15-1994 - Revision history

The Robman: 28 revisions imported

2025-11-02T18:52:52Z

28 revisions imported

← Older revision	Revision as of 18:52, 2 November 2025
(No difference)

The Robman: /* How To Use The SHIFT button */

2020-02-27T20:11:41Z

How To Use The SHIFT button

← Older revision		Revision as of 20:11, 27 February 2020
Line 24:		Line 24:
	NOTE: Once you have activated the remote's built-in sleep timer, you must keep the remote pointed directly at the component. Once the specified time has elapsed, the 15-1994 will activate the POWER button to power off your device.		NOTE: Once you have activated the remote's built-in sleep timer, you must keep the remote pointed directly at the component. Once the specified time has elapsed, the 15-1994 will activate the POWER button to power off your device.

	==How To Use The SHIFT ~~button~~==		==How To Use The SHIFT function==
	It is possible to store two commands on one button by using the SHIFT key, the SETUP button acts as a shift key on these remotes. During the process of programming individual buttons, whether by learning or by using advanced codes, if you TAP SETUP before selecting the button where the command will be assigned, the function will be stored on the shifted version of the button. Then when you wish to use the button, TAP SETUP before you TAP the button. Shifted keys can be used for learned commands, commands programmed using advanced codes and for macros.		It is possible to store two commands on one button by using the SHIFT key, the SETUP button acts as a shift key on these remotes. During the process of programming individual buttons, whether by learning or by using advanced codes, if you TAP SETUP before selecting the button where the command will be assigned, the function will be stored on the shifted version of the button. Then when you wish to use the button, TAP SETUP before you TAP the button. Shifted keys can be used for learned commands, commands programmed using advanced codes and for macros.

The Robman at 20:10, 27 February 2020

2020-02-27T20:10:59Z

← Older revision		Revision as of 20:10, 27 February 2020
Line 1:		Line 1:
	'''How to Program the Radio Shack 15-1994 Remote'''		'''How to Program the Radio Shack 15-1994 Remote'''
	[[Image:15-1994.jpg\|right]]		[[Image:15-1994.jpg\|right]]
	This manual is designed to show you everything that this remote is capable of doing, including functions not specified in the original manual. You can review the original manual <span class="plainlinks">[http://www.hifi-remote.com/manuals/manual.shtml?15-1994 here]</span>. This remote ~~was made~~ around 1999, so the ~~build~~ in code database is quite dated now, ~~but~~ new codes can be added using [[Main Page\|JP1]].		This manual is designed to show you everything that this remote is capable of doing, including functions not specified in the original manual. You can review the original manual <span class="plainlinks">[http://www.hifi-remote.com/manuals/manual.shtml?15-1994 here]</span>. This remote dates from around 1999, so the built-in code database is quite dated now, however new codes can be added using [[Main Page\|JP1]].

	==Programming Setup Codes==		==Programming Setup Codes==

The Robman at 20:10, 27 February 2020

2020-02-27T20:10:17Z

← Older revision		Revision as of 20:10, 27 February 2020
Line 274:		Line 274:
	*TAP 9 - 8 - 0 -- Two blinks.		*TAP 9 - 8 - 0 -- Two blinks.

	NOTE: This will not clear the codes assigned to the device buttons.		NOTE: This will not clear the codes assigned to the device buttons and it won't remove any upgrades that have been added. It's NOT a full factory reset.

	==981 - Restoring Factory Defaults==		==981 - Restoring Factory Defaults==
Line 280:		Line 280:
	*TAP 9 - 8 - 1 -- Two blinks.		*TAP 9 - 8 - 1 -- Two blinks.

	NOTE: This will erase all key moves, macros, learned functions, device settings, upgrades, etc.		NOTE: This will erase all key moves, macros, learned functions, device settings, upgrades, etc. This is a full factory reset, all user programming will be lost.

The Robman: /* Using the favorite channel scan */

2020-02-27T20:00:25Z

Using the favorite channel scan

← Older revision		Revision as of 20:00, 27 February 2020
Line 224:		Line 224:
	*Repeat the last step for up to 9 other channels you want to include in your list, then hold down SETUP until the red light blinks twice.		*Repeat the last step for up to 9 other channels you want to include in your list, then hold down SETUP until the red light blinks twice.

	===Using the ~~favorite channel scan~~===		===Using the Favorite Channel Scan===
	To scan through your favorite channel list, TAP the appropriate device key, point the remote at your device, then TAP SCAN. The remote control repeatedly scans through the favorite channel list, stopping on each channel for about 3 seconds.		To scan through your favorite channel list, TAP the appropriate device key, point the remote at your device, then TAP SCAN. The remote control repeatedly scans through the favorite channel list, stopping on each channel for about 3 seconds.

The Robman: /* 995 - Macros */

2020-02-27T16:29:51Z

995 - Macros

← Older revision		Revision as of 16:29, 27 February 2020
Line 171:		Line 171:
	==995 - Macros==		==995 - Macros==
	===Programming Macros===		===Programming Macros===
	This will allow you do do several functions with just the touch of ~~ONE~~ key. A macro can hold up to 15 ~~keyTAPes~~.		This will allow you do do several functions with just the touch of one key. A macro can hold up to 15 keys.

	*TAP the device (TV, VCR, CABLE, etc.) button		*TAP the device (TV, VCR, CABLE, etc.) button
Line 183:		Line 183:

	NOTE: Some remotes have buttons specially designed to hold macro's, but macro's can actually be assigned to any button, just remember that the macro will be assigned to this button in all device modes.		NOTE: Some remotes have buttons specially designed to hold macro's, but macro's can actually be assigned to any button, just remember that the macro will be assigned to this button in all device modes.
	~~If you placed a macro on a button that you wish to restore to it's original function under certain device modes, you can re-program the button using the advanced codes.~~

	NOTE2: Macros cannot be programmed to the device buttons, the SETUP button, SLEEP button, or the FAV/SCAN button.		NOTE2: If you wish to override a macro in certain device modes, you can re-program the button using the [[15-1994#994 - Keymover\|key moves]] or [[15-1994#975 - Learning Functions\|learning]].

			NOTE3: Macros cannot be programmed to the device buttons, the SETUP button, SLEEP button, or the FAV/SCAN button.

	===Deleting Macros===		===Deleting Macros===

The Robman: /* Assigning Advanced Codes */

2020-02-27T16:18:42Z

Assigning Advanced Codes

← Older revision		Revision as of 16:18, 27 February 2020
Line 142:		Line 142:
	NOTE2: Functions cannot be copied to the device buttons, the SETUP button, SLEEP button, or the FAV/SCAN button.		NOTE2: Functions cannot be copied to the device buttons, the SETUP button, SLEEP button, or the FAV/SCAN button.

	===~~Assigning~~ Advanced Codes===		===Programming Advanced Codes===
	*TAP the device, (TV, VCR, CABLE, etc.), button		*TAP the device, (TV, VCR, CABLE, etc.), button
	*PRESS and HOLD the SETUP button until the red LED flashes twice, then release.		*PRESS and HOLD the SETUP button until the red LED flashes twice, then release.

The Robman: /* Restore Volume Default - One Device */

2020-02-27T16:18:15Z

Restore Volume Default - One Device

← Older revision		Revision as of 16:18, 27 February 2020
Line 118:		Line 118:
	*TAP 9 - 9 - 3		*TAP 9 - 9 - 3
	*TAP the VOLUME- key, you will get four blinks.		*TAP the VOLUME- key, you will get four blinks.

	~~Now the volume is set for all original devices.~~

	===Restore Volume Default - All Devices===		===Restore Volume Default - All Devices===

The Robman: /* 993 - Volume Punch Through */

2020-02-27T16:18:04Z

993 - Volume Punch Through

← Older revision		Revision as of 16:18, 27 February 2020
Line 112:		Line 112:
	'''NOTE #3:''' When programmed using [[Main Page\|JP1]], VPT can be set to any device (including AUX and CD), not just TV, but it is still only effective in TV, VCR and CBL/SAT modes.		'''NOTE #3:''' When programmed using [[Main Page\|JP1]], VPT can be set to any device (including AUX and CD), not just TV, but it is still only effective in TV, VCR and CBL/SAT modes.

	===Restore Volume Default===		===Restore Volume Default - One Device===
			Use this to get the original volume to work on a single device.
			*TAP the device (TV, VCR, CABLE, etc.) button
			*PRESS and HOLD the SETUP button until the red LED flashes twice, then release.
			*TAP 9 - 9 - 3
			*TAP the VOLUME- key, you will get four blinks.

			Now the volume is set for all original devices.

			===Restore Volume Default - All Devices===
	Use this to get the original volume to work on each device.		Use this to get the original volume to work on each device.
	*PRESS and HOLD the SETUP button until the red LED flashes twice, then release.		*PRESS and HOLD the SETUP button until the red LED flashes twice, then release.
	*TAP 9 - 9 - 3		*TAP 9 - 9 - 3
	*TAP the VOLUME+ key, you will get ~~two~~ blinks.		*TAP the VOLUME+ key, you will get four blinks.

	Now the volume is set for all original devices.		Now the volume is set for all original devices.

The Robman: /* Setting Volume Punch Through (VPT) */

2020-02-27T16:13:43Z

Setting Volume Punch Through (VPT)

← Older revision		Revision as of 16:13, 27 February 2020
Line 107:		Line 107:
	*Two blinks.		*Two blinks.

	NOTE #1: This only sets volume in the TV, VCR and CBL/SAT mode.<br>		'''NOTE #1:''' This only sets volume in the TV, VCR and CBL/SAT mode.<br>
	NOTE #2: You can only punch the volume though to the TV.<br>		'''NOTE #2:''' You can only punch the volume though to the TV.<br>
	Remember, if the volume punch through doesn't meet your needs, you can always program the volume controls using KEY MOVES. For instance, if you want the volume controls in CD mode to work your amplifier which is on the AUX button, then you would use the 994 command and move the 3 volume controls from AUX to CD. ~~See~~ the ~~KEY MOVES section for more info~~.		Remember, if the volume punch through doesn't meet your needs, you can always program the volume controls using [[15-1994#994 - Keymover\|KEY MOVES]]. For instance, if you want the volume controls in CD mode to work your amplifier which is on the AUX button, then you would use the 994 command and move the 3 volume controls from AUX to CD. You could also [[15-1994#975 - Learning Functions\|learn]] the volume buttons from your original remote.<br>
	NOTE #3: When programmed using [[Main ~~menu~~\|JP1]], VPT can be set to any device (including AUX and CD), not just TV, but it is still only effective in TV, VCR and CBL/SAT modes.		'''NOTE #3:''' When programmed using [[Main Page\|JP1]], VPT can be set to any device (including AUX and CD), not just TV, but it is still only effective in TV, VCR and CBL/SAT modes.

	===Restore Volume Default===		===Restore Volume Default===