JP1 Remotes

The latest version of KM (v8.20) is available.

Changes include:

• Added new and improved 'GI 4DTV Hacked' $00A4 protocol.
• Added 'Pioneer 4DEV' $01D0 hacked protocol
• Fixed calculation error in Max Key Move Bytes logic.
• Fixed OBC/ov problem when using [Swap] button.
• Miscellaneous UI changes.

You'll have to excuse me if I'm missing some release info, but if you try to setup for VideoACC or Cable on a 2117 remote for example, Combined Keymove Code cannot be enabled. This is a change from KM 8.19 The other key layouts seem to work OK--although I haven't done much testing.

streetskater wrote:Combined Keymove Code cannot be enabled.

Unless I don't understand your problem, 8.20 is working properly. I just tested and am able to get combined key moves using Cable and Video Acc modes.

Combined Keymove Code is enabled by default. The [ ] DISABLE Combined Key Move Code checkbox is only user-selectable IF there are any combined key moves defined. If there's none, then the checkbox itself is disabled.

Turns out not to be a big problem. If you save the file and reload it, it works. Try this file from the JP1 Diagnosis Area:
Panasonic VCR PV-8451.txt
On my system, when I first load it into KM 8.20 Keymove isn't working. If I save it--then Keymove works. If I load it into earlier versions of KM it works from the first load.

That's still part of the bug I thought I fixed in 8.20 (Fixed calculation error in Max Key Move Bytes logic). I think I know what's wrong and will correct it for the next release.

For now, all you have to do is go to the Key Moves sheet and enter '205' in the Max Key Move Bytes cell (or do the save as you discovered).

Also, be sure to read the sticky thread about posting links to Yahoo files (I fixed your link above).