Help Me With URC-39930RJ0-03 "Dreambox"

[zubair4148]

Hello I Have This URC-39930RJ0-03 Remote And It's Not Working On Dreambox but the With TV Code It Works Great. For Dreambox None Light Blinks While Pressing Keys.

I Made Jp1.2 interface Using This Guide Building a JP1.x Interface On This Site As It Is Tried Both 1.1 And 1.2 Connections And Cant Connect to the remote.

Tried JP1xTEST And Getting
**** NO JP1.x COMPATIBLE REMOTE FOUND! ****

please someone help me.

[Capn Trips]

I recommend you read THIS POST and use the referenced troubleshooting guide.

[zubair4148]

I Checked All It's From My Comport "DTR" Problem

Have To Try On Other PC.

[zubair4148]

I Have A Remote For Dreambox

On The Back Of Remote Cover It's Printed

URC-39930BJ0-03


On The Board It's Printed

BV Olivic S08 2004 2-Mode Omega
URC-39930BJ0-XX
UEIS-10875 Rev: 01

39710-003-0001
REV: 01

[The Robman]

It's a JP1.2 remote...
https://www.hifi-remote.com/forums/viewtopic.php?t=8270
https://www.hifi-remote.com/forums/viewtopic.php?t=8261

[zubair4148]

Finaly I Have Done It.

[zubair4148]

Thanks For The Help I Got From This Forum.

Here Is My JP1.2 SMD Version



If Any One Needs Help I Will Be Here.

[Wolf123]

zubair4148
Good morning.
I have a "Dreambox DM600PVR" with the new DREAM Universal Remote-Contoller URC-39930RJ0-03
And my TV is a "Medion-MD 21032" therefor is no Code in the Remote.
I think no problem it gives IR.exe and so on, and make me a JP1 interface... Nothing (no contact).
Look anyway to the internet and found it gives more then JP1 eg. JP1.x ahhh... that is it...
Make me a JP1.x interface, start IR.exe 703, but also nothing...
Load "JP1xTEST.exe" programm from Tommy Tyler and check the interface, all OK.

Fount A JP1.X COMPATIBLE REMOTE ON COM1!
Signature is 10381038
Memory Adress is $E000
Memory size is $1C00 (7168)

Now my question:
if i start IR.exe and check interface it write:
"Failed to open JP1.x interface".

Sometimes it write:
"Found JP1.x succest"

But if i then press "Download from Remote" it write:
"Failed to open JP1.x interface" or sometimes it write: "Read failed -1"

I have no idea what is wrong...

Have some one connect to this Remote-Controller an now what is my problem.

Regards
Wolfgang from Berlin (Germany)

[Wolf123]

Hello Users,
i think i found the problem..
I build a hombrew JP1.x Interface by Tommy Tyler with Transistors.
On an other Computer the interface works now with IR.exe 703.
On a Dell-Laptop it works not.
I think it is better to take a MAX232 for TX and RX because the Data ar quicker from high to low.

Wolfgang

[The Robman]

Congratulations Wolfgang. Could you explain the following line please, as I don't understand it.

I think it is better to take a MAX232 for TX and RX because the Data ar quicker from high to low.