View previous topic :: View next topic |
Author |
Message |
n8nagel
Joined: 03 Jun 2018 Posts: 185
|
Posted: Sun May 24, 2020 8:25 pm Post subject: Sharp BD-HP24U Blu Ray player discrete off? |
|
|
1. Device: Sharp HP24U
2. Type of device: Blu Ray Player
3. Year: unknown
4. JP1/UEI Remote model: Xsight Color
5. Do you have a JP1 cable? N/A
6. Still have original remote? Yes
7. Checked the file section? Yes
8. Checked Pronto file section (at R/C)? Yes
9. Partially working setup code? N/A
10. Learning remote question? N/A
11. Have you tried the JP1 Lookup Tool? yes
12. If you have a OARUSB04G, URC-6440 (or similar) remote, have you tried simpleset.com? N/A
I'm guessing there isn't one, but has anyone found a discrete "off" command for this BDP? I did a search and found a discrete on that works, and I've got my power macro set to turn this on and then wait 12 seconds and hit power toggle. A discrete off would be much neater however. thanks! Will post upgrade later when finished, I am still verifying everything because I used a Sharp DVD player for a template and had to learn half the commands as they were same protocol but different OBCs. |
|
Back to top |
|
|
The Robman Site Owner
Joined: 01 Aug 2003 Posts: 21271 Location: Chicago, IL |
Posted: Mon May 25, 2020 8:34 am Post subject: |
|
|
Could you post the upgrade now, and then update it later if needed? Otherwise anyone trying to help you is shooting blind not knowing what code this unit uses. _________________ Rob
www.hifi-remote.com
Please don't PM me with remote questions, post them in the forums so all the experts can help! |
|
Back to top |
|
|
n8nagel
Joined: 03 Jun 2018 Posts: 185
|
Posted: Wed May 27, 2020 8:40 am Post subject: |
|
|
The Robman wrote: | Could you post the upgrade now, and then update it later if needed? Otherwise anyone trying to help you is shooting blind not knowing what code this unit uses. |
I have actually as I feel it's pretty good as is.
http://www.hifi-remote.com/forums/dload.php?action=file&file_id=25938
I started with a file someone had posted for a HP-20U; I assumed that they would be substantially similar, but I was wrong - had to learn a lot of buttons.
Before I call this exercise done I think I will learn every button off the original remote and check them off on a spreadsheet to make sure I have all the OBCs correct. Right now I'm waiting on an original remote for the receiver to show up as we had none at all, so the only codes programmed in were from a downloaded upgrade that I found that stated that it only had basic functions. |
|
Back to top |
|
|
MaskedMan Tivo Expert
Joined: 10 Feb 2004 Posts: 1018 Location: Boone, IA |
Posted: Wed May 27, 2020 3:14 pm Post subject: |
|
|
Could your discrete ON command be just a Play command? _________________ Edmund |
|
Back to top |
|
|
The Robman Site Owner
Joined: 01 Aug 2003 Posts: 21271 Location: Chicago, IL |
Posted: Wed May 27, 2020 6:54 pm Post subject: |
|
|
So, this device uses the Sharp DVD protocol with device codes 8, 48. I spotted one upgrade file that uses the same codes here, and while it doesn't include any discrete codes, it does include a few functions that you don't have (see below). I notice that your POWER ON OBC is 248, so have you tried 247 or 249 as a POWER OFF code?
OBC - Function
023 - Backlight
024 - InputNext
044 - Slow
057 - Angle
113 - 11
114 - 12
131 - Record
138 - Skip Foward
139 - Zoom
141 - CH+
142 - CH-
152 - C-Code
157 - Info
159 - Data
160 - TV/Radio
164 - TV-Analog
167 - exit
169 - Number Input
178 - DVD
186 - TV-Digital
187 - BS-Digital
188 - CS-Digital
190 - Chapter Mark
192 - Record Stop
193 - Record Pause
214 - Guide
219 - BD _________________ Rob
www.hifi-remote.com
Please don't PM me with remote questions, post them in the forums so all the experts can help! |
|
Back to top |
|
|
n8nagel
Joined: 03 Jun 2018 Posts: 185
|
Posted: Thu May 28, 2020 6:52 am Post subject: |
|
|
I'm taking a break from working on this because I'm waiting on a factory remote for the receiver to finish that upgrade (right now it's hard to use the tuner because it only does preset up/down and direct frequency entry) once I receive that remote I will be fine tuning all of the devices in this setup as all required some work from me.
Rob, thanks for those codes, I will see if any of the "new" ones do anything on this device. |
|
Back to top |
|
|
n8nagel
Joined: 03 Jun 2018 Posts: 185
|
Posted: Fri May 29, 2020 12:58 pm Post subject: |
|
|
Looks like I will have remote later today so I'll play with it this weekend.
Housemate just thanked me for getting as far as I did with the programming. Apparently he was casting to the system with his Chromecast the other day while I was at work. (JP1 to the rescue?) |
|
Back to top |
|
|
n8nagel
Joined: 03 Jun 2018 Posts: 185
|
Posted: Sun May 31, 2020 11:21 am Post subject: |
|
|
Just reuploaded.
http://www.hifi-remote.com/forums/dload.php?action=file&file_id=25938
I just brute forced it and found a very few buttons that weren't on the original remote, INCLUDING A DISCRETE POWER OFF.
There's an hour of my life I'll never get back, but hey, this is one step closer to a properly functioning system.
Now we have documentation that Logitech doesn't even have, as my Harmony does not show discrete power commands for that player.
Here's my notes from literally just brute force testing every OBC that wasn't already assigned to a function.
Added functions not on original remote:
Angle OBC 57
Display On/Off OBC 117
Power Off OBC 146
Error Rate OBC 241
Power On OBC 248
Other OBCs that seem to do something that I didn't fully test or include:
131: causes message "operate after stopping playback" but when stopped doesn't seem to do anything
138: skips a few seconds? forward?
164: goes to DVD menu
176: skips a few seconds back? |
|
Back to top |
|
|
|