983

(983) Remote Signature Blink Back

1. TAP the device, (TV, VCR, CABLE, etc.), button - RELEASE
2. PRESS and HOLD the SETUP button until the red LED flashes twice, then RELEASE.
3. TAP 9 - 8 - 3.
4. TAP 1, carefully COUNT the number of blinks. (1st digit)
5. TAP 2, carefully COUNT the number of blinks. (2nd digit)
6. TAP 3, carefully COUNT the number of blinks. (3rd digit)
7. TAP 4, carefully COUNT the number of blinks. (4th digit)
8. TAP 5, carefully COUNT the number of blinks. (5th digit - JP1.4/JP1.4N/JP2 remotes only)

If the remote DOES NOT blink it means the number is 0. This is your signature code.

• JP1.2 remotes will have 4 digits starting with a 1
• JP1.3 remotes will have 4 digits starting with a 3
• JP1.4 remotes will have 5 digits starting with a 3 (and JP1.4N)
• JP2 remotes will have 5 digits starting with a 2