JP1 Remotes

I thought I had learned all the tricks about programming Yamaha boxes after developing a complete load for my new RX765 Yamaha box, but then someone asked me to do the same for their V2700. I stand very corrected!

1. Device: Yamaha RX-V2700
2. Type of device: Audio
3. Year: Unknown - probably 5 years old
4. JP1/UEI Remote model: Atlas/Rogers 1055 and RCA Learning Remote
5. Do you have a JP1 cable? Yes
6. Still have original remote? See note below
7. Checked the file section? Yes
8. Checked Pronto file section (at R/C)? Yes
9. Partially working setup code? Very little
10. Learning remote question?
11. Have you tried the JP1 Lookup Tool? Yes

This box uses a RAV362 remote (not working) or a RAV25 remote (a very small subset of the RAC362). With my learning remote I was able to get some of the codes off the RAV25 and then proceeded to check all of the Yamaha files to find a match for those functions. Not a single file in the files section for Yamaha had any matches!

I had thought that Rob published a file some time ago with all the Yamaha codes but I couldn't find it.

This Yamaha box seems to use devices 124/126 based on the learned codes from the working remote.

The issue is that the small RAV25 remote has none of the codes that I need - specifically selecting Scene or HDMI inputs.

There used to be a site in the UK that had all the Yamaha codes but that site seems to have disapeared.

I am quite capable of creating a complete RM load (which I will post once completed) but I am looking for anyone with suggestions on where I might find some of the codes for the V2700 which seems so different from all other Yamaha boxes. And yes, of course, I did look at the V2500 already, but nothing is even close!

Any suggestions?

I believe the Yamaha Master IR Collection has the RX-V2700.

The collection has components designed in 2008 or before.

However, I think that you'll find the devices are 122 and 126, and many functions are the same as other Yamaha receivers. Probably your friend has his receiver set up for ID2.

Thanks so much 3FG. That Yamaha file is exactly what I have been looking for. If it is not proprietary, should it not be posted in this forum, or at least a link to it?

I sure wish I had that file when doing the RX765!

How can I change the receiver to a different ID if it is set for ID2. Unfortunately I do not have the manual for the box.

Again, thanks so much for that Yamaha doc - it is worth its weight in gold.

Well, using Google......
RX-V2700 manual

I have saved a copy here:
https://www.hifi-remote.com/forums/dload ... le_id=9582