Page 1 of 1
Konka K2001UM 20" TV
Posted: Fri Feb 09, 2007 1:00 pm
by fpreston
Learned remote keys for Konka K2001UM 20" TV. Used a blanked URC-8820 and saved via IR.exe version 7 beta2 and beta3. Note that learning remote keys caused input of device codes for some reason, and changed (I think) as more learned keys were added. Also, included scanned image or remote.
May need a special protocol to make a device file from this??? Please help.
https://www.hifi-remote.com/forums/dload ... le_id=4204
Fred
Posted: Fri Feb 09, 2007 1:18 pm
by johnsfine
In a couple other threads, Rob provided a custom upgrade for this code set.
Hopefully he has a JP1.2 version of that.
In
this post Mike said "Added support for PID 019B as Konka". I assume that is the PID Rob created for that.
Sorry I haven't had time yet to add this one to DecodeIR.
Posted: Fri Feb 09, 2007 3:20 pm
by The Robman
I already answered your other post on this over at R/C...
http://www.remotecentral.com/cgi-bin/mb ... d.cgi?4188
Konka protocol works - working on key mapping
Posted: Sat Feb 10, 2007 10:34 am
by fpreston
Thanks Rob. That seems to have done the trick. Some of the key assignments/names are different for the Konka K2001UM, but this is pretty easy to fix. I will post it when done.
Questions:
1. Is there an easy way to map the learned codes I provided on the K2001UM to their OBC in your Konka protocol? (I am having difficulty finding the correct OBC for a couple of the buttons).
2. The URC6690 has two "input" buttons listed (in KM 9.07). Can the duplicate be deleted?
Re: Konka protocol works - working on key mapping
Posted: Sat Feb 10, 2007 11:42 am
by mr_d_p_gumby
fpreston wrote:2. The URC6690 has two "input" buttons listed (in KM 9.07). Can the duplicate be deleted?
The second "input" button listed on row 42 of the Buttons sheet should be grayed out. This is a bug in KM. (If you assign a function to this button, no output is generated because the button does not exist on the URC6690.) It will be fixed in the next KM release.
Posted: Sat Feb 10, 2007 11:47 am
by mr_d_p_gumby
johnsfine wrote:In
this post Mike said "Added support for PID 019B as Konka". I assume that is the PID Rob created for that.
KM v9.07 has support for PID 019B for S3C8 & HCS08 remotes. Both are offical UEI executors.
Re: Konka protocol works - working on key mapping
Posted: Sat Feb 10, 2007 12:03 pm
by binky123
fpreston wrote:Thanks Rob. That seems to have done the trick. Some of the key assignments/names are different for the Konka K2001UM, but this is pretty easy to fix. I will post it when done.
Questions:
1. Is there an easy way to map the learned codes I provided on the K2001UM to their OBC in your Konka protocol? (I am having difficulty finding the correct OBC for a couple of the buttons).
You'll have to convert the raw burst timings into a hex number. In IR7, select the Advanced Tab and click on Forced Learned Timings to enable the Raw Signals panel. Use the scroll bar to scroll to the timings. Cut-n-paste into an editor so you can convert the timing pairs.
I looked at your learned signals and the hex codes in the upgrade and it seems straightforward to convert.
Code: Select all
Power = 0Bh
+2940 -2940; +490 -1470; +490 -1470; +490 -1470; +490 -1470; 0000
+490 -1470; +490 -1470; +490 -2450; +490 -1470; 0010
+490 -1470; +490 -1470; +490 -1470; +490 -1470; 0000
+490 -2450; +490 -1470; +490 -2450; +490 -2450; 1011
+490 -3920; +490 -23030;
Menu = 15h
+2940 -2940; +490 -1470; +490 -1470; +490 -1470; +490 -1470; 0000
+490 -1470; +490 -1470; +490 -2450; +490 -1470; 0010
+490 -1470; +490 -1470; +490 -1470; +490 -2450; 0001
+490 -1470; +490 -2450; +490 -1470; +490 -2450; 0101
+490 -3920; +490 -23030;
Input = 0Fh
+2940 -2940 +490 -1470 +490 -1470 +490 -1470 +490 -1470 ;
+490 -1470 +490 -1470 +490 -2450 +490 -1470 ;
+490 -1470 +490 -1470 +490 -1470 +490 -1470 ; 0000
+490 -2450 +490 -2450 +490 -2450 +490 -2450 ; 1111
+490 -3920 +490 -23030
CC{Shows}/Code = 1Eh
+2940 -2940 +490 -1470 +490 -1470 +490 -1470 +490 -1470
+490 -1470 +490 -1470 +490 -2450 +490 -1470
+490 -1470 +490 -1470 +490 -1470 +490 -2450 ; 0001
+490 -2450 +490 -2450 +490 -2450 +490 -1470 ; 1110
+490 -3920 +490 -23030
Posted: Sat Feb 10, 2007 1:33 pm
by The Robman
Here are the OBCs for the learned buttons in your IR file...
11 - power
01 - 1
02 - 2
03 - 3
04 - 4
05 - 5
06 - 6
07 - 7
08 - 8
09 - 9
00 - 0
17 - Up/CH+
18 - Left/VOL-
19 - Right/VOL+
21 - OK/Menu
16 - Down/CH-
15 - TV/AV
30 - Code
10 - sleep Timer
14 - Display
31 - Picture
23 - Q.View
20 - MUTE
12 - Unmarked