JP1 Remotes

Does anyone have a discrete power codes for Dreambox DM800 PVR (HD)?

jspassov wrote:Does anyone have a discrete power codes for Dreambox DM800 PVR (HD)?

Are you still looking for these? If so I'll try to remember to send you tomorrow if you want?

Even if jspassov doesn't respond, could you please post the discrete codes anyway, that way they'll be documented for anyone else that might be looking for them.

The Robman wrote:Even if jspassov doesn't respond, could you please post the discrete codes anyway, that way they'll be documented for anyone else that might be looking for them.

Unfortunately they are for the type Box DM 500 & 7000. I assumed (incorrectly) that they would work on the DM 800; they do not. For the record they are

On e8
Off b4

prwoolfall wrote:

The Robman wrote:Even if jspassov doesn't respond, could you please post the discrete codes anyway, that way they'll be documented for anyone else that might be looking for them.

Unfortunately they are for the type Box DM 500 & 7000. I assumed (incorrectly) that they would work on the DM 800; they do not. For the record they are

On e8
Off b4

From the Gemini Project (if it helps)

Gemini2 v4.1
DM7025 = Enigma from 06.02.2009
DM800 and DM8000 = Enigma from 07.02.2009

New:
* File-Manager extended (Information, display and favourites). It´s now eaysier to achieve, simply press BLUE-RED
* In the channel list, the distance between the stations and the actual EPG event can be changed by yourself (BP-> Settings-> General)
* At Dreamnetcast and the jukebox you can chose the background
* Menu´s extra/settings seperated. BP has partly new construction (Addons are now at BP-> Settings to find)
* Discrete OFF(Standby) by shift-0, ON by shift-1, OFF (Deep Standby) by shift-2 (DM8000 not with original Remotecontrol)

prwoolfall wrote:For the record they are

On e8
Off b4

As these are not JP1 codes, could you also post some known codes (like POWER, CH+, etc) so we can compare them and figure out how to convert them to JP1 codes.

prwoolfall wrote:

prwoolfall wrote:

The Robman wrote:Even if jspassov doesn't respond, could you please post the discrete codes anyway, that way they'll be documented for anyone else that might be looking for them.

Unfortunately they are for the type Box DM 500 & 7000. I assumed (incorrectly) that they would work on the DM 800; they do not. For the record they are

On e8
Off b4

From the Gemini Project (if it helps)

Gemini2 v4.1
DM7025 = Enigma from 06.02.2009
DM800 and DM8000 = Enigma from 07.02.2009

New:
* File-Manager extended (Information, display and favourites). It's now eaysier to achieve, simply press BLUE-RED
* In the channel list, the distance between the stations and the actual EPG event can be changed by yourself (BP-> Settings-> General)
* At Dreamnetcast and the jukebox you can chose the background
* Menu's extra/settings seperated. BP has partly new construction (Addons are now at BP-> Settings to find)
* Discrete OFF(Standby) by shift-0, ON by shift-1, OFF (Deep Standby) by shift-2 (DM8000 not with original Remotecontrol)

From the PLI website (it was in Dutch so excuse if incorrect)

'Go to' in your Dream Image (using an FTP program).

/usr/share/tuxbox/enigma/resources/rclargesilver.xml

hex code 50 en 51

<key name="discrete_off" code="50"/>
<key name="discrete_on" code="51"/>

Haven't tried it yet myself.

Will tonight.

The Robman wrote:

prwoolfall wrote:For the record they are

On e8
Off b4

As these are not JP1 codes, could you also post some known codes (like POWER, CH+, etc) so we can compare them and figure out how to convert them to JP1 codes.

They are power on and power off. They are in HEX and if you use in JP1 (Remote Master) they will work in whatever key you map them too. I have used them in the original remote and a 10820 I purchased from you.

You need to enter them (in hex) as E8 00 and B4 00 on your template in RM (use any from those listed on the forum) and as stated above, map them where ever you wish.

prwoolfall wrote:

The Robman wrote:

prwoolfall wrote:For the record they are

On e8
Off b4

As these are not JP1 codes, could you also post some known codes (like POWER, CH+, etc) so we can compare them and figure out how to convert them to JP1 codes.

They are power on and power off. They are in HEX and if you use in JP1 (Remote Master) they will work in whatever key you map them too. I have used them in the original remote and a 10820 I purchased from you.

You need to enter them (in hex) as E8 00 and B4 00 on your template in RM (use any from those listed on the forum) and as stated above, map them where ever you wish.

For convenience I have posted an rmdu file on Device Upgrades (Sat Section) entitled "DB V4 ORIGINAL WITH DISCRETE"

prwoolfall wrote:

prwoolfall wrote:

The Robman wrote: As these are not JP1 codes, could you also post some known codes (like POWER, CH+, etc) so we can compare them and figure out how to convert them to JP1 codes.

They are power on and power off. They are in HEX and if you use in JP1 (Remote Master) they will work in whatever key you map them too. I have used them in the original remote and a 10820 I purchased from you.

You need to enter them (in hex) as E8 00 and B4 00 on your template in RM (use any from those listed on the forum) and as stated above, map them where ever you wish.

For convenience I have posted an rmdu file on Device Upgrades (Sat Section) entitled "DB V4 ORIGINAL WITH DISCRETE"

OK The code for the DB800 as HEX (again enter into the KM) is

Power On 61 00
Power Off 60 00

Checked and working on the DB remote and should be OK for all others. Remember the codes are in HEX and if you enter in the KM for the file mentioned above they work fine and I have tested them,

If you total shut down i.e. deep standby then use 62 00 (as Hex).

That's it

I'm trying to use the power on and off discrete codes for dreambox 800 on my Pronto. I can't understand how to input the codes as provided in the previous answer (Power On 61 00, Power Off 60 00) to the Pronto.

From browsing to another site, I saw that "Power On" decodes to:

0000 006D 0012 0012 0008 001D 0008 0065 0008 001D 0008 006A 0008 0032 0008 0032 0008 0022 0008 0051 0008 020D 0008 001D 0008 004B 0008 001D 0008 001D 0008 003C 0008 0022 0008 001D 0008 001D 0008 0BF2 0008 001D 0008 0065 0008 001D 0008 006A 0008 0032 0008 0032 0008 0022 0008 0051 0008 020D 0008 001D 0008 0022 0008 0046 0008 001D 0008 003C 0008 0022 0008 001D 0008 001D 0008 0BF2

and "Power Off" decodes to:

0000 006D 0012 0012 0008 001D 0008 0065 0008 001D 0008 006A 0008 0032 0008 0032 0008 0022 0008 0051 0008 020D 0008 001D 0008 0051 0008 001D 0008 001D 0008 003C 0008 001D 0008 001D 0008 001D 0008 0BF2 0008 001D 0008 0065 0008 001D 0008 006A 0008 0032 0008 0032 0008 0022 0008 0051 0008 020D 0008 001D 0008 0027 0008 0046 0008 001D 0008 003C 0008 001D 0008 001D 0008 001D 0008 0BF2

However, none of these codes work when i test them on the Pronto. Can someone please help? Thank you for your time.

cutter wrote:I'm trying to use the power on and off discrete codes for dreambox 800 on my Pronto. I can't understand how to input the codes as provided in the previous answer (Power On 61 00, Power Off 60 00) to the Pronto.

From browsing to another site, I saw that "Power On" decodes to:

0000 006D 0012 0012 0008 001D 0008 0065 0008 001D 0008 006A 0008 0032 0008 0032 0008 0022 0008 0051 0008 020D 0008 001D 0008 004B 0008 001D 0008 001D 0008 003C 0008 0022 0008 001D 0008 001D 0008 0BF2 0008 001D 0008 0065 0008 001D 0008 006A 0008 0032 0008 0032 0008 0022 0008 0051 0008 020D 0008 001D 0008 0022 0008 0046 0008 001D 0008 003C 0008 0022 0008 001D 0008 001D 0008 0BF2

and "Power Off" decodes to:

0000 006D 0012 0012 0008 001D 0008 0065 0008 001D 0008 006A 0008 0032 0008 0032 0008 0022 0008 0051 0008 020D 0008 001D 0008 0051 0008 001D 0008 001D 0008 003C 0008 001D 0008 001D 0008 001D 0008 0BF2 0008 001D 0008 0065 0008 001D 0008 006A 0008 0032 0008 0032 0008 0022 0008 0051 0008 020D 0008 001D 0008 0027 0008 0046 0008 001D 0008 003C 0008 001D 0008 001D 0008 001D 0008 0BF2

However, none of these codes work when i test them on the Pronto. Can someone please help? Thank you for your time.

The codes I provided are valid for use in the Gemini Image Only.

That explains it... However, I never thought that the image used was a factor since i believed that the IR codes are hardwired in the DM hardware... I'm using Nabilosat Black hole 0.11; any chance of discovering the correct codes for this image?

No idea; ask on a Nabilosat forum.