View source for 995

==([[995]]) Macros - Multiple functions to single button==
<noinclude>[[Category:9xx Commands]]</noinclude>
The macro will be invoked in all device modes.  See also 978 for single device macros.
===[[Single macro buttons]]===

#PRESS and HOLD the SETUP button until the red LED flashes twice, then RELEASE.
#TAP 9 - 9 - 5, two flashes.
#TAP the key that you want the Macro to be on.
#TAP the sequence of keys you want the remote to do (up to 15 keys)
#TAP "SETUP" and wait for two blinks - RELEASE.
When you hit the key you put the macro on it will automatically start the sequence.

'''NOTES''':
:*Macros can be assigned to any button, just remember that the macro will be assigned to this button in all device modes.
:*If you placed a macro on a button that you wish to restore to its original function under certain device modes, you can re-program the button using the advanced codes.
:*Macros cannot be programmed to the device buttons or the SETUP button.
<noinclude>[[Category:9xx Commands]]</noinclude>

===Multimacro buttons===

These buttons (e.g. OnDemand) allow the user to record several macros by repeating the above single macro procedure.
The multimacro key can hold up to 5 macros. Each time you TAP it, the next macro runs. Macro size varies with remotes.
<noinclude>[[Category:9xx Commands]]</noinclude>

===Clearing macros===

#PRESS and HOLD the SETUP button until the red LED flashes twice, then RELEASE.
#TAP 9 - 9 - 5, two flashes.
#TAP the key that you want to clear the Macro from.
#TAP "SETUP" and wait for two blinks - RELEASE.

<noinclude>[[Category:9xx Commands]]</noinclude>