View previous topic :: View next topic |
Author |
Message |
fanboy
Joined: 10 Jun 2022 Posts: 3
|
Posted: Fri Jun 10, 2022 1:13 pm Post subject: interpreting code files |
|
|
Hi!
I came here looking to control my Honeywell HS-1665 fan for which I lost the remote.
A web search showed that this site has a thread and an uploaded file for a Honeywell fan so I thought I'd check it out and perhaps see if I could use it as a starting point for finding the codes for my fan.
I do not have a JP1, but I can program a microcontroller and blink an IR LED if I know what the timings need to be.
In this uploaded file:
http://www.hifi-remote.com/forums/dload.php?action=file&file_id=234
there is an excel spreadsheet with some IR codes in column A which look like "1F 00 00 00" and "1F 2C 55 00", etc. From other files in that archive I gather that the modulation frequency is 38 KHz.
So I just need some pointers on how to translate the sequence "1F 2C 55 00" into blinks of an IR LED.
Thanks! |
|
Back to top |
|
![](templates/subSilver/images/spacer.gif) |
The Robman Site Owner
Joined: 01 Aug 2003 Posts: 21254 Location: Chicago, IL |
Posted: Fri Jun 10, 2022 4:06 pm Post subject: |
|
|
If you're going to write code for a microcontroller, would I be right in assuming you have at least a basic knowledge of what remote control IR signals look like? And if so, are you familiar with Pronto Hex?
If you answered no to either of those questions, I don't think you can do this task and it would be much easier to just buy a JP1 remote and load the upgrade into it.
If you answered yes to both of those questions, there is Pronto hex in the spreadsheet that you downloaded, that should be all you need to recreate the signals. _________________ Rob
www.hifi-remote.com
Please don't PM me with remote questions, post them in the forums so all the experts can help! |
|
Back to top |
|
![](templates/subSilver/images/spacer.gif) |
fanboy
Joined: 10 Jun 2022 Posts: 3
|
Posted: Sat Jun 11, 2022 8:10 am Post subject: |
|
|
Thanks for the information. I am familiar with the structure of IR codes and the information given in the Pronto Hex page.
So now my question is how would I find the timing data for the various kinds of bursts, e.g. the lead-in burst, logical 1, logical 0, lead-out burst? Is it perhaps in one of the .txt files in the archive or the IR-Honeywell.ir file somewhere?
Thanks again! |
|
Back to top |
|
![](templates/subSilver/images/spacer.gif) |
The Robman Site Owner
Joined: 01 Aug 2003 Posts: 21254 Location: Chicago, IL |
Posted: Sat Jun 11, 2022 8:47 am Post subject: |
|
|
That information is all built into the Pronto hex. If you look at the "Decodes from CCF file" tab, the upper section is the raw Pronto hex and the lower section is the timing data, and it's derived from the Pronto hex using Excel formula. _________________ Rob
www.hifi-remote.com
Please don't PM me with remote questions, post them in the forums so all the experts can help! |
|
Back to top |
|
![](templates/subSilver/images/spacer.gif) |
fanboy
Joined: 10 Jun 2022 Posts: 3
|
Posted: Sat Jun 11, 2022 12:20 pm Post subject: |
|
|
Thanks for pointing out that tab - I completely missed it! |
|
Back to top |
|
![](templates/subSilver/images/spacer.gif) |
|