JP1 Remotes Forum Index JP1 Remotes


FAQFAQ SearchSearch 7 days of topics7 Days MemberlistMemberlist UsergroupsUsergroups RegisterRegister
ProfileProfile Log in to check your private messagesLog in to check your private messages Log inLog in

Need help with newer Onkyo codes

 
Post new topic   Reply to topic    JP1 Remotes Forum Index -> JP1 - General Forum
View previous topic :: View next topic  
Author Message
110220Volts



Joined: 17 Mar 2007
Posts: 125
Location: Trumbull, Connecticut

PostPosted: Wed Sep 18, 2019 10:22 am    Post subject: Need help with newer Onkyo codes Reply with quote

I am trying to create a quick upgrade file for my Onkyo TX-NR676 for a Charter URC-1060 remote and I don't understand how the newer codes work

I only need a few functions
Volume Up Down, Mute, Power toggle, Bluetooth, PC the only one that does not work is Bluetooth I don't know what OBC2 means.

I used a Nevo C2 and a Logitech Harmony 880 to get the codes for Bluetooth and PC

Code:
Bluetooth is Size 42 Freq. 37915 NEC1-f16 device 210 Sub device 30 OBC 80 Hex 70 OBC2=14


Thanks
Back to top
View user's profile Send private message Visit poster's website AIM Address
The Robman
Site Owner


Joined: 01 Aug 2003
Posts: 19077
Location: Chicago, IL

PostPosted: Wed Sep 18, 2019 1:42 pm    Post subject: Reply with quote

Could you post the RMDU file for what you have so far, and an RMIR file for any learned signals?

Regarding your OBC2 question, the NEC1-f16 protocol uses 2 OBCs and there are 2 OBC clumns for it in RM.
_________________
Rob
www.hifi-remote.com
Please don't PM me with remote questions, post them in the forums so all the experts can help!
Back to top
View user's profile Send private message Visit poster's website
110220Volts



Joined: 17 Mar 2007
Posts: 125
Location: Trumbull, Connecticut

PostPosted: Wed Sep 18, 2019 4:12 pm    Post subject: Reply with quote

OK the files are here
Back to top
View user's profile Send private message Visit poster's website AIM Address
StephenR0



Joined: 12 Feb 2007
Posts: 87
Location: Iowa, US

PostPosted: Wed Sep 18, 2019 7:23 pm    Post subject: Reply with quote

This might help you. I've put a zip with two spreadsheets here.

http://www.hifi-remote.com/forums/dload.php?action=file&file_id=25667

One of the spreadsheets is a recent spreadsheet with all of the receiver models including the TX-NR676. The other spreadsheet is a modified version that takes just the TX-RZ820 receiver and calculates device, subdevice, and obc codes for the parts I was interested in. Mostly, I was interested in the main, net, and BD (via RIHD) tabs. The last one is for sending CEC commands to the input device. I haven't looked closely, but the codes you are interested in may be the same as the TX-RZ820. If not, you should be able to create a similar spreadsheet for your receiver. Hopefully, this will get you what you need.
Back to top
View user's profile Send private message
The Robman
Site Owner


Joined: 01 Aug 2003
Posts: 19077
Location: Chicago, IL

PostPosted: Thu Sep 19, 2019 4:08 pm    Post subject: Reply with quote

110220Volts wrote:
OK the files are here

That makes it clearer, you are getting regular NEC signals for all the other buttons and you're just seeing NEC-f16 for the one "BT" button.

In order to make one upgrade that contains all of the buttons, you would need to switch to the NEC-f16 executor. Basically, it lets you define each field (ie, dev, sub-device, OBC and OBC2) without any pre-defined rules. For normal NEC signals, the OBC2 position is just the complement of the OBC, so the user doesn't need to enter it.

So, if you use NEC-f16 for all the buttons, you would need to set OBC2 = 255 - OBC (ie, that is how you get the complement).

I have created an upgrade, based on the one that was in your Nevo file, and have added the BT button. I have also included a spreadsheet that will calculate the OBC2 values for you.

http://www.hifi-remote.com/forums/dload.php?action=file&file_id=25668
_________________
Rob
www.hifi-remote.com
Please don't PM me with remote questions, post them in the forums so all the experts can help!


Last edited by The Robman on Thu Sep 19, 2019 9:11 pm; edited 1 time in total
Back to top
View user's profile Send private message Visit poster's website
110220Volts



Joined: 17 Mar 2007
Posts: 125
Location: Trumbull, Connecticut

PostPosted: Thu Sep 19, 2019 5:49 pm    Post subject: Reply with quote

The Robman wrote:
110220Volts wrote:
OK the files are here

That makes it clearer, you are getting regular NEC signals for all the other buttons and you're just seeing NEC-f16 for the one "BT" button.

In order to make one upgrade that contains all of the buttons, you would need to switch to the NEC-f16 executor. Basically, it lets you define each field (ie, dev, sub-device, OBC and OBC2) without any pre-defined rules. For normal NEC signals, the OBC2 position is just the complement of the OBC, so the user doesn't need to enter it.

So, if you use NEC-f16 for all the buttons, you would need to set OBC2 = 255 - OBC (ie, that is how you get the complement).

I have created an upgrade, based on the one that was in your Nevo file, and have added the BT button. I have also included a spreadsheet that will calculate the OBC2 values for you.

http://www.hifi-remote.com/forums/dload.php?action=file&file_id=25668


OK Thank You I figured it out now. I got the buttons I wanted and they all work

PS: I think You posted the wrong link
Back to top
View user's profile Send private message Visit poster's website AIM Address
The Robman
Site Owner


Joined: 01 Aug 2003
Posts: 19077
Location: Chicago, IL

PostPosted: Thu Sep 19, 2019 9:12 pm    Post subject: Reply with quote

110220Volts wrote:
PS: I think You posted the wrong link

Thanks, I fixed it.
_________________
Rob
www.hifi-remote.com
Please don't PM me with remote questions, post them in the forums so all the experts can help!
Back to top
View user's profile Send private message Visit poster's website
Display posts from previous:   
Post new topic   Reply to topic       JP1 Remotes Forum Index -> JP1 - General Forum All times are GMT - 5 Hours
Page 1 of 1

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum


 

Powered by phpBB © 2001, 2005 phpBB Group
Get Smart! the band's official homepage Rockabilly Central