JP1 Remotes

i recently bought a second hand hitachi projection TV. How can I tune it up so the colors are true to life. It works, and the screen is the correct size, but it may be a little dull and red.

Andrew

Initially, you might want to try going through the THX setup programs found on many DVDs. Almost anything with a THX logo will have it. You can usually find the logo on a menu screen and it can be hi-lighted. This is a no cost rough setup.

The red tint may be intentional. Do a search for "red push". The THX setup will show whether it is a grayscale or red push issue. Red push will show up when color is present but not on a pure black and white image, which is used for grayscale adjustment.

You might want to dust off the lenses, too. They can be reached by removing the lower rear cabinet cover.

If the basic setup is not sufficient, then you would need to delve into mechanical G2/Screen adjustments and service menus. I would suggest looking through the RPTV section on the AVS forum for more specific suggestions. http://www.avsforum.com/avs-vb/forumdisplay.php?f=63

Personally, I would limit myself to Menu settings and possibly G2/Screen adjustments. Many of the service menu settings are not documented by the factory but the ISF technicians have developed patterns of adjustment for them (and charge several hundred $) You might find this thread interesting too. http://www.avsforum.com/avs-vb/showthread.php?t=695922

I'll try to do the simple menu stuff first like you said. Wish me luck!!!!!

Andrew