The Robman Site Owner
Joined: 01 Aug 2003 Posts: 21254 Location: Chicago, IL |
Posted: Tue May 30, 2023 8:55 am Post subject: Epson EH-TW9400 projector |
|
|
Split from here:
http://www.hifi-remote.com/forums/viewtopic.php?t=103282
Tanzbaerli wrote: | I just learned the basic necessary commands at first (EPSON EH-TW9400 is not supported out of the box) and planned to add other commands after a while when really needed for common use. So i run into this problem. |
What protocol/device codes does your EPSON EH-TW9400 projector use? (In other words, when you look at the learned signals, do they show a protocol and device codes?). If they show NEC2 with device code 131, sub-device code 85, then it uses the same codeset as most other Epson projectors.
http://www.hifi-remote.com/forums/dload.php?action=file&file_id=26728
If it's not NEC2 131.85, please post your RMIR file and we'll make an upgrade file for you. _________________ Rob
www.hifi-remote.com
Please don't PM me with remote questions, post them in the forums so all the experts can help!
Last edited by The Robman on Wed Jun 07, 2023 9:49 am; edited 3 times in total |
|