View previous topic :: View next topic |
Author |
Message |
t4_ravenbird
Joined: 01 Jan 2014 Posts: 38
|
Posted: Sun Dec 14, 2014 1:29 pm Post subject: URC-6440 - Learn and convert to upgrade problem |
|
|
Hi
I am using an URC 6440 with extender 1.00 and RMIR and the versions as announced here ; http://www.hifi-remote.com/forums/viewtopic.php?t=15831
It is working very well so I am super-happy with it.
I have a little problem, though. Just for fun I wanted to control a fan-heating-oven and used the remote to learn the 7 buttons off of the original remote and when I operate the oven with the learned codes it works fine.
However, after using the "convert to upgrade" - button in the "learned signals" section in RMIR I get a problem. The newly created upgrade looks fine but if I upload it to the remote it does not work, oven does no longer respond.
Here is a .rmir with learn-signals and a generated .rmdu ;
http://www.hifi-remote.com/forums/dload.php?action=file&file_id=12986
http://www.hifi-remote.com/forums/dload.php?action=file&file_id=12987
Is there any tip to what could give me problems here?
I have used the learn->convert procedure successfully for other things so I dont understand what could be wrong here |
|
Back to top |
|
|
3FG Expert
Joined: 19 May 2009 Posts: 3367
|
Posted: Sun Dec 14, 2014 2:52 pm Post subject: |
|
|
In your RMDU file, locate the Parms field, and delete the 0, making it an empty field. This is a recently discovered bug in Convert To Upgrade. It happens with the NEC1/2/1x/2x PID 005A executor. We're working on it. |
|
Back to top |
|
|
t4_ravenbird
Joined: 01 Jan 2014 Posts: 38
|
Posted: Mon Dec 15, 2014 1:31 am Post subject: |
|
|
Great! Thanks a lot! |
|
Back to top |
|
|
|