View previous topic :: View next topic |
Author |
Message |
jackching
Joined: 27 Feb 2018 Posts: 125
|
|
Back to top |
|
|
The Robman Site Owner
Joined: 01 Aug 2003 Posts: 21246 Location: Chicago, IL |
Posted: Tue Nov 24, 2020 9:44 am Post subject: |
|
|
Are there any indications that this is a UEI remote, and is this a REALLY old remote?
This has an exposed CPU chip and a separate EEPROM chip, which is the format used for REALLY early JP1 remotes. So, if this is a UEI remote, you can indeed hook a JP1 cable up to it, but notice that I said JP1, not JP1.x, which is the type of cable you are currently using. To use your current JP1.x (FTDI) cable, you would need a JP1 Adapter. Alternatively, if you have a computer that has an old LPT1 printer port, you could make an old "simple" JP1 cable (it just requires 2 resistors and a diode, hence the simple name).
So, even if this is a UEI remote, is it worth the effort?
_________________ Rob
www.hifi-remote.com
Please don't PM me with remote questions, post them in the forums so all the experts can help! |
|
Back to top |
|
|
jackching
Joined: 27 Feb 2018 Posts: 125
|
Posted: Tue Nov 24, 2020 12:33 pm Post subject: |
|
|
The Robman wrote: | Are there any indications that this is a UEI remote, and is this a REALLY old remote?
This has an exposed CPU chip and a separate EEPROM chip, which is the format used for REALLY early JP1 remotes. So, if this is a UEI remote, you can indeed hook a JP1 cable up to it, but notice that I said JP1, not JP1.x, which is the type of cable you are currently using. To use your current JP1.x (FTDI) cable, you would need a JP1 Adapter. Alternatively, if you have a computer that has an old LPT1 printer port, you could make an old "simple" JP1 cable (it just requires 2 resistors and a diode, hence the simple name).
So, even if this is a UEI remote, is it worth the effort? |
I cannot confirm that it is UEI and is probably not worth the trouble. Even though it is currently in use and I would have like to add some devices to it, I probably wont bother trying. Is there such thing as a universal UHF remote? |
|
Back to top |
|
|
The Robman Site Owner
Joined: 01 Aug 2003 Posts: 21246 Location: Chicago, IL |
Posted: Tue Nov 24, 2020 1:47 pm Post subject: |
|
|
Do you have a user manual for the remote, and if so, do the setup codes look like UEI setup codes? If you can find a remote online that looks like yours, please post a link to the photo, or take a photo and post it, and if you can find a link to a copy of the user manual, I can check if it sounds like a UEI remote.
Assuming it is, you evidently have the skills to solder wires to make a connector, so I can tell you how to hook one up. I would just need you to read off the chip number so I can look up its pinout. One of the wires will go to the RESET line of the main chip, the rest will go to the EEPROM chip.
And then, of course, given that this would be a JP1 remote, you would either need one of those adapters, or you would need an old computer that has a printer port. I know you have the ability to make a printer port JP1 cable.
As for the RF remote question, there has been some development in recent years but I haven't really kept up with it, so someone else would have to jump in that question. _________________ Rob
www.hifi-remote.com
Please don't PM me with remote questions, post them in the forums so all the experts can help! |
|
Back to top |
|
|
jackching
Joined: 27 Feb 2018 Posts: 125
|
|
Back to top |
|
|
3FG Expert
Joined: 19 May 2009 Posts: 3368
|
|
Back to top |
|
|
jackching
Joined: 27 Feb 2018 Posts: 125
|
Posted: Tue Nov 24, 2020 6:30 pm Post subject: |
|
|
Perfect. Saves a lot of trouble |
|
Back to top |
|
|
ckeays
Joined: 12 Jan 2015 Posts: 131 Location: Toronto, Ontario |
Posted: Thu Nov 26, 2020 11:41 am Post subject: |
|
|
jackching wrote: | I would have like to add some devices to it, I probably wont bother trying. |
The remote you have transmits RF/IR ONLY for the Bell receiver. It transmits only IR for all the other devices.
What you can do is use a UEI infrared remote and move the receiver to the same room as all other devices. I use an atlas 1056B03, You can find them used on kijiji, look for a rogers cable box remote, they are easy to find.
There are upgrades in the download section to use a UEI remote for the dish (bell in your case, same thing exactly) protocol. Then easily add the other devices using the JP1 software. These Bell remotes are old and the codes for newer devices may not work.
Since my Bell receiver is in another area of my house I use a homemade IR repeater only for the bell.
If you need any help, just ask. I have the files readily available i can send them to you or upload. (you will need the remote address from the system info screen) |
|
Back to top |
|
|
jackching
Joined: 27 Feb 2018 Posts: 125
|
Posted: Mon Nov 30, 2020 8:22 am Post subject: |
|
|
ckeays wrote: | jackching wrote: | I would have like to add some devices to it, I probably wont bother trying. |
The remote you have transmits RF/IR ONLY for the Bell receiver. It transmits only IR for all the other devices.
What you can do is use a UEI infrared remote and move the receiver to the same room as all other devices. I use an atlas 1056B03, You can find them used on kijiji, look for a rogers cable box remote, they are easy to find.
There are upgrades in the download section to use a UEI remote for the dish (bell in your case, same thing exactly) protocol. Then easily add the other devices using the JP1 software. These Bell remotes are old and the codes for newer devices may not work.
Since my Bell receiver is in another area of my house I use a homemade IR repeater only for the bell.
If you need any help, just ask. I have the files readily available i can send them to you or upload. (you will need the remote address from the system info screen) |
Yes i thought of that option when i was originally hooking it up but it is a bedroom receiver and the television is mounted to the wall. There is no room for a stand under the tv because we walk there all the time. The receiver is also a dual tuner hooked to two televisions. It wouldn't be worth while doing this because I have it in the basement now running two different TVs by means of two RF remotes. |
|
Back to top |
|
|
ckeays
Joined: 12 Jan 2015 Posts: 131 Location: Toronto, Ontario |
Posted: Mon Nov 30, 2020 12:49 pm Post subject: |
|
|
My receiver is installed in the basement just to eliminate clutter, and I use a homemade wired IR repeater.
You can buy replacement UHF remotes, however they don't work well with newer TV's and other Infrared devices (or better, the codes are obsolete).
Looking at the picture you uploaded the UHF key is missing on the remote. The plastic insert at the bottom of the remote is not there. The remote won't work if the key is not present. My remote has the black key for UHF only as I have an older receiver.
I got tired of replacing the UHF remotes. (the wife drops the remote almost daily) so i went for IR remote. It's cheap and works on all of my other IR equipment.
If you are thinking of using an infrared repeater you should know that the frequency of this remote is 57 KHz in satellite mode. Not all infrared repeaters work well at this frequency, they usually work at or around 38 KHz. This is why I made my own.
You can build a wireless one, i got the idea from this like here:
http://www.markwylie.ca/2013/11/bell-dish-network-ir-to-uhf-pro_2.html |
|
Back to top |
|
|
jackching
Joined: 27 Feb 2018 Posts: 125
|
Posted: Mon Nov 30, 2020 4:37 pm Post subject: |
|
|
ckeays wrote: | My receiver is installed in the basement just to eliminate clutter, and I use a homemade wired IR repeater.
You can buy replacement UHF remotes, however they don't work well with newer TV's and other Infrared devices (or better, the codes are obsolete).
Looking at the picture you uploaded the UHF key is missing on the remote. The plastic insert at the bottom of the remote is not there. The remote won't work if the key is not present. My remote has the black key for UHF only as I have an older receiver.
I got tired of replacing the UHF remotes. (the wife drops the remote almost daily) so i went for IR remote. It's cheap and works on all of my other IR equipment.
If you are thinking of using an infrared repeater you should know that the frequency of this remote is 57 KHz in satellite mode. Not all infrared repeaters work well at this frequency, they usually work at or around 38 KHz. This is why I made my own.
You can build a wireless one, i got the idea from this like here:
http://www.markwylie.ca/2013/11/bell-dish-network-ir-to-uhf-pro_2.html |
That quote about the missing key shows that you dont know what your talking about. The remote works fine without the key. It's just to prevent the switch on the bottom of the remote from being moved by people with nosey hands. I had to remove the key because the switch setting had to be moved for dual RF setup on one receiver so they would not conflict with each other. I didnt have a replacement key for that switch setting. |
|
Back to top |
|
|
ckeays
Joined: 12 Jan 2015 Posts: 131 Location: Toronto, Ontario |
Posted: Mon Nov 30, 2020 5:50 pm Post subject: |
|
|
jackching wrote: | That quote about the missing key shows that you dont know what your talking about. |
Why do you feel you need to insult someone who is trying to help you? You could have said that I was incorrect which is what most people do.
here read this, pages 2 & 3:
Yes the key switches the switch you mentioned, but if you don't have the right key you could try and guess which position the switch could be in. My remote would not work without the black UHF key (because of the older receiver I mentioned) . |
|
Back to top |
|
|
jackching
Joined: 27 Feb 2018 Posts: 125
|
Posted: Mon Nov 30, 2020 7:31 pm Post subject: |
|
|
ckeays wrote: | jackching wrote: | That quote about the missing key shows that you dont know what your talking about. |
Why do you feel you need to insult someone who is trying to help you? You could have said that I was incorrect which is what most people do.
here read this, pages 2 & 3:
Yes the key switches the switch you mentioned, but if you don't have the right key you could try and guess which position the switch could be in. My remote would not work without the black UHF key (because of the older receiver I mentioned) . |
My apologies. Im having a bad day. Wasnt just you i insulted haha |
|
Back to top |
|
|
|