990: Difference between revisions
From JP1 Remotes Wiki
Jump to navigationJump to search
The Robman (talk | contribs) Created page with "==(990) Code Blink Back - Find current device code.== #TAP the device, (TV, VCR, CABLE, etc.), button - RELEASE #PRESS and HOLD the SETUP button until the red LED flashes..." |
(No difference)
|
Revision as of 17:16, 28 September 2014
(990) Code Blink Back - Find current device code.
- TAP the device, (TV, VCR, CABLE, etc.), button - RELEASE
- PRESS and HOLD the SETUP button until the red LED flashes twice, then RELEASE.
- TAP 9 - 9 - 0.
- TAP 1, carefully COUNT the number of blinks. (1st digit)
- TAP 2, carefully COUNT the number of blinks. (2nd digit)
- TAP 3, carefully COUNT the number of blinks. (3rd digit)
- TAP 4, carefully COUNT the number of blinks. (4th digit)
- TAP 5, carefully COUNT the number of blinks. (5th digit), for remotes with 5 digit codes
If the remote DOES NOT blink it means the number is 0. This is your setup code.
