Page 1 of 1
airboard sk7100 + urc9800 in km =protocol id error help!!!
Posted: Tue Jan 16, 2007 4:22 pm
by ryanmc
im trying to use the device upgrade for the airboard sk7100 when i load it in km its fine but then when i change the remote to urc9800 it says "protocol id error enter valid protocol id" and invalid protocol id.
the link for the upgrade is
https://www.hifi-remote.com/forums/dload ... le_id=1425
what do i need to do i dont know alot about protocol
thanks Ryan
Posted: Tue Jan 16, 2007 5:11 pm
by Mark Pierson
The 9800 uses the older "P8/740" processor and that upgrade file only contains code for the newer "S3C8+" processor. Unless one of the 740 experts can convert that custom protocol for you, you won't be able to use that upgrade unfortunately.
Posted: Tue Jan 16, 2007 5:58 pm
by The Robman
The trouble with this particular upgrade file is that it contains a homemade custom protocol and the author only created a version for the S3C8 remotes (which covers the vast majority of JP1 remotes).
Somebody would have to create another custom protocol for the Mits/740 remotes in order for you to be able to use this upgrade with your URC-9800 remote, and I don't know how likely that is going to happen as we only have one Mits/740 expert (and it's not me!
)
Posted: Tue Jan 16, 2007 9:11 pm
by ryanmc
is this file any easier ?
Posted: Tue Jan 16, 2007 9:57 pm
by The Robman
ryanmc wrote:is this file any easier ?
Er, say what?
Posted: Wed Jan 17, 2007 3:56 pm
by ryanmc
hahahaha sorry i didnt link file
https://www.hifi-remote.com/forums/dload ... ile_id=303
its not a combo or whatever that first one is
Posted: Wed Jan 17, 2007 4:16 pm
by Mark Pierson
That file's got the same problem... it uses a custom protocol for the newer processors and would need to be re-written for your 9800.
Posted: Wed Jan 31, 2007 2:28 pm
by MrD
I'm having the exact same problem, except I have a URC-8820.
I'm assuming though that it's the same problem - this was designed for the SC38 and my 8820 is actually a HCS08?