BobH
Joined: 13 May 2011 Posts: 12
|
Posted: Thu May 12, 2022 11:18 am Post subject: Discrete power functions for a Magnavox MDR513H/F7 DVD/DVR |
|
|
My JP1 Remote: URC-10820N
Device I want to control: Magnavox HDD & DVD Player/Recorder - Model: MDR513H/F7
The closest Upgrade I found for this was in DVR/PVR, and it was named: "MDR515h/f7" and stored as a .txt file.
It sounded real close, so I downloaded it and read the .txt file. In there I found the words "discreteON" and "discreteOFF",
as this:
,,,,,,,,,,,,,
,,,discreteON,,,,,,,,,,3E
,,,discreteOFF,,,,,,,,,,3F
,,,,,,,,,,,,,
,,,,,,,,,,,,,
but upon loading this file into RMIR, these functions disappear. In fact, everything after the "dubbing" function (see below) goes away.
The OBC appears to be the 2nd value in the comma delimited line and everything beyond this point has no OBC value.
recmode,057,,,,,,,,,,,,
dubbing,058,,phantom1,,,,,,,,,,3A
pip on/off,,,phantom2,,,,,,,,,,3B
pip swap,,,phantom3,,,,,,,,,,3C
It looks like the only value left on the discreteON/discreteOFF functions is 3E/3F (hex ??). I tried loading this and added two buttons
using these values in the HEX column, but they didn't work when I tried them on my DVD/DVR. All of the standard buttons 0-9, etc. from
this load worked just fine. Is there anything I can do to figure out the Discrete On and Off functions with what appears in the upgrade
("MDR515h/f7") posted.
Thank you for looking at this,
Bob
MODERATOR EDIT: The file in question:
http://www.hifi-remote.com/forums/dload.php?action=file&file_id=9716 |
|