade Code 0 = 04 E2 (TV/1250)
C9 00 01 DE BF FB FE DF
End

Add that device in IR. Don't assign it to any device button. Then Key Move TV/1250 EFC 238 to the button of your choice on your TV device.

BTW, 128.4 also has discrete component inputs 1 and 2 for some Panasonic models of HDTV's. Here is the list that I know of:
OBC EFC
124 004 Discrete Component 1 Input Select
125 008 Discrete Component 2 Input Select
201 049 Discrete Aspect - Zoom
209 113 Discrete Aspect - Full
222 238 Aspect
_________________
-Jon
Back to top
View user's profile Send private message Send e-mail Visit poster's website
mvh_2000



Joined: 27 Jun 2004
Posts: 52

PostPosted: Sun Jun 27, 2004 10:21 am    Post subject: Reply with quote

Thank you both it works!! I'm sure I will have some more questions later!!

Mike
Back to top
View user's profile Send private message
Display posts from previous:   
Post new topic   Reply to topic       JP1 Remotes Forum Index -> JP1 - Extenders All times are GMT - 5 Hours
Page 1 of 1

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum


 

Powered by phpBB © 2001, 2005 phpBB Group
Get Smart! the band's official homepage Rockabilly Central