|
JP1 Remotes
|
View previous topic :: View next topic |
Author |
Message |
Ed
Joined: 21 Sep 2003 Posts: 262 Location: Ft. Worth, TX |
Posted: Wed Dec 19, 2018 8:43 pm Post subject: NEC 2DEV Combo (01 1A) is not compatible with OARUSB04G |
|
|
Hi all,
I posted my RMIR file here: http://www.hifi-remote.com/forums/dload.php?action=file&file_id=25481
I'm trying to migrate the setup I have running on my RCRP05B to my OARUSB04G, while learning how to use the OAR extender 1.04. When I added an upgrade for my AV receiver I got the following message from RMIR:
Quote: | The selected protocol "NEC 2DEV Combo" (01 1A) is not compatible with the selected remote. This upgrade will NOT function correctly. Please choose a different protocol. |
Moreover, when I selected the "Devices" tab and tried to edit that device upgrade, the following message appeared:
Quote: | Protocol ID conflicts with a built-in protocol. To use both this and the built-in protocol in device upgrades, this one needs to be given an Alternate PID. |
I suspect these issues are related, but I don't know what to do. Neither of these messages appear in RMIR when I apply the exact same upgrade to my RCRP05B.
Thanks for any help. |
|
Back to top |
|
|
vickyg2003 Site Admin
Joined: 20 Mar 2004 Posts: 7073 Location: Florida |
Posted: Thu Dec 20, 2018 6:21 am Post subject: |
|
|
Ed, this can be a common problem. The Nec 2Dev Combo is an older version a Nec Combo. The OARUSB04G is a newer remote and will have a newer-better Nec Combo protocol version.
When this happens to me I open two sessions of RemoteMaster, one with the old Nec 2Dev Combo, and the other with the desired remote and find which Nec combo is available.
The next step is the MOST COMMON ERROR amoung JP1 users. Copy the functions over by OBC. The hex and efc codes will be recalculated for the new executor. The hex and efcs will vary from one executor to another. Same goes for the Devices, copy the device data over and let the hex recalculate.
In all the remotes that I'm familiar with, devices in the upgrade area check for protocols in the upgrade area first, then built in protocols second. While built-in devices will only use built in protocols. RMIR will make you change the PID identifier if it detects the PID already exists in the built-in area. I assume this has something to do with all the mathematical gymnastics that it does for a download, but it could be that some of the newer remotes violate that simple rule. _________________ Remember to provide feedback to let us know how the problem was solved and share your upgrades.
Tip: When creating an upgrade, always include ALL functions from the oem remote, even if you never plan on assigning them to a button. Complete function lists makes an upgrade more helpful to others.
|
|
Back to top |
|
|
Ed
Joined: 21 Sep 2003 Posts: 262 Location: Ft. Worth, TX |
Posted: Thu Dec 20, 2018 3:14 pm Post subject: |
|
|
Thanks for the quick and helpful response, Vicky.
I did as you described, only to find multiple combo protocols available with the OARUSB04G Extender 1.04. I'm well out of my comfort zone when it comes to protocols, so rather than choose the wrong one and end up scratching my head, I looked around and found another Onkyo upgrade ("SuperMaster") available that seems to have all the functions I need (and more) plus it uses the "NEC 4DEV Combo" protocol, which is available with the OARUSB04G Extender 1.04 remote, so I'm going to try to use it as I migrate my RCRP05B to the OAR remote. If you think I'm making a mistake, please let me know.
Until now, I hadn't realized that different "JP1" remotes supported different protocols, and that the same upgrade might function on one remote but not another. Now I do! |
|
Back to top |
|
|
|
|
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum
|
Powered by phpBB © 2001, 2005 phpBB Group
|