JP1 Remotes

The latest version of KM (v9.06) is available.

Changes include:

• Added 'GI 4DTV Hacked' & 'Pioneer 4DEV' hacked protocols for HCS08 remotes.
• Corrected EFC-to-OBC problem with Zenith protocol (PID 0022).
• Modified byte2 of Sharp DVD (PID 00F8) to include device & subdevice in XOR checksum and add byte2 input for extended commands; also corrected fixed data errors on Fujitsu & Sharp DVD; added OEM parameters to Fujitsu; updated RC16/18 & SST pcode.
• Corrected TeacK checksum primer to use upper 4 bits of 1st fixed byte.
• Corrected 2nd cmd byte calculation when using Panasonic MIX combo to emulate Panasonic VCR combo.
• Corrected fixed data for Pioneer DVD2 when using variant 3 of 007E protocol.
• Corrected byte2 processing in EFC3 mode for PIDs 005F & 006A.
• Added b2/ov decodes for PIDs 0000, 001F, 005F, 006A, 0073, 009C, 00B6, 00CD, 00E8, 00F2, 00F8 & hacked Pioneer 4DEV, Denon Combo, Panasonic Combo2.
• Added support for versions of PID 0098 JVC Combo/Euro.
• Added URC-8206 remote.
• Corrected 'fNo' problem in saved KM files.
• Added error indication if byte2 option not set correctly when using third-party protocols.
• Updated DigitMap entries 360-362.
• Added Nokia32 (0173) protocol.

(Thanks to Mark for testing and moral support!)

Mike-
I just installed Office 2007, enabled the analysis pak addin and I now get the error below when trying to execute KM. It was working fine under Excel 2003.

"The Microsoft Excel Analysis Toolpak is either not installed or is not compatible with this version of keymap-master."

I checked the MS knowledgebase and it says that all the functions that used to be part of the addin are now native in 2007. (e.g. HEX2DEC) Could this be the problem?

gnm313 wrote:Could this be the problem?

See my reply here.

mr_d_p_gumby wrote:The latest version of KM (v9.06) is available.

Changes include:

• Added 'GI 4DTV Hacked' & 'Pioneer 4DEV' hacked protocols for HCS08 remotes.
• Corrected EFC-to-OBC problem with Zenith protocol (PID 0022).
• Modified byte2 of Sharp DVD (PID 00F8) to include device & subdevice in XOR checksum and add byte2 input for extended commands; also corrected fixed data errors on Fujitsu & Sharp DVD; added OEM parameters to Fujitsu; updated RC16/18 & SST pcode.
• Corrected TeacK checksum primer to use upper 4 bits of 1st fixed byte.
• Corrected 2nd cmd byte calculation when using Panasonic MIX combo to emulate Panasonic VCR combo.
• Corrected fixed data for Pioneer DVD2 when using variant 3 of 007E protocol.
• Corrected byte2 processing in EFC3 mode for PIDs 005F & 006A.
• Added b2/ov decodes for PIDs 0000, 001F, 005F, 006A, 0073, 009C, 00B6, 00CD, 00E8, 00F2, 00F8 & hacked Pioneer 4DEV, Denon Combo, Panasonic Combo2.
  
• Added support for versions of PID 0098 JVC Combo/Euro.
• Added URC-8206 remote.
• Corrected 'fNo' problem in saved KM files.
• Added error indication if byte2 option not set correctly when using third-party protocols.
• Updated DigitMap entries 360-362.
• Added Nokia32 (0173) protocol.

(Thanks to Mark for testing and moral support!)

Mike,

I just sort of randomly noticed that the JVC Combo protocol doesn't work. Regardless of what remote I select, when I select JVC Combo protocol, the Protocol upgrade field (and all of the calculated EFC/OBC fields) give the dreaded #VALUE! error!

Steve

Capn Trips wrote:I just sort of randomly noticed that the JVC Combo protocol doesn't work. Regardless of what remote I select, when I select JVC Combo protocol, the Protocol upgrade field (and all of the calculated EFC/OBC fields) give the dreaded #VALUE! error!

Thanks. It will be fixed in the next release.