993

From JP1 Remotes Wiki
Revision as of 17:18, 28 September 2014 by The Robman (talk | contribs) (Created page with "==(993) Volume Punch Through== {{:VPT Style 1}} {{:VPT Style 2}} <noinclude>Category:9xx Commands</noinclude>")
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to navigationJump to search

(993) Volume Punch Through

  1. TAP the device, (TV, VCR, CABLE, etc.), button - RELEASE
  2. PRESS and HOLD the SETUP button until the red LED flashes twice, then RELEASE.
  3. TAP 9 - 9 - 3.
  4. TAP the device key you would like the volume to come from. Two blinks.

To unlock volume control for a single device:

  1. TAP the device key you wish to unlock (AV1, AV2, etc.) - RELEASE
  2. PRESS and HOLD the SETUP button until the red LED flashes twice, then RELEASE.
  3. TAP 9 - 9 - 3.
  4. TAP VOL-. Four blinks.
  5. Repeat 1-4 to unlock other devices.

To unlock all volume controls:

  1. PRESS and HOLD the SETUP button until the red LED flashes twice, then RELEASE.
  2. TAP 9 - 9 - 3.
  3. TAP VOL+. Four blinks.

The RCA RCRP05B handles the 993 Volume Punch Through commands differently. It has the capabilty to assign the Volume group (Vol+, Vol-, mute) of any device to any other device button(s). Note that the instruction sheet provided with the remote is wrong.

To lock all devices to one VPT device:

  1. PRESS and HOLD the SETUP button until the red LED flashes twice, then RELEASE.
  2. TAP 9 - 9 - 3. Two blinks.
  3. TAP Vol+
  4. TAP the VPT device button. Two blinks of the selected device.

To unlock volume control for all devices:

  1. PRESS and HOLD the SETUP button until the red LED flashes twice, then RELEASE.
  2. TAP 9 - 9 - 3. Two blinks.
  3. TAP VOL-. Four blinks.

To assign the Volume group of one device to a set of devices:

  1. TAP the device button of the desired Volume group
  2. PRESS and HOLD the SETUP button until the red LED flashes twice, then RELEASE.
  3. TAP 9 - 9 - 3. Two blinks
  4. TAP each device button in the set of devices to be reassigned
  5. TAP Setup. Two blinks of the VPT device.

For example, Setup, 993, Vol+, CBL. Now pressing Vol in any device mode causes the CBL Volume command to be sent.

Second example: AUD, Setup, 993, DVD, CBL, TV, Setup. Now pressing Vol while in DVD, CBL, or TV mode will send the AUD Vol commands. But in AUD or DVR mode, the Cable volume commands will be sent.