JP1 Remotes Forum Index JP1 Remotes


FAQFAQ SearchSearch 7 days of topics7 Days MemberlistMemberlist UsergroupsUsergroups RegisterRegister
ProfileProfile Log in to check your private messagesLog in to check your private messages Log inLog in

Channel Master Stream+ CM-7600 Discrete Power-ON / Power-OFF

 
Post new topic   Reply to topic    JP1 Remotes Forum Index -> Discrete Codes
View previous topic :: View next topic  
Author Message
markp_13



Joined: 07 Jan 2020
Posts: 5
Location: Rochester Hills, MI

PostPosted: Fri Jan 17, 2020 4:50 pm    Post subject: Channel Master Stream+ CM-7600 Discrete Power-ON / Power-OFF Reply with quote

1. Device: Channel Master Stream+ CM-7600
2. Type of device: Over-The-Air DVR
3. Year: Released in 2016
4. JP1/UEI Remote model: UEI 1056B03
5. Do you have a JP1 cable? Yes
6. Still have original remote? Yes (...only has power toggle, not discrete)
7. Checked the file section? Yes (...the rmdu only has power toggle)
8. Checked Pronto file section (at R/C)? Yes
9. Partially working setup code? Yes, power toggle works
10. Learning remote question? No
11. Have you tried the JP1 Lookup Tool? No
12. If you have a OARUSB04G, URC-6440 (or similar) remote, have you tried simpleset.com? N/A

The power toggle works on the UEI remote using the rmdu file.
Looking for discrete on/off.

Thanks!
Back to top
View user's profile Send private message
The Robman
Site Owner


Joined: 01 Aug 2003
Posts: 20235
Location: Chicago, IL

PostPosted: Fri Jan 17, 2020 5:06 pm    Post subject: Reply with quote

I can't tell from your post which rmdu file you are using.
_________________
Rob
www.hifi-remote.com
Please don't PM me with remote questions, post them in the forums so all the experts can help!
Back to top
View user's profile Send private message Visit poster's website
markp_13



Joined: 07 Jan 2020
Posts: 5
Location: Rochester Hills, MI

PostPosted: Fri Jan 17, 2020 5:28 pm    Post subject: Reply with quote

I found an rmdu in the Files / Device Upgrade section for the device.
In "DVR / PVR"

File name of the rmdu is...
"Channel Master Stream+.rmdu"

It has all the functions of the original remote. But no discrete on/off.

mark
Back to top
View user's profile Send private message
The Robman
Site Owner


Joined: 01 Aug 2003
Posts: 20235
Location: Chicago, IL

PostPosted: Fri Jan 17, 2020 6:13 pm    Post subject: Reply with quote

Normally folks post a link to files they want others to look at, as it both saves them time searching and it eliminates the possibility of the helper picking the wrong file.

I assume this is the file?
http://www.hifi-remote.com/forums/dload.php?action=file&file_id=25135

I have created a bunch of dummy upgrades for you which represent all the gap OBC codes, the idea being that you test these upgrades and if any of the buttons do anything, make a note of it and we'll add it to the main upgrade. I've also included a spreadsheet to show which OBC is on each button. In addition, I have created an RMIR file with all the upgrades added. Before you try loading this into your remote, be sure to save your current RMIR file, so you can restore it afterwards.

http://www.hifi-remote.com/forums/dload.php?action=file&file_id=25810
_________________
Rob
www.hifi-remote.com
Please don't PM me with remote questions, post them in the forums so all the experts can help!
Back to top
View user's profile Send private message Visit poster's website
markp_13



Joined: 07 Jan 2020
Posts: 5
Location: Rochester Hills, MI

PostPosted: Mon Jan 20, 2020 11:05 am    Post subject: Reply with quote

Thank you for the help Rob!!!

I tried all 5 upgrades that you created. My Stream+ device responded with an action to 6 of the codes. There were another 9 codes that the light on the Stream+ blinked (...as though receiving a command) but did not do anything.

But one of the codes that did work was a discrete Power-OFF (upgrade test3 - "Down")

I can post all my findings in a Reply, or update the spreadsheet, post the RMIR file I used, etc...
Let me know the best way to communicate this (please bear with me as I learn the etiquette of this forum Smile

Thanks again!

-mark
Back to top
View user's profile Send private message
The Robman
Site Owner


Joined: 01 Aug 2003
Posts: 20235
Location: Chicago, IL

PostPosted: Mon Jan 20, 2020 11:15 am    Post subject: Reply with quote

The best option would be to create a modified version of the upgrade (RMDU file) with the additional OBCs included in the functions list. I would include the 9 that only blinked, labeling them as such, just in case a future user finds that they do something on his device.

Alternatively, you could just list the OBCs here as a reply and I'll modify the upgrade.

As you found a discrete off code, it's very likely that there is also a discrete on, but to test for it, you would need to run through all the upgrades again with the device turned off. If you do this, I would recommend starting with test3 and start with the OBCs close to the OFF code. It's also possible that it's on of those 9 "do nothing" codes.
_________________
Rob
www.hifi-remote.com
Please don't PM me with remote questions, post them in the forums so all the experts can help!
Back to top
View user's profile Send private message Visit poster's website
markp_13



Joined: 07 Jan 2020
Posts: 5
Location: Rochester Hills, MI

PostPosted: Fri Jan 24, 2020 8:45 pm    Post subject: Reply with quote

Hi Rob,
I have an upgrade file for this device that I can upload. Let me know if this should go in the diagnostics section or the regular upgrade section.

Thanks again for the help.

Mark
Back to top
View user's profile Send private message
The Robman
Site Owner


Joined: 01 Aug 2003
Posts: 20235
Location: Chicago, IL

PostPosted: Sat Jan 25, 2020 9:11 am    Post subject: Reply with quote

Regular upgrade section please. Please list the new codes here too.
_________________
Rob
www.hifi-remote.com
Please don't PM me with remote questions, post them in the forums so all the experts can help!
Back to top
View user's profile Send private message Visit poster's website
mdavej
Expert


Joined: 08 Oct 2003
Posts: 4225

PostPosted: Sat Jan 25, 2020 9:59 am    Post subject: Reply with quote

Id rather see the original updated than have a second, nearly identical upgrade for the same device.
Back to top
View user's profile Send private message
The Robman
Site Owner


Joined: 01 Aug 2003
Posts: 20235
Location: Chicago, IL

PostPosted: Sat Jan 25, 2020 10:20 am    Post subject: Reply with quote

Agreed, so Mark, please just list the codes here and I'll add them to the original upgrade.
_________________
Rob
www.hifi-remote.com
Please don't PM me with remote questions, post them in the forums so all the experts can help!
Back to top
View user's profile Send private message Visit poster's website
markp_13



Joined: 07 Jan 2020
Posts: 5
Location: Rochester Hills, MI

PostPosted: Mon Mar 29, 2021 12:18 pm    Post subject: Channel Master Stream+ CM-7600 Discrete Power-ON/Power-OFF Reply with quote

Power On - EFC5 (00066), EFC (066), OBC (143), Hex (0E)
Power Off - EFC5 (00062), EFC (062), OBC (142), Hex (8E)
Live TV - EFC5 (00201), EFC (201), OBC (97), Hex (79)
Back to top
View user's profile Send private message
Display posts from previous:   
Post new topic   Reply to topic       JP1 Remotes Forum Index -> Discrete Codes All times are GMT - 5 Hours
Page 1 of 1

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum


 

Powered by phpBB © 2001, 2005 phpBB Group
Get Smart! the band's official homepage Rockabilly Central