View previous topic :: View next topic |
Author |
Message |
landolfi
Joined: 12 Apr 2006 Posts: 57 Location: Chicagoland |
Posted: Sat Feb 25, 2012 1:09 pm Post subject: 1056B01-L downloads but won't send device commands |
|
|
Hi,
I bought a WOW-branded 1056B01-L on eBay. Device signature is 30033033, and I'm using the OCAP Black RDF. I am using the same setup codes as I am on another 1056 which works, but these codes were downloaded to the remote but don't work. I also noticed I can't setup the cable box on the remote (single flashes for all valid 1056 codes), even after a 981 reset. All the device code locks are set to off. I posted an RMIR file downloaded from the remote here. |
|
Back to top |
|
|
vickyg2003 Site Admin
Joined: 20 Mar 2004 Posts: 7073 Location: Florida |
Posted: Sun Feb 26, 2012 8:00 pm Post subject: |
|
|
Was it a used 1056? The reason I ask, is it almost sounds like an "extender" was added to the remote, and then it wasn't reset before turning it in, but I'm sure our members are more considerate than to do something like that. |
|
Back to top |
|
|
landolfi
Joined: 12 Apr 2006 Posts: 57 Location: Chicagoland |
Posted: Sun Feb 26, 2012 8:13 pm Post subject: |
|
|
Thanks for the reply. Yes, it was used. Would a 981 reset get rid of an extender? Or could I tell in RMIR that an extender was present? It looks to me like the POWER button is defective, because if I assign POWER to a different key it works, the other keys I've checked look OK too. But unless there's something else I can try, I'm just going to return this one. |
|
Back to top |
|
|
|