JP1 Remotes

Hi,

I'm using the Sharp/Denon-K protocol ($01 $C8) with the 4 devices below:

K4.1 , K4.3, K4.5, K4.7

Fixed data are : 2A 4C 28 2C 2A 2E EA 00
I get the device code by using the 3 bits values below:

000 = 0 selects 28 = K4.1
001 = 1 selects 2C = K4.3
011 = 3 selects 2A = K4.5
100 = 4 selects 2E = K4.7

I need to use a 5th device, and select 4C for using K2.3

How I can do this ?


Thanks,

Use RemoteMaster after adding this protocols.ini entry.

Thanks,
It works fine.