JP1 Remotes

Ive modified 5 RCA RCU 810s with the JP! connector and have good luck playing around with some programming. I've recently acquired a Panasonic Showstopper PV-HS2000 and somehow hosed the Panasonic remote when I plugged the JP1 cable in backwards. It appears to be working but it no longer controls the show stopper. 2 Questions:

1. Can someone suggest how i might restore the panasonic remote?

2. Can someone point me to a link for the showstopper codes to upgrade my RCA remotes? 8)

The Showstopper is really a "ReplayTV" box and you'll find the codes for ReplayTV in the PVR folder in the file section.

As for the Showstopper remote, take a look in the battery compartment and tell me if you see one of the following ids on the sticker...

1) 3401B02 or G004201
2) 3401W01 or 3402W01

Why did you post this in the Non-JP1 folder as this sure sounds like a JP1 question.

You're right, it is a JP1 question. I wasn't familiar with the forum & posted it by mistake in the wrong area

There are 2 stickers in the battery compartment. One reads 3401B02 (White) and the second reads G001303 (Green)

Thanks for the link to the files section

You have a "version 1" remote. Try loading the following file into your ReplayTV remote to see if it gets it working...

https://www.hifi-remote.com/forums/dload ... le_id=4438

:Thanks: That did the trick. My RCU810's now control my showstopper and the code you szent me fixed the Panasonic remote