|
JP1 Remotes
|
View previous topic :: View next topic |
Author |
Message |
spalter3
Joined: 15 Feb 2012 Posts: 19
|
Posted: Fri Feb 24, 2012 4:39 pm Post subject: |
|
|
since i only noticed the protocols are the same after creating my protocol (see http://www.hifi-remote.com/forums/viewtopic.php?t=13887) here it is for the urc-7960: http://www.hifi-remote.com/forums/dload.php?action=file&file_id=10734
the codes for the light kit, intertechno plugs, elro and many more (lots of the really cheap ones in europe use these codes) are all the same. they just sometimes use house codes or device codes that are inaccessible from other systems (there's 16 house codes and 16 device codes).
my upgrade uses 2 byte obcs, so you only need one device upgrade even if you use several house codes. it also works without any assembler (except for the one command for minimum repeat). the predefined functions are for the elro ab601 (which is what i have), but the ofa light kit can learn them without any problems.
if you want to use this with intertechno or ab440 you need to change the obcs! first nibble is house code, second is device code, second byte is on/off. |
|
Back to top |
|
|
Barf Expert
Joined: 24 Oct 2008 Posts: 1416 Location: Munich, Germany |
Posted: Sat May 05, 2012 1:37 pm Post subject: |
|
|
Finally, what probably no-one has been waiting for, and no-one will ever need: The IRP /an IRP notation for the said protocol:
Code: |
{36.0k,388,msb}<1,-3|3,-1>( \
H=D-1,C1=(H&8)/8 +(H&4)+(H&2)*8+(H&1)*64, \
A=S-1,C2=(A&8)/8 +(A&4)+(A&2)*8+(A&1)*64, \
C1:8,C2:8,10:7,F:1,0:1,-10.2m)+ [D:1..16,S:1..16,F:0..1]
|
Tested in IrpMaster, and will be included in next version of IrpProtocols.ini.
Note that I have here used a parametrization compatible with what is printed on the switches (1..16 and A..P) which is a 1-based index. I think it is user friendlier (HERE!) to have the parameters to be the one printed on the hardware than to use the more programmer-friendly 0-based indexation, thus forcing the user to error prone subtractions. My D corresponds to the "House numbers" A to P, my S to the address (1 to 16). F=0 is the power off command, F=1 the power on command. The power on command is also used for dimming, both up and down. |
|
Back to top |
|
|
|
|
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum
|
Powered by phpBB © 2001, 2005 phpBB Group
|