JP1 Remotes

Fasteddy1320 · Joined: 13 Dec 2019 Posts: 1

I have a bell 6141 hd satelite box and am desperately looking for the 3 digit code for a ONE FOR ALL URC-2099 universal remote.
775 does not work.
Or same bell hd box 4 digit code for a My One Remote ONB13av004ca Universal remote
Any help would be greatly appreciated.
Thank You...
Mike

mdavej · Expert Joined: 08 Oct 2003 Posts: 4502

Here's the manual with all the codes. Dish codes should work. But that old remote doesn't have any Dish codes. So I think you're out of luck with that one.
http://files.remotecentral.com/download/490/urc2005-manual.zip.html

The Dish code for your ONB13 remote is apparently 0073:
https://manuals.plus/onn/onn-universal-remote-manual-codes-onb13av004

MaskedMan · Posted: Fri Dec 13, 2019 2:04 pm Post subject:

For any preprogrammed code to work the bell receiver would have to accept IR codes and be set to unit code #1, so is it?
_________________
Edmund

johnherndon · Joined: 11 Mar 2024 Posts: 1

I'm in urgent need of the three-digit code for my Bell 6141 HD satellite box to pair with a ONE FOR ALL URC-2099 universal remote; unfortunately, 775 isn't working. Alternatively, I could use the four-digit code for the same Bell HD box to sync with a My One Remote ONB13av004ca Universal remote. I'd greatly appreciate any assistance.

3FG · Expert Joined: 19 May 2009 Posts: 3368

Neary duplicate post from 2019, so likely spam.
http://www.hifi-remote.com/forums/viewtopic.php?p=138052

The Robman · Posted: Sat May 04, 2024 9:52 am Post subject:

Good catch Dave, my spam-radar was going off on this one too. Now with AI, they can quote an old post but change the actual wording.

And the OP from 2019 never came back to the forum looking for answers either.
_________________
Rob
www.hifi-remote.com
Please don't PM me with remote questions, post them in the forums so all the experts can help!

Lurker · Joined: 11 Apr 2004 Posts: 124

Greetings, fellow tech enthusiasts!

I find myself in a predicament regarding my home entertainment setup. I have a Bell 6141 HD satellite receiver, and I'm on a quest to unlock its full potential by pairing it with a universal remote control. Specifically, I need the elusive code sequence to program a ONE FOR ALL URC-2099 remote. The combination 775 has failed to yield the desired results.

If that particular remote proves too stubborn, I'm open to alternative solutions. Perhaps someone could enlighten me with the four-digit code required to synchronize a My One Remote ONB13av004ca Universal remote with my Bell HD satellite box.

Your expertise in this matter would be an invaluable aid, and I would be forever grateful for any insights you can provide.

Sincerely,
Clever JP1 Forum Spammer

Lurker · Joined: 11 Apr 2004 Posts: 124

Yo whats good fam? I gots dis Bell 6141 HD box n I cant get da universal remote 2 werk wit it. Tryd a ONE 4 ALL URC-2099 but dat 775 code aint doin shiz.

Any1 no da 3 diGit code 2 make dat remote tlk 2 my Bell box?? Or mebbe da 4 diGit 1 4 a My One Remote ONB13av004ca? Dat wood be clutchh af.

Hit me up if u got da goodz, wood rly halp a bruddah out n shiz.

Spam-Dawg

The Robman · Posted: Sat May 04, 2024 12:54 pm Post subject:

Lurker is fine tuning his AI-spambot
_________________
Rob
www.hifi-remote.com
Please don't PM me with remote questions, post them in the forums so all the experts can help!

Lurker · Joined: 11 Apr 2004 Posts: 124

Just having a little fun. I see my 20-year anniversary of joining this forum is next week. Surprised

The Robman · Posted: Sun May 05, 2024 9:10 am Post subject:

You missed it, it was last month, you should have had a party.
_________________
Rob
www.hifi-remote.com
Please don't PM me with remote questions, post them in the forums so all the experts can help!