Brief and incomplete guide to reading IRP - Revision history

The Robman: 5 revisions imported

2025-11-02T18:41:15Z

5 revisions imported

← Older revision	Revision as of 18:41, 2 November 2025
(No difference)

The Robman at 18:09, 5 October 2014

2014-10-05T18:09:48Z

← Older revision		Revision as of 18:09, 5 October 2014
Line 51:		Line 51:
	:Up to 3 expressions enclosed in square brackets. The first variation is sent on the first transmission, second for middle transmissons, and the third for the final transmission. E.g. the Zaptor toggle bit is zero until the last frame: [T=0] [T=0] [T=1]		:Up to 3 expressions enclosed in square brackets. The first variation is sent on the first transmission, second for middle transmissons, and the third for the final transmission. E.g. the Zaptor toggle bit is zero until the last frame: [T=0] [T=0] [T=1]

	==Further Reading==		===Further Reading===
	*[[IRP Notation]] by Graham Dixon		*[[IRP Notation]] by Graham Dixon
	*[http://www.hifi-remote.com/forums/dload.php?action=file&file_id=6996\|Practical explanation of IR signals and IRP] by Vicky Getz		*[http://www.hifi-remote.com/forums/dload.php?action=file&file_id=6996\|Practical explanation of IR signals and IRP] by Vicky Getz

The Robman: /* Variations */

2014-10-05T18:07:19Z

Variations

← Older revision		Revision as of 18:07, 5 October 2014
Line 51:		Line 51:
	:Up to 3 expressions enclosed in square brackets. The first variation is sent on the first transmission, second for middle transmissons, and the third for the final transmission. E.g. the Zaptor toggle bit is zero until the last frame: [T=0] [T=0] [T=1]		:Up to 3 expressions enclosed in square brackets. The first variation is sent on the first transmission, second for middle transmissons, and the third for the final transmission. E.g. the Zaptor toggle bit is zero until the last frame: [T=0] [T=0] [T=1]

			==Further Reading==
	[[IRP Notation]] by Graham Dixon		*[[IRP Notation]] by Graham Dixon
			*[http://www.hifi-remote.com/forums/dload.php?action=file&file_id=6996\|Practical explanation of IR signals and IRP] by Vicky Getz
	[http://www.hifi-remote.com/forums/dload.php?action=file&file_id=6996\|Practical explanation of IR signals and IRP by Vicky Getz]

The Robman at 18:06, 5 October 2014

2014-10-05T18:06:13Z

← Older revision		Revision as of 18:06, 5 October 2014
Line 2:		Line 2:

	===General===		===General===
	:{carrier frequency, time unit, sequencing rule} Mitsubishi:~~===~~{32.6k,300}~~===~~<1,-3\|1,-7>(D:8,F:8,1,-80)+		:{carrier frequency, time unit, sequencing rule} Mitsubishi:{32.6k,300}<1,-3\|1,-7>(D:8,F:8,1,-80)+

	===Carrier Frequency===		===Carrier Frequency===
Line 42:		Line 42:

	===Definitions===		===Definitions===
	Expressions separated by commas, enclosed in curly brackets.		:Expressions separated by commas, enclosed in curly brackets.
	GI Cable: :{38.7k,490}<1,-4.5\|1,-9>(18,-9,F:8,D:4,C:4,1,-84,(18,-4.5,1,-178)*) {C = -(D + F:4 + F:4:4)}		:GI Cable: :{38.7k,490}<1,-4.5\|1,-9>(18,-9,F:8,D:4,C:4,1,-84,(18,-4.5,1,-178)*) {C = -(D + F:4 + F:4:4)}

	===Assignments===		===Assignments===

The Robman: /* Permitted operators in decreasing order of precedence */

2014-10-05T18:04:13Z

Permitted operators in decreasing order of precedence

← Older revision		Revision as of 18:04, 5 October 2014
Line 41:		Line 41:
	:# ~ (complement) is permitted in Bitfields		:# ~ (complement) is permitted in Bitfields

	===Definitions=== ~~expressions~~ separated by commas, enclosed in curly brackets. GI Cable: :{38.7k,490}<1,-4.5\|1,-9>(18,-9,F:8,D:4,C:4,1,-84,(18,-4.5,1,-178)*) {C = -(D + F:4 + F:4:4)}		===Definitions===
			Expressions separated by commas, enclosed in curly brackets.
			GI Cable: :{38.7k,490}<1,-4.5\|1,-9>(18,-9,F:8,D:4,C:4,1,-84,(18,-4.5,1,-178)*) {C = -(D + F:4 + F:4:4)}

	===Assignments===		===Assignments===

The Robman: Created page with "==Brief and incomplete guide to reading IRP== ===General=== :{carrier frequency, time unit, sequencing rule} Mitsubishi:==={32.6k,300}===<1,-3|1,-7>(D:8,F:8,1,-80)+ ===Carri..."

2014-09-27T23:53:40Z

Created page with "==Brief and incomplete guide to reading IRP== ===General=== :{carrier frequency, time unit, sequencing rule} Mitsubishi:==={32.6k,300}===<1,-3|1,-7>(D:8,F:8,1,-80)+ ===Carri..."

New page

==Brief and incomplete guide to reading IRP==

===General===
:{carrier frequency, time unit, sequencing rule} Mitsubishi:==={32.6k,300}===<1,-3|1,-7>(D:8,F:8,1,-80)+

===Carrier Frequency===
:Hz; e.g. 38.3k; default is 0k--no modulation

===Time Unit===
:Integer that can represent durations. Suffix u (default) is microseconds, p denotes number of pulses of the carrier.

===Sequencing Rule===
:lsb|msb; lsb (default) means the least significant bit of a binary form is sent first.

===BitSpec===
:Rule for the translating bit sequences to duration sequences. <ZeroPulseSeq|OnePulseSeq|TwoPulseSeq....>. Most IR protocols use only <ZeroPulseSeq|OnePulseSeq>, and the sequence is simply OnDuration,OffDuration. Example: NEC uses <1,-1|1,-3>

===Bitfield===
:D:NumberOfBits:StartingBit. E.g. if D=71= 01000111, D:2:5 means x10xxxxx. D:2:5 = 10b = 2. ~ is the bitwise complement operator. ~D =10111000. Specifying the StartingBit is optional. D:6 is equivalent to D:6:0.

===IRStream===
:The sequence of data. Enclosed in parentheses, items separated by commas. A trailing + means send one or more times. A trailing 3 means send 3 times; 3+ means at least 3 times. A trailing * means send zero or more times. NEC2: {38.4k,564}<1,-1|1,-3>(16,-8,D:8,S:8,F:8,~F:8,1,-78)+

===Durations===
:no suffix means duration is expressed in Time Units, as defined above. m is milliseconds, u microsec, p pulses. No prefix means a flash, a preceding - (minus) means a gap.

===Extent===
:A gap which trails a signal. The trailing gap is adjusted to make the total length of signal plus trailing gap equal to the extent. Notation is like a gap duration, except ^ replaces the minus sign. RC-5:(1:1,~F:1:6,T:1,D:5,F:6,^114m)+

===Expressions===
:names, numbers and bitfields connected by standard symbols for arithmetic and logical operations. Enclosed in parentheses. Panasonic: {37k,432}<1,-1|1,-3>(8,-4,2:8,32:8,D:8,S:8,F:8,(D^S^F):8,1,-173)+

===Permitted operators in decreasing order of precedence===
:# unary – (negation)
:# &lowast;&lowast; (exponentiation)
:# &lowast; /, % (multiplication, integer division, modulo) (* is also used in IRStreams)
:# +, – (addition, subtraction (+ is also used in IRStreams)
:# & (bitwise AND)
:# ^ (exclusive OR) (also used in extents)
:# | (OR)
:# ~ (complement) is permitted in Bitfields

===Definitions=== expressions separated by commas, enclosed in curly brackets. GI Cable: :{38.7k,490}<1,-4.5|1,-9>(18,-9,F:8,D:4,C:4,1,-84,(18,-4.5,1,-178)*) {C = -(D + F:4 + F:4:4)}

===Assignments===
:For example T=T+1, which can be used to describe the RC-5 toggle bit.

===Variations===
:Up to 3 expressions enclosed in square brackets. The first variation is sent on the first transmission, second for middle transmissons, and the third for the final transmission. E.g. the Zaptor toggle bit is zero until the last frame: [T=0] [T=0] [T=1]

[[IRP Notation]] by Graham Dixon

[http://www.hifi-remote.com/forums/dload.php?action=file&file_id=6996|Practical explanation of IR signals and IRP by Vicky Getz]