Page 1 of 1
RCA RCRP05B Universal Remote Control
Posted: Fri Oct 01, 2010 9:17 am
by alkap
I just got this remote with JP1.3 cable and am struggling with enabling phantom devices (4,5 and 6). Can someone help me with step by step how to do it?
Many thanks
Dvijen
Posted: Fri Oct 01, 2010 9:33 am
by mdavej
To use dev4, make a macro with dev4 as the only step. The button you assign the macro to will activate that device mode. I like to use shifted device buttons for that purpose, but any buttons will work.
Posted: Fri Oct 01, 2010 10:09 am
by vickyg2003
As Dave said, the phantom devices are activated via macro.
On this remote, the phantom devices also use phantom LEDs. So consequently when you are in phantom mode, the LED's don't light up.
If you feel up to it, you can install
this device/protocol and press the CH+ to use real LED's.
If you find the instructions too vague please let me know, so that I can clarify them.
Posted: Fri Oct 01, 2010 3:50 pm
by alkap
Thanks, the devices are working now.
Having a little difficulty with LED's but I am working on it.
Thanks again for helping me out
Posted: Fri Oct 01, 2010 5:10 pm
by vickyg2003
alkap wrote:
Having a little difficulty with LED's but I am working on it.
What kind of difficulty?
Posted: Mon Oct 04, 2010 5:57 am
by alkap
vickyg2003 wrote:alkap wrote:
Having a little difficulty with LED's but I am working on it.
What kind of difficulty?
Well, looks like when I press SETUP button, the LED lights up at random, but does not light up when I select actual device button. I did not put much effort in it since it is not terribly important to me, however, if you have step by step on it, I will appreciate it.
Posted: Mon Oct 04, 2010 7:04 am
by vickyg2003
Did you read these instructions?
https://www.hifi-remote.com/forums/dload ... le_id=8994
If you follow that procedure the phantom devices will light up these keys
dev4 will light the DVD/VCR LED
dev5 will light the CBL/SAT LED
dev6 will light the DVR/AUX LED
Copy this device, everything from the word Upgrade through the word End
and paste it into the IR Device Tab.
Code: Select all
Upgrade Code2 0 = 14 54 (TV/1108) CH+ Activate phantom LEDs
01 FF 00 21 01 00
End
Copy this protocol and paste it into the Protocol Tab
Code: Select all
Upgrade protocol 0 = 01 FF (S3C8+) RCA RCRP05B LED PATCH (PB v4.01)
00 00 01 C6 CC 42 D5 C6 BE 00 03 C6 CA FF 1B A6
03 00 EB 04 C6 CA FF 1E 8D FF 21 02 04 80 10 20
40 B0 C6 78 CD 56 C7 7F 56 CD 80 C4 CC C0 C6 C2
FE 80 C6 C4 00 80 F6 04 4C C4 CA C0 C4 C6 C2 06
C3 80 16 C2 FE C4 BE C4 C4 C2 C6 04 BF C7 14 BE
C6 26 C7 00 36 C6 00 5B 18 EB 04 42 77 6B 12 C4
BE C4 22 57 32 46 F6 FF 71 C4 C0 CA C4 C6 BE 8B
B0 F6 04 4C F6 48 B2 C6 BE 00 80 C6 CA FE 80 8D
48 C6
End
Then assign TV/1108 to a button
Press Ch+
This is a one time deal. You can and should remove the device and protocol from your IR file,
Anytime you use phantom dev 5, the Cbl/Sat will now light.
Posted: Thu Feb 09, 2017 8:20 pm
by TK978
Any chance you could post step by step instructions on the Phantom LEDs...read everything just don't know where to put the supplied upgrade and protocol
Thanks
Posted: Thu Feb 09, 2017 9:53 pm
by The Robman
These instructions were written for
IR.exe rather than RMIR, as that was the program in use at the time. We would probably need to reconfigure things a bit to have something that you could use with RMIR, so for now, you should use IR.exe to load the upgrade until someone creates an RMDU file for it.
Posted: Thu Feb 09, 2017 10:15 pm
by mdavej
Open RM, select your remote model on the first tab, pick Advanced menu, then Import Raw Upgrade, copy paste code from post.
Posted: Fri Feb 10, 2017 11:42 am
by The Robman
Posted: Fri Feb 10, 2017 12:34 pm
by TK978
So I assume I assign your posted RM file to a device key....could it be one of the Phantom Device Keys? Thanks for all your help by the way
Posted: Fri Feb 10, 2017 12:44 pm
by mdavej
Assign to TV or some other real device button and follow the instructions in the file Vicky linked. Then you can remove the upgrade and assign your original device code.
Posted: Fri Feb 10, 2017 12:55 pm
by The Robman
here are the instructions:
USE AT YOUR OWN RISK.
FOR USE WITH THE RCA-RCRP05B with signature 31793179 ONLY.
As a precaution use fresh batteries when activating the phantom LEDs.
Add the upgrade and protocol shown below. Assign it to a device button and then press Ch+ to activate the Phantom LEDs. Ch- will turn off the Phantom LEDs.
This patch only needs to be applied once. You can remove the device and protocol from your RMIR file.
dev4 will light the DVD/VCR LED
dev5 will light the CBL/SAT LED
dev6 will light the DVR/AUX LED
The change will persist through E2 changes, battery changes, even factory resets.
To undo the change reload the Device and protocol and press Ch-.
So, bottom line, if you load this upgrade and assign it to the TV device button, then press CH+, you will have activated the Phantom LEDs. At that point you can delete the upgrade and re-program your original TV code.
Posted: Fri Feb 10, 2017 1:29 pm
by TK978
Perfect ...Thanks