JP1 Remotes

1. Device: Neuros OSD
2. Type of device: PVR ?
3. Year: 2007
4. JP1/UEI Remote model: URC-6820A
5. Do you have a JP1 cable? Yes
6. Still have original remote? Yes
7. Checked the file section? Yes
8. Checked Pronto file section (at R/C)? Yes
9. Partially working setup code? Read below
10. Learning remote question? no

I have built a Sony 12 PIC based analyzer and discovered the raw data.

The raw Ir codes are: Sony 12, Device 2
Button map (hex) are typed on picture below.
Original remote picture is also attached for any other Neuros users.

Is there a setup code that needs to be put in Remotemaster??

Remote


Remote with raw IR codes over the buttons:

[/img]

Ex-Navy wrote:1. Device: Neuros OSD
2. Type of device: PVR ?
3. Year: 2007
4. JP1/UEI Remote model: URC-6820A
5. Do you have a JP1 cable? Yes
6. Still have original remote? Yes
7. Checked the file section? Yes
8. Checked Pronto file section (at R/C)? Yes
9. Partially working setup code? Read below
10. Learning remote question? no

I have built a Sony 12 PIC based analyzer and discovered the raw data.

The raw Ir codes are: Sony 12, Device 2

John pretty much outlined exactly what needs to be done to make an upgrade file for your post here:
https://www.hifi-remote.com/forums/viewtopic.php?t=8041
Didn't that work?

Ex-Navy wrote: Is there a setup code that needs to be put in Remotemaster??

You can use any 4 digit number up 2047 as long as it doesn't interfere with any other codes you are using.

No, did you read my last reply on that original post??

Thank you I now see the 4 digit explanation