JP1 Remotes

1. Device: Dell Vostro 1500 Laptop
2. Type of device: Misc
3. Year: 2008
4. JP1/UEI Remote model: RCA RCU810
5. Do you have a JP1 cable? yes
6. Still have original remote? no
7. Checked the file section? yes
8. Checked Pronto file section (at R/C)? yes
9. Partially working setup code? no
10. Learning remote question? yes

(Above entries added by Rob)

Dell Vostro 1400/1500 has an IR receiver. You can control it media centre with a remote. The remote can be bought from Dell. I want to program my JP1 remote to work with it, but I don't know the code. What I know is it uses Philips RC6 protocol. If anybody has the remote, you can get the code with a learning remote.
If anybody has the code, please post.
Thanks!

Why no answers? Its probably because you didn't follow the directions for this forum. You need to use the template. But as long as I'm here I think you ought to check out this thread. This deals with the Dell Media center.
Dell Media Center.

I almost posted a stupid answer earlier based on the "RC6" in the original post and ignoring the "Dell" and "media centre" hints.

MCE protocol is in the Philips RC6 family of protocols, but what we call "RC6 protocol" is just the original member of the family. The protocol you want is what we call "MCE", not what we call "RC6".

That old thread is probably still informative, especially the last few posts. But I think our tools have better support now for MCE protocol than you might guess from that thread.

I don't know what a "Dell Vostro" is, so even after reading that and other threads you still might need to do some guess and check about the device number.

In that old thread, I said

0.28 --> Dell "advanced TV"
43.28 --> Dell Media center

So 43.28 is a good guess. But a related Dell device could use anything from 0.28 through 127.28. I don't know if we've even recorded which Dell devices use which device numbers as people have discovered any after those first two.

1. Device: Dell Vostro 1500 Laptop
2. Type of device: Misc
3. Year: 2008
4. JP1/UEI Remote model: RCA RCU810
5. Do you have a JP1 cable? yes
6. Still have original remote? no
7. Checked the file section? yes
8. Checked Pronto file section (at R/C)? yes
9. Partially working setup code? no
10. Learning remote question? yes

Thanks for the reply.
I do have a MCE remote, it does not work with Dell Vostro 1500 IR receiver.

It needs this remote to operate which I do not have.
http://support.dell.com/support/topics/ ... doclang=en

qingz wrote:I do have a MCE remote, it does not work with Dell Vostro 1500 IR receiver.

Your MCE remote uses the MCE IR protocol with a specific device number (probably one of the Microsoft device numbers) that is different from the device number used by the Vostro.

To operate the device, the protocol needs to match AND the device number needs to match. In creating a JP1 upgrade for MCE, you can select any device number you want. The trick is guessing the device number for the Vostro.

Edit: Now that I read the page you linked: Where did you get "RC6" from?

If Dell calls the protocol "RC6", I'm sure the correct protocol is "MCE". But from looking at the page you linked, I see no clue what protocol it is.

qingz wrote:4. JP1/UEI Remote model: n/a
5. Do you have a JP1 cable? yes

Why do you have a JP1 cable if you don't have a JP1 remote? And what would you do with a JP1 upgrade if you had it? Are you really trying to program a Slingbox or something?

You also write in your initial post:

qingz wrote: I want to program my JP1 remote to work with it,

The Robman wrote:

qingz wrote:4. JP1/UEI Remote model: n/a
5. Do you have a JP1 cable? yes

Why do you have a JP1 cable if you don't have a JP1 remote? And what would you do with a JP1 upgrade if you had it? Are you really trying to program a Slingbox or something?

Sorry, I mean the specific remote from Dell in the link is not JP1 remote. I do have a JP1 remote which is RCA RCU810.

johnsfine wrote:

qingz wrote:I do have a MCE remote, it does not work with Dell Vostro 1500 IR receiver.

Your MCE remote uses the MCE IR protocol with a specific device number (probably one of the Microsoft device numbers) that is different from the device number used by the Vostro.

To operate the device, the protocol needs to match AND the device number needs to match. In creating a JP1 upgrade for MCE, you can select any device number you want. The trick is guessing the device number for the Vostro.

Edit: Now that I read the page you linked: Where did you get "RC6" from?

If Dell calls the protocol "RC6", I'm sure the correct protocol is "MCE". But from looking at the page you linked, I see no clue what protocol it is.

I got RC6 from other forum. He successfully programmed his Logitech Harmony remote to work with the Dell laptop. He said it is RC6.

Would this be the Dell Media Center? Cable 1272 is supposed to work the Dell Media center.

qingz wrote:I got RC6 from other forum. He successfully programmed his Logitech Harmony remote to work with the Dell laptop. He said it is RC6.

Could you post a link to the post in the other forum please.

qingz wrote:1. Device: Dell Vostro 1500 Laptop
4. JP1/UEI Remote model: RCA RCU810
5. Do you have a JP1 cable? yes

Found a match, Dell Media Center Remote. Trancoded it with the JP1 tools for your RCA RCU810. Apparently, looking at the information regarding this remote it is compatible with quite a few devices.

• RMDU: https://www.hifi-remote.com/forums/dload ... e_id=10536

Dell IR Travel Remote Control For Microsoft Windows Media Center Edition Systems Compatible Part Numbers: NU853, NU851, MR425. For: Vostro 1400, 1500, 1700; Studio 1535, 1536, 1735, 1737; Inspiron 1400, 1420, 1421, 1500, 1520, 1521, 1525, 1720, 1721, 1725; XPS M1330, M1530, M1730, M1770.

Features / Specifications:

• New in Box Item
• For Studio 1535, 1536, 1735, 1737
• For Vostro 1400, 1500, 1700
• For Inspiron 1400 , 1420, 1421, 1500, 1520, 1521, 1525, 1720, 1721, 1725.
• For XPS M1330, M1530, M1730, M177