JP1 Remotes

When I try and set up for my Panasonic PV7664 VCR, the codes I'm using appear to be be "off" in function. For example when I press "3" button, the number "5" is selected. When I press "8" I get a power toggle.

I've used both KM and RM to generate the files, to the same effect. I have got numerous other devices working without problems. For this VCR I got the codes form Devices4.xls for VCR-1162. That code mostly works correctly when I use that instead of a custom upgrade on the remote. One wrinkle - The Devices4.xls gives hex codes. I converted these to EFCs using various other CCF files etc as a guideline. Sometimes the least sig nibble of the LSB is different between the origianl hex and the EFC translated hex.

Am I missing somehing obvious here?

Thanks,
gny

Particulars:
Remote: URC-9660
Protocol: Panasonic VCR Combo
Device: 144
Subdevice: 0

Some example codes (from RM):
Func EFC Dev SubDev OBC Hex
Num 5 116 144 0 20 d7 00
Num 6 120 144 0 21 57 00
Num 7 118 144 0 22 97 00
Num 8 122 144 0 23 17 00
Num 9 245 144 0 24 e7 00
Ch up 148 144 0 52 d3 00
Ch dwn 152 144 0 53 53 00
Pwr Tog 024 144 0 61 43 00

zapdog wrote:When I try and set up for my Panasonic PV7664 VCR, the codes I'm using appear to be be "off" in function. For example when I press "3" button, the number "5" is selected. When I press "8" I get a power toggle.

This indicates that our software thinks the protocol uses 2 byte hex commands, while the remote thinks the protocol uses 1 byte hex commands. Of course you are talking about a combo protocol which DOES use 2 byte hex commands.

Check to find out exactly what protocol upgrades you have in your eeprom image. Maybe you have a bad copy of one in there.

Post a copy of the device upgrade and protocol upgrade you're using that gives this odd behavior.

I was originally going to attach the files to the post, but I don't see any obvious way to do this.

BTW: Would you prefer KM ot RM files?

Thanks
zapdog

Name:,Panasonic VCR on Kameleon,,,,v8.06,,,,,,,CURRENT DATA
Devices:,Panasonic VCR Combo,144,0,,,,,,,,,
Manual:,,0 = 1-byte,LSB-COMP,88,NO,,,,,,,
Setup:,2023,99 = URC-9960 (OFA Kameleon),03 - VCR,EFC,USE,,,,,,,
URC-9960 (OFA Kameleon) Device Upgrade Code:,,,,,,,,,,,,
Upgrade Code 0 = 27 E7 (VCR/2023),,,,,,,,,,,,
1F 00 BE FE FE E1 BF FB F6 FF 67 00 F7 00 77 00 B7 00 37 00 D7 00 57 00 97 00 17 00 E7 00 D3 00 53 00 43 00 AF 00 FF 00 BF 00 3F 00 9F 00 EF 00 95 00 AF 00 FF 00 BF 00 3F 00 58 00 95 00 73 00 7F 00 58 00 46 00 FC 00 D5 00 50 00,,,,,,,,,,,,
End,,,,,,,,,,,,
,,,,,,,,,,,,
,,,,,,,,,,,,
Protocol Code:,,,,,,,,,,,,
Upgrade Protocol 0 = 00 1F (S3C8+),,,,,,,,,,,,
45 91 42 8B 12 8F 45 08 08 00 DA 00 C6 00 DA 02 7B 90 C9 06 D0 03 54 08 08 37 0E 06 18 05 77 17 19 05 37 0C 06 18 06 77 1E 19 06 08 05 54 06 C0 60 C0 B4 07 C0 09 08 8D 01 46,,,,,,,,,,,,
End,,,,,,,,,,,,
Key Move Code:,,,214,,,,,,,,,
,,,,,,,,,,,,
,,,,,,,,,,,,
,,,,,,,,,,,,
,,,,,,,,,,,,
,,,,,,,,,,,,
,,,,,,,,,,,,
,,,,,,,,,,,,
,,,,,,,,,,,,
,,,,,,,,,,,,
,,,,,,,,,,,,
,,,,,,,,,,,,
,,,,,,,,,,,,
,,,,,,,,,,,,
,,,,,,,,,,,,
,,,,,,,,,,,,
,,,,,,,,,,,,
,,,,,,,,,,,,
,,,,,,,,,,,,
fFunctions,fEFC,fByte2,bButtons,bFunctions,fNotes,Device Combiner,,kFunctions,kBoundDev,kBoundKey,kShift,b$Functions
Num 0,249,,0,00 - num 0,,Protocol ID,Fixed Data,,,,,
Num 1,117,,1,01 - num 1,,,,,,,,
Num 2,121,,2,02 - num 2,,,,,,,,
Num 3,119,,3,03 - num 3,,,,,,,,
Num 4,123,,4,04 - num 4,,,,,,,,
Num 5,116,,5,05 - num 5,,,,,,,,
Num 6,120,,6,06 - num 6,,,,,,,,
Num 7,118,,7,07 - num 7,,,,,,,,
Num 8,122,,8,08 - num 8,,,,,,,,
Num 9,245,,9,09 - num 9,,,,,,,,
Vol up,,,vol up,,,,,,,,,
Vol down,,,vol down,,,,,,,,,
Channel up,148,,mute,,,,,,,,,
Channel down,152,,channel up,10 - channel up,,,,,,,,
Power Toggle,024,,channel down,11 - channel down,,,,,,,,
TV / VCR,150,,power,12 - Power Toggle,,,,,,,,
Last (prev ch),000,,enter,21 - Display / Enter,,,,,,,,
Menu,102,,input,28 - Input,,,,,,,,
Program,185,,last,14 - last (prev ch),,,,,,,,
Arrow - up,055,,menu,15 - menu,,,,,,,,
Arrow - down,181,,guide,16 - Program,,,,,,,,
Arrow - left,183,,up arrow,17 - Arrow - up,,,,,,,,
Arrow - right,187,,down arrow,18 - Arrow - down,,,,,,,,
Display / Enter,208,,left arrow,19 - Arrow - left,,,,,,,,
Transport - Play,055,,right arrow,20 - Arrow - right,,,,,,,,
Transport - Pause,182,,ok,40 - Exit - Learned,,,,,,,,
Transport - Rewind / Search,183,,sleep,,,,,,,,,
Transport - Fast fwd / Search,187,,pip on/off,,,,,,,,,
Transport - stop,181,,info,21 - Display / Enter,,,,,,,,
Transport - record,053,,pip swap,,,,,,,,,
Input,173,,pip move,,,,,,,,,
+100,208,,play,22 - Transport - Play,,,,,,,,
Slow,058,,pause,23 - Transport - Pause,,,,,,,,
Transport - eject,,,rewind,24 - Transport - Rewind / Search,,,,,,,,
Slow+,,,fast fwd,25 - Transport - Fast fwd / Search,,,,,,,,
Slow-,,,stop,26 - Transport - stop,,,,,,,,
Commercial Adv / Zero Search,,,record,27 - Transport - record,,,,,,,,
SAP / Hifi,206,,exit,35 - Add / Delete,,,,,,,,
Speed,055,,surround,,,,,,,,,
Counter Reset,100,,input.,,,,,Add / Delete,,,,
Index,165,,+100,,,,,,,,,
Add / Delete,153,,fav/scan,,,,,,,,,
Shuttle - Slow Fwd,,,device button,,,,,,,,,
Shuttle - Fast,,,skip fwd,38 - 60 Second Skip,,,,,,,,
Tracking+,148,,skip back,33 - Counter Reset,,,,,,,,
Tracking-,152,,live TV,,,,,,,,,
60 Second Skip,144,,replay,,,,,Add / Delete,,,,
Add / Delete,153,,pip freeze,,,,,,,,,
Exit - Learned,102,,slow,,,,,,,,,
,,,eject,,,,,,,,,
,,,slow+,,,,,,,,,
,,,slow-,,,,,,,,,
,,,x2,,,,,,,,,
,,,center,,,,,,,,,
,,,rear,,,,,,,,,
,,,phantom1,,,,,,,,,
,,,phantom2,,,,,,,,,
,,,phantom3,,,,,,,,,
,,,phantom4,,,,,,,,,
,,,phantom5,,,,,,,,,
,,,phantom6,,,,,,,,,
,,,phantom7,,,,,,,,,
,,,phantom8,,,,,,,,,
,,,phantom9,,,,,,,,,
,,,phantom10,,,,,,,,,
,,,setup,,,,,,,,,
,,,light,,,,,,,,,
,,,Home Theater,,,,,,,,,
,,,Macro 1,,,,,,,,,
,,,Macro 2,,,,,,,,,
,,,Macro 3,,,,,,,,,
,,,Macro 4,,,,,,,,,
,,,learn1,,,,,,,,,
,,,learn2,,,,,,,,,
,,,learn3,,,,,,,,,
,,,learn4,,,,,,,,,
,,,,,,,,,,,,
,,,,,,,,,,,,
,,,,,,,,,,,,
,,,,,,,,,,,,
,,,,,,,,,,,,
,,,,,,,,,,,,
,,,,,,,,,,,,
,,,,,,,,,,,,
,,,,,,,,,,,,
,,,,,,,,,,,,
,,,,,,,,,,,,
,,,,,,,,,,,,
,,,,,,,,,,,,
,,,,,,,,,,,,
,,,,,,,,,,,,
,,,,,,,,,,,,
,,,,,,,,,,,,
,,,,,,,,,,,,
,,,,,,,,,,,,
,,,,,,,,,,,,
,,,,,,,,,,,,
,,,,,,,,,,,,
,,,,,,,,,,,,
,,,,,,,,,,,,
,,,,,,,,,,,,
,,,,,,,,,,,,
,,,,,,,,,,,,
,,,,,,,,,,,,
,,,,,,,,,,,,
,,,,,,,,,,,,
,,,,,,,,,,,,
,,,,,,,,,,,,
,,,,,,,,,,,,
,,,,,,,,,,,,
,,,,,,,,,,,,
,,,,,,,,,,,,
,,,,,,,,,,,,
,,,,,,,,,,,,
,,,,,,,,,,,,
,,,,,,,,,,,,
,,,,,,,,,,,,
,,,,,,,,,,,,
,,,,,,,,,,,,
,,,,,,,,,,,,
,,,,,,,,,,,,
,,,,,,,,,,,,
,,,,,,,,,,,,
,,,,,,,,,,,,
,,,,,,,,,,,,
,,,,,,,,,,,,
,,,,,,,,,,,,,
,,,,,,,,,,,,,
,,,,,,,,,,,,,
,,,,,,,,,,,,,
,,,,,,,,,,,,,
,,,,,,,,,,,,,
,,,,,,,,,,,,,
,,,,,,,,,,,,,
,,,,,,,,,,,,,
,,,,,,,,,,,,,
,,,,,,,,,,,,,
,,,,,,,,,,,,,
,,,,,,,,,,,,,
Line Notes:,,,,,,,,,,,,,
,,,,,,,,,,,,,
,,,,,,,,,,,,,
,,,,,,,,,,,,,
,,,,,,,,,,,,,
,,,,,,,,,,,,,
,,,,,,,,,,,,,
,,,,,,,,,,,,,
,,,,,,,,,,,,,
,,,,,,,,,,,,,
,,,,,,,,,,,,,
,,,,,,,,,,,,,
,,,,,,,,,,,,,
,,,,,,,,,,,,,
,,,,,,,,,,,,,
,,,,,,,,,,,,,
,,,,,,,,,,,,,
,,,,,,,,,,,,,
,,,,,,,,,,,,,
,,,,,,,,,,,,,
,,,,,,,,,,,,,
,,,,,,,,,,,,,
,,,,,,,,,,,,,
,,,,,,,,,,,,EOF Marker - DO NOT DELETE,

zapdog wrote:I was originally going to attach the files to the post, but I don't see any obvious way to do this.

There isn't a way to attach files in the forum. Normally, we like to have the files uploaded to the Diagnosis Area. However, using KM's Import feature, I can load the file from your post above.

I copied and pasted it into IR and everything appears to line up correctly on the Devices tab (i.e. the hex codes on KM's Functions sheet match the corresponding entries on the buttons in IR's Devices tab Key Map window.

Can you confirm that the same is true on your end?

I guess I asked unclearly, but I was looking for just the small chunks of text that you copy from KM (or RM) to IR. Those are of course included in that full KM file above. At first glance they look right to me and I assume Mark checked a little more than first glance.

What about the contents on the protocols tab in IR? Did you remember to copy the above protocol upgrade from KM to IR? What other protocol upgrades were already there? Maybe it's best to post a saved file from IR to the diagnosis folder.

johnsfine wrote:At first glance they look right to me and I assume Mark checked a little more than first glance.

I might have given it 2 glances! Actually, I just did the copy & paste into IR and checked that the codes were assigned to the correct buttons.

Did you remember to copy the above protocol upgrade from KM to IR?

A protocol upgrade isn't required with this device upgrade.

I posted the file named: urc9962_2003-12-30_a.txt.

This contains 4 device upgrades, one of which required a protocol to be added (I think the "AUDIO" off hand).

I looked a the Devices tab of IR, and the EFCs for the VCR all list "* (use hex)" after the EFC code. The EFC codes themselves appear correct, as does the hex code.

I'll mention this again - the hex codes don't match the ones in Devices4.xls exactly. For example Menu = 95 40 there, but in the IR program and the KM it is "95 00". This is true for about 10 or so keys.

Thanks for your efforts on this!

Paste this protocol code into IR's Protocols tab and see if the VCR upgrade works correctly.

Upgrade Protocol 0 = 00 1F (S3C8+)
45 91 42 8B 12 8F 45 08 08 00 DA 00 C6 00 DA 02
7B 90 C9 06 D0 03 54 08 08 37 0E 06 18 05 77 17
19 05 37 0C 06 18 06 77 1E 19 06 08 05 54 06 C0
60 C0 B4 07 C0 09 08 8D 01 46
End

zapdog wrote:I'll mention this again - the hex codes don't match the ones in Devices4.xls exactly. For example Menu = 95 40 there, but in the IR program and the KM it is "95 00". This is true for about 10 or so keys.

In addition to the protocol code above, on those functions that devices4 shows as "xx 40", set the byte2 in KM to "2", and then recopy the upgrade code to IR.

Party here - I will try your stuff tonight or tomorrow. Thanks!!!!

Q: If the hex nibble is 4, why enter 2?

zapdog wrote:If the hex nibble is 4, why enter 2?

Those signals are actually using Device/Sub-Device 144.1, while the others use 144.0. The byte2 rules for Panasonic VCR Combo in KM are "Set 'byte2' = '0' for 144.0, '1' for 128.0, '2' for 144.1, '3' for 128.1", which is why you need to use "2".

In RM, you actually specify the Device and Sub-Device on the Functions tab, in which case you enter "144" as the Device, and "0" or "1" as appropriate for the Sub-Device.