View previous topic :: View next topic |
Author |
Message |
jenom
Joined: 29 Oct 2019 Posts: 28
|
Posted: Tue Oct 29, 2019 1:57 pm Post subject: Atlas URC-1056B03 interface ? |
|
|
I have a Atlas URC-1056B03 remote control.
In a chart marked as JP1.x
I am experienced to build simple interface circuits, have tools, parts, cables, etc...
Did lots of reading on this forum, the more I read, more confusing things got...
Just want to put together the most simplest connection , looks like PARALLEL is the easiest way to go.....have everything for it !
Question-1: Is the PARALLEL interface works for JP1.x ?
Question-2: What software program to use ? Remote Master, or other ?
Thanks! |
|
Back to top |
|
|
jenom
Joined: 29 Oct 2019 Posts: 28
|
Posted: Tue Oct 29, 2019 2:50 pm Post subject: Atlas URC-1056B03 interface ? |
|
|
After continued with more reading....
Looks like a PARALLEL interface is only for older EEPROM remotes, and I have a FLASH remote
However, what JP1.x exactly means ? x=anything ? 1,2,3,4 ?
Downloaded & installed the latest Remote Master program
In the RDF folder ATLAS 1056B03 is listed, there is even an "extender" for it.
So I start to put together a 1 IC+ few resistors + diodes serial interface board... |
|
Back to top |
|
|
The Robman Site Owner
Joined: 01 Aug 2003 Posts: 21254 Location: Chicago, IL |
|
Back to top |
|
|
jenom
Joined: 29 Oct 2019 Posts: 28
|
Posted: Tue Oct 29, 2019 5:02 pm Post subject: |
|
|
thanks for the info
Although it is very cheap, ETA for E-Bay item is a long time....Jan 7 |
|
Back to top |
|
|
mdavej Expert
Joined: 08 Oct 2003 Posts: 4504
|
|
Back to top |
|
|
The Robman Site Owner
Joined: 01 Aug 2003 Posts: 21254 Location: Chicago, IL |
Posted: Tue Oct 29, 2019 5:36 pm Post subject: |
|
|
Yes, because it's cheap, and I bought one of them myself and can confirm that it works. All of the ebay cables have the wrong connector. _________________ Rob
www.hifi-remote.com
Please don't PM me with remote questions, post them in the forums so all the experts can help! |
|
Back to top |
|
|
jenom
Joined: 29 Oct 2019 Posts: 28
|
Posted: Tue Oct 29, 2019 6:05 pm Post subject: |
|
|
I already have a RS232 TO TTL board with MAX232 chip
9 pin serial connector to PC, and pins with wires to device
Would that work ? |
|
Back to top |
|
|
mdavej Expert
Joined: 08 Oct 2003 Posts: 4504
|
Posted: Tue Oct 29, 2019 6:35 pm Post subject: |
|
|
The Robman wrote: | Yes, because it's cheap, and I bought one of them myself and can confirm that it works. All of the ebay cables have the wrong connector. | Yeah but at least the individual pin version is usable out of the box. |
|
Back to top |
|
|
underquark Expert
Joined: 20 Jun 2005 Posts: 874 Location: UK |
Posted: Tue Oct 29, 2019 7:42 pm Post subject: |
|
|
Regarding cables with the “wrong connector”, you can buy a cheap cable with 6-in-a-row connector and cut and glue it to make your own JP1.2 connector:
See here. |
|
Back to top |
|
|
jenom
Joined: 29 Oct 2019 Posts: 28
|
Posted: Thu Oct 31, 2019 7:46 am Post subject: Converter Serial Cable module |
|
|
would this 4 wire cable
PL2303TA USB TTL to RS232 Converter Serial Cable module for win 8 XP VISTA 7 8.1
work ?
Thanks !
https://www.ebay.com/itm/141976888959 |
|
Back to top |
|
|
The Robman Site Owner
Joined: 01 Aug 2003 Posts: 21254 Location: Chicago, IL |
|
Back to top |
|
|
jenom
Joined: 29 Oct 2019 Posts: 28
|
Posted: Thu Oct 31, 2019 11:13 am Post subject: |
|
|
I do not have a patience to wait many weeks for a $3 USB cable to arrive from China.....and I do not want to spend more money on this project either.
Then dealing with with fake/not fake and locked/not locked drivers , etc...
Hardware Solution:
I have all the components to put together quickly an IC version of serial interface on the weekend.
74HC266 + 5 resistor+1 capacitor+DB 9 serial connector....simple enough !
What is the serial communication protocol used by JP1.x interfaces ?
(speed, parity,stop,etc...)
Thanks! |
|
Back to top |
|
|
The Robman Site Owner
Joined: 01 Aug 2003 Posts: 21254 Location: Chicago, IL |
Posted: Thu Oct 31, 2019 1:08 pm Post subject: |
|
|
If you're not willing to wait for a cable from China, why did you ask if the ebay listing that you found would work, as that's also coming from China and could take as long as Jan 3rd to get here, according to the listing. The only difference that I see is that that cable costs about $1.50 whereas the one that I listed is about $3.50.
If you know how to build a cable, have at it. _________________ Rob
www.hifi-remote.com
Please don't PM me with remote questions, post them in the forums so all the experts can help! |
|
Back to top |
|
|
jenom
Joined: 29 Oct 2019 Posts: 28
|
Posted: Fri Nov 01, 2019 7:52 am Post subject: |
|
|
the less than 1/2 price cable was tempting to wait for.....although from my experience ,sometimes the ordered and paid Ebay item never arrives
I prefer to use Aliexpress, where the seller always need to provide tracking number, and only gets paid when buyer confirms item arrival.
Now back to my last question, does anybody knows and willing to share, what are the serial protocol setting of JP1.x interfaces ? (baud rate, start bit, stop bit, parity, etc...
Thanks! |
|
Back to top |
|
|
The Robman Site Owner
Joined: 01 Aug 2003 Posts: 21254 Location: Chicago, IL |
Posted: Fri Nov 01, 2019 8:30 am Post subject: |
|
|
We've all been able to buy cheap cables from China for so long, I don't know if anyone remembers those details. But, given that we're using "off the shelf" FTDI cables, can't you just look up the spec on them and follow that? _________________ Rob
www.hifi-remote.com
Please don't PM me with remote questions, post them in the forums so all the experts can help! |
|
Back to top |
|
|
|