|
JP1 Remotes
|
View previous topic :: View next topic |
Author |
Message |
alanrichey Expert
Joined: 24 Mar 2008 Posts: 3529 Location: UK/USA |
Posted: Sat Mar 05, 2016 8:28 am Post subject: Sky Q Box (RC6-6-28) |
|
|
Hi all
In the UK Sky have just released a new device called the Q Box. Not surprisingly there is a clamour for a Slingbox remote. One user kindly lent me a remote so I could build a BIN file. Unfortunately Sky have created a new protocol (Do they do this just out of spite ? It seems so pointless).
IR Scope decodes it as RC6-6-28 Device 0.2074, which is not in our list as far as I know ? Now this is very close to the normal Sky Box which uses RC6-6-20n Device 5.12, with M=6, but just far enough away not to work.
And just to complicate matters, the Volume controls and the Input function decode to NEC1 Device 64, and that actually operates my Sky box (annoyed the wife as I Muted it while testing). So I assume that NEC1 64 is very similar to RC6-6-20n ?
I've attached a full learn at http://www.hifi-remote.com/forums/dload.php?action=file&file_id=13967, would it be possible to adapt one of the existing RC6 protocols to fit ?
Thanks
Al |
|
Back to top |
|
|
3FG Expert
Joined: 19 May 2009 Posts: 3368
|
Posted: Sat Mar 05, 2016 10:24 am Post subject: |
|
|
Al,
Did you upload the correct file? It seems to contain just two of the RC6-6-28 signals (Power and 0) and a NEC1 signal + ditttos, also labeled Power.
We can try to make an executor on only that info, but it's just a guess as to what bits should go in fixed data versus the bits which may be varying among the commands. |
|
Back to top |
|
|
alanrichey Expert
Joined: 24 Mar 2008 Posts: 3529 Location: UK/USA |
Posted: Sat Mar 05, 2016 10:46 am Post subject: |
|
|
Something odd going on. I definitely used the Save All option in IR Scope, but the file from the upload only has the few reads in it as you describe. What is even more off is that the file on my computer that I uploaded has twice the reads, but is still garbage. I've tried again, and to keep things simple, the file (same URL) now has just the Power, numbers and Channel buttons. It seems to download and install correctly.
If you need any more buttons let me know.
Thanks
Al |
|
Back to top |
|
|
The Robman Site Owner
Joined: 01 Aug 2003 Posts: 21244 Location: Chicago, IL |
Posted: Sat Mar 05, 2016 6:08 pm Post subject: |
|
|
Just FYI, I tried to make a modified version of the ReplayTV (simple) protocol to work for this, but I just can't get it to work. I've spent all day on it, so I give up. Hopefully someone else will jump in and pick it up. _________________ Rob
www.hifi-remote.com
Please don't PM me with remote questions, post them in the forums so all the experts can help! |
|
Back to top |
|
|
vickyg2003 Site Admin
Joined: 20 Mar 2004 Posts: 7073 Location: Florida |
Posted: Sat Mar 05, 2016 8:02 pm Post subject: |
|
|
The Robman wrote: | Just FYI, I tried to make a modified version of the ReplayTV (simple) protocol to work for this, but I just can't get it to work. I've spent all day on it, so I give up. Hopefully someone else will jump in and pick it up. |
Rob, I spent a huge amount of time on that last Epson we did and there seems to be something wrong with my PB. When I looked at the compiled code a few commands were missing bytes. I think something is wrong with my PB file, or my Excel. You might want to eyeball your assembly code to make sure this same kind of thing isn't happening on you PC.
Now as to this, is this another quad? _________________ Remember to provide feedback to let us know how the problem was solved and share your upgrades.
Tip: When creating an upgrade, always include ALL functions from the oem remote, even if you never plan on assigning them to a button. Complete function lists makes an upgrade more helpful to others.
|
|
Back to top |
|
|
The Robman Site Owner
Joined: 01 Aug 2003 Posts: 21244 Location: Chicago, IL |
Posted: Sat Mar 05, 2016 8:16 pm Post subject: |
|
|
No, this is just a regular RC6 bi-phase signal, it's just like the ReplayTV signal only 4 bits longer. If I had tried to do it using the UEI code, I probably could have got it working, but I tried to use John Fine's fancy "simple" version where you do the bit doubling outside of the code but I couldn't get it to work. As far as the assembler goes, it's practically the same, you just have to add 1 fixed byte and adjust the registers used (ie, R0A becomes R0B, and R09 becomes R0A) _________________ Rob
www.hifi-remote.com
Please don't PM me with remote questions, post them in the forums so all the experts can help! |
|
Back to top |
|
|
vickyg2003 Site Admin
Joined: 20 Mar 2004 Posts: 7073 Location: Florida |
Posted: Sat Mar 05, 2016 11:44 pm Post subject: |
|
|
The Robman wrote: | No, this is just a regular RC6 bi-phase signal, it's just like the ReplayTV signal only 4 bits longer. |
Hmm, I had only looked at the first signal, I think its the power button, in that ICT and I saw the 4th bump on the graph had a long Low before and a long low after. I didn't think a biphase could do that. So I went and looked at the IRP for the Replay
Replay
IRP notation: {36k,444,msb}<-1,1|1,-1>(6,-2,1:1,6:3,<-2,2|2,-2>(T:1),D:8,S:8,F:8,-???)+
I guessing that <-2,2|2,-2> is what I'm seeing. Not quite sure what that means in this notation, but I definitely something funky going on after that 4th bit in the few signals that I looked at.
I haven't looked at the protocol, more than to see that there are 6 or 7 fixed bytes of data, depending on which version you look at.
.
It also looks like there are 9 pieces of of 450 ms timings, before you get to the device, subdevice and functions. Can I assume they are painting the picture with 1 for 450ms of on time, and 0 for 450ms of off time? [/b] _________________ Remember to provide feedback to let us know how the problem was solved and share your upgrades.
Tip: When creating an upgrade, always include ALL functions from the oem remote, even if you never plan on assigning them to a button. Complete function lists makes an upgrade more helpful to others.
|
|
Back to top |
|
|
vickyg2003 Site Admin
Joined: 20 Mar 2004 Posts: 7073 Location: Florida |
Posted: Sun Mar 06, 2016 6:56 am Post subject: |
|
|
Alan, as you may have guessed by now, this protocol is going to be painful to construct. On that note, could you make sure we have a complete set of commands before we delve into this any further. I'd hate to see us make an assumption about the signal, only to find out that when we get the complete set that we need more command bits. |
|
Back to top |
|
|
alanrichey Expert
Joined: 24 Mar 2008 Posts: 3529 Location: UK/USA |
Posted: Sun Mar 06, 2016 7:26 am Post subject: |
|
|
Yes, of course. File uploaded so that it now contains all the buttons n the remote.
Sorry to be such a pain. |
|
Back to top |
|
|
The Robman Site Owner
Joined: 01 Aug 2003 Posts: 21244 Location: Chicago, IL |
Posted: Sun Mar 06, 2016 9:40 am Post subject: |
|
|
Vicky, the RC6 clan of bi-phase signals break the rules, which is why we can't just program them as simple bi-phase, and that rule breaking is the double wide pair that you see.
Here's the binary for the 13 buttons, and just for comparison, also the binary for the 4 ReplayTV signals that are included in the FromRob.ir file that ships with IR.exe: Code: | # Dev Key Freq Raw Timing Data
1 TV Power 35874 Repeat: +2664 -888; 1110 -888 +888; 00000000 10000001 1010 00001100 -116328
2 TV 0 35874 Repeat: +2664 -888; 1110 -888 +888; 00000000 10000001 1010 00000000 -116328
3 TV 1 35874 Repeat: +2664 -888; 1110 -888 +888; 00000000 10000001 1010 00000001 -116328
4 TV 2 36036 Repeat: +2664 -888; 1110 -888 +888; 00000000 10000001 1010 00000010 -116328
5 TV 3 35714 Repeat: +2664 -888; 1110 -888 +888; 00000000 10000001 1010 00000011 -116328
6 TV 4 36036 Repeat: +2664 -888; 1110 -888 +888; 00000000 10000001 1010 00000100 -116328
7 TV 5 36199 Repeat: +2664 -888; 1110 -888 +888; 00000000 10000001 1010 00000101 -116328
8 TV 6 36036 Repeat: +2664 -888; 1110 -888 +888; 00000000 10000001 1010 00000110 -116328
9 TV 7 36036 Repeat: +2664 -888; 1110 -888 +888; 00000000 10000001 1010 00000111 -116328
10 TV 8 36036 Repeat: +2664 -888; 1110 -888 +888; 00000000 10000001 1010 00001000 -116328
11 TV 9 35874 Repeat: +2664 -888; 1110 -888 +888; 00000000 10000001 1010 00001001 -116328
12 TV CH+ 36199 Repeat: +2664 -888; 1110 -888 +888; 00000000 10000001 1010 00100000 -116328
13 TV CH- 35874 Repeat: +2664 -888; 1110 -888 +888; 00000000 10000001 1010 00100001 -116328
14 PVR RWD 36036 Repeat: +2664 -888; 1110 -888 +888; 00000001 00000001 00001101 -108780
15 PVR REC 36036 Repeat: +2664 -888; 1110 -888 +888; 00000001 00000001 00001110 -108780
16 PVR FWD 36036 Repeat: +2664 -888; 1110 -888 +888; 00000001 00000010 00001101 -108780
17 PVR Pause 36036 Repeat: +2664 -888; 1110 -888 +888; 00000001 00000010 00001110 -108780 |
If you want to look at these signals in IR.exe, here's the file that I created from the ICT file:
http://www.hifi-remote.com/forums/dload.php?action=file&file_id=13968
I think my executor is ok, I think the problem is getting the right data to feed into it, but I'm not positive. The quirky thing with John's exec is that it doesn't automatically form pairs, you have to feed the right data into it in order to get pairs, where a '1' is the +444 half of a pair, and a '0' is the -444 half of a pair, so if you don't get that right, your signal won't have pairs and the learning remote will crap out. _________________ Rob
www.hifi-remote.com
Please don't PM me with remote questions, post them in the forums so all the experts can help! |
|
Back to top |
|
|
The Robman Site Owner
Joined: 01 Aug 2003 Posts: 21244 Location: Chicago, IL |
Posted: Sun Mar 06, 2016 10:50 am Post subject: |
|
|
And here's as far as I got, in case anyone can find the mistake and fix it...
Code: | Upgrade protocol 0 = 01 FF (S3C8+) RC6-6-28 (PB v4.02)
47 93 81 8B 12 87 05 08 04 00 DE 00 00 00 00 00
CA E3 83 05 35 01 A8 0C 0A 02 11 10 0A 10 0B 10
C1 1E 10 0A 0A F3 19 0B 8D 01 46
End
# Translator uses numeric parms index,bits,msbOffset,lsbOffset
# index selects (0 based) an item from DevParms (default=0)
# bits is the number of bits to use (default = 8)
# msbOffset is an msb bit position within fixed data (default=0)
# lsbOffset is an lsb bit position within the DevParms item (default=0)
# adjust is a value to add to the extracted data, default=0
# lsb and comp are keyword parameters (non-positional)
[RC6-6-28]
PID=01 FF
DevParms=Device Code=0,Sub device=0
DeviceTranslator=Translator(0,1,12,7) Translator(0,1,13,7,comp) \
Translator(0,1,14,6) Translator(0,1,15,6,comp) \
Translator(0,1,16,5) Translator(0,1,17,5,comp) \
Translator(0,1,18,4) Translator(0,1,19,4,comp) \
Translator(0,1,20,3) Translator(0,1,21,3,comp) \
Translator(0,1,22,2) Translator(0,1,23,2,comp) \
Translator(0,1,24,1) Translator(0,1,25,1,comp) \
Translator(0,1,26,0) Translator(0,1,27,0,comp) \
Translator(1,1,28,11) Translator(1,1,29,11,comp) \
Translator(1,1,30,10) Translator(1,1,31,10,comp) \
Translator(1,1,32,9) Translator(1,1,33,9,comp) \
Translator(1,1,34,8) Translator(1,1,35,8,comp) \
Translator(1,1,36,7) Translator(1,1,37,7,comp) \
Translator(1,1,38,6) Translator(1,1,39,6,comp) \
Translator(1,1,40,5) Translator(1,1,41,5,comp) \
Translator(1,1,42,4) Translator(1,1,43,4,comp) \
Translator(1,1,44,3) Translator(1,1,45,3,comp) \
Translator(1,1,46,2) Translator(1,1,47,2,comp) \
Translator(1,1,48,1) Translator(1,1,49,1,comp) \
Translator(1,1,50,0) Translator(1,1,51,0,comp)
FixedData=A9 35 55 55 55 55 55 00
CmdParms=OBC=0
CmdTranslator=Translator()
Code.S3C80=47 93 81 8B 12 87 05 08 04 00 DE 00 00 00 00 00 CA E3 83 05 35 01 A8 0C 0A 02 11 10 0A 10 0B 10 C1 1E 10 0A 0A F3 19 0B 8D 01 46 |
Just FYI, the leading 4 bits (ie, 1110) and the double wide pair are created using the first 3 nibbles of the fixed data (ie, A93), the device translator above picks up after the 12th bit. Each byte of fixed data translates into 4 bits of the final binary (ie, the bit doubling is done in advance), but the variable byte is bit doubled in the assembler.
My executor is generating something like this:
+2683 -878 +29422 -116348
which is the leadin and leadout, with just a long ON time in between, so the zeroes are not registering. _________________ Rob
www.hifi-remote.com
Please don't PM me with remote questions, post them in the forums so all the experts can help!
Last edited by The Robman on Sun Mar 06, 2016 11:10 am; edited 1 time in total |
|
Back to top |
|
|
alanrichey Expert
Joined: 24 Mar 2008 Posts: 3529 Location: UK/USA |
Posted: Sun Mar 06, 2016 10:59 am Post subject: |
|
|
Is it worth giving it a try yet ? |
|
Back to top |
|
|
vickyg2003 Site Admin
Joined: 20 Mar 2004 Posts: 7073 Location: Florida |
Posted: Sun Mar 06, 2016 11:02 am Post subject: |
|
|
It certainly looks like you could do this without assembler if you made it 6 device 2 command, but with a 32 commands for the equipment, that is 32 bytes of extra device data. On the other hand if you assume the commands are binary biphase, then you could save 32 bytes of data by changing to a 7 dev, 1 command command, and just write some code to change a 1 into a 10, and a 0 into a 01 or vice versa. I'm sure you could do that in less than 31 bytes of code. Just wish my binary skills were better. _________________ Remember to provide feedback to let us know how the problem was solved and share your upgrades.
Tip: When creating an upgrade, always include ALL functions from the oem remote, even if you never plan on assigning them to a button. Complete function lists makes an upgrade more helpful to others.
Last edited by vickyg2003 on Sun Mar 06, 2016 11:48 am; edited 1 time in total |
|
Back to top |
|
|
The Robman Site Owner
Joined: 01 Aug 2003 Posts: 21244 Location: Chicago, IL |
Posted: Sun Mar 06, 2016 11:22 am Post subject: |
|
|
alanrichey wrote: | Is it worth giving it a try yet ? |
No _________________ Rob
www.hifi-remote.com
Please don't PM me with remote questions, post them in the forums so all the experts can help! |
|
Back to top |
|
|
The Robman Site Owner
Joined: 01 Aug 2003 Posts: 21244 Location: Chicago, IL |
Posted: Sun Mar 06, 2016 11:28 am Post subject: |
|
|
vickyg2003 wrote: | It certainly looks like you could do this without assembler if you made it 5 device 3 command, but with a 32 commands for the equipment, that is 32 bytes of extra device data. On the other hand if you assume the commands are binary biphase, then you could save 32 bytes of data by changing to a 4 dev, 2 comand command, and just write some code to change a 1 into a 10, and a 0 into a 01 or vice versa. I'm sure you could do that in less than 31 bytes of code. Just wish my binary skills were better. |
It wouldn't be 5+3, it would be 6+3, count again.
If you want to do all the bit doubling in the assembler, look at the official ReplayTV executor because that's how they do it. If we treat the signal as a regular bi-phase signal, we'll lose the double wide bit. _________________ Rob
www.hifi-remote.com
Please don't PM me with remote questions, post them in the forums so all the experts can help! |
|
Back to top |
|
|
|
|
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum
|
Powered by phpBB © 2001, 2005 phpBB Group
|