View previous topic :: View next topic |
Author |
Message |
jchiso
Joined: 18 Nov 2010 Posts: 39 Location: Columbus, OH |
Posted: Fri Jun 14, 2013 7:28 pm Post subject: Create device from learned keystrokes |
|
|
Is there a document that shows how to create a device from a set of learned IR commands? I can capture the codes with a Pronto (Marantz) remote and decode using the DecodeCCF utility. |
|
Back to top |
|
|
vickyg2003 Site Admin
Joined: 20 Mar 2004 Posts: 7073 Location: Florida |
Posted: Fri Jun 14, 2013 9:50 pm Post subject: |
|
|
Our documentation covers some of the basic protocols, but some of the other executors can be a bit of a problem.
We have two software programs that can be used. RemoteMaster(RM) a java based app, or KeymapMaster a MS Excel spreadsheet.
You'll probably be using RM to create an upgrade. It is easier to use than KM
You can create an upgrade to use with RMIR or IR.
These wiki links might help
RemoteMaster wiki entries
JP1 just how easy is it
Using Remote Master to create an upgrade to use with IR
KM wiki entries
JP1 just how easy is it, KM version
Using KM to create a device upgrade
Sometimes they are pretty easy, but sometimes the executors are a bit complicated, and the data entry becomes more difficult to figure out
Three major hints though.
1) If nothing is specified, don't make any entry in a field! A zero is not a blank!!!
2) Check the MISC column for additional information on the learns.
3) If you have questions ask. |
|
Back to top |
|
|
jchiso
Joined: 18 Nov 2010 Posts: 39 Location: Columbus, OH |
Posted: Tue Jun 18, 2013 7:43 pm Post subject: |
|
|
Thanks for the links. I opted for the "learning remote" route. I guess that's a good incentive to keep an extra remote around. |
|
Back to top |
|
|
|