974: Difference between revisions

From JP1 Remotes Wiki
Jump to navigationJump to search
Created page with "==(974) Turning On/Off Back-lighting== Some some hard-button remotes have a button that will turn on off back lighting on the fly. The button will have an icon that look..."
 
Line 5: Line 5:
#PRESS and HOLD the SETUP button until the red LED flashes twice.
#PRESS and HOLD the SETUP button until the red LED flashes twice.
#TAP 9 - 7 - 4, the red LED will flash twice if the back light is turned on, 4 times if the back light is turned off.
#TAP 9 - 7 - 4, the red LED will flash twice if the back light is turned on, 4 times if the back light is turned off.
On the  OARUSB04G (and also URC-6440) the 974 does not work but the TILT function can be disabled by this method:
#PRESS and Hold Setup button until 2 blinks of TV button,
#Press Pause button. The TV button will blink:
##2 times - capacitive hand sensor enabled
##4 times - capacitive hand sensor disabled


<noinclude>[[Category:9xx Commands]]</noinclude>
<noinclude>[[Category:9xx Commands]]</noinclude>

Revision as of 15:19, 19 September 2017

(974) Turning On/Off Back-lighting

Some some hard-button remotes have a button that will turn on off back lighting on the fly. The button will have an icon that looks like a lightbulb. If the lightbulb is on the SET/Magic/Setup button it usually needs to be double tapped to turn on/off the backlight. On other backlit hard-button remotes, the button doesn't exist or doesn't work.


  1. PRESS and HOLD the SETUP button until the red LED flashes twice.
  2. TAP 9 - 7 - 4, the red LED will flash twice if the back light is turned on, 4 times if the back light is turned off.

On the OARUSB04G (and also URC-6440) the 974 does not work but the TILT function can be disabled by this method:

  1. PRESS and Hold Setup button until 2 blinks of TV button,
  2. Press Pause button. The TV button will blink:
    1. 2 times - capacitive hand sensor enabled
    2. 4 times - capacitive hand sensor disabled