JP1 Remotes

I've built and released RemoteMaster v1.99b

Changes for v1.99b

• Add support for warnings etc. below table without hiding the buttons, move device upgrade bug warning back down (Graham)
• Fixed null pointer exception caused by absence of FavKey entry in RDF (Graham)

See the v1.99 announcement for the full list of changes since v1.98

Available downloads are:

• RemoteMaster.v1.99b.zip - (~2.0MB) Multi-platform Java program, works on Windows, Linux, Mac, etc..
  • Requires a Java 1.6 or newer runtime environment.
  • Please read and follow the installation instructions
• RemoteMaster.v1.99b.exe - ( ~11.4MB) Windows standalone application
  • Compiled, packaged, and powered by Excelsior JET.
  • You must follow steps 4 and 5 of the installation instructions

Links:
The RemoteMaster project home page, now accepting donations.
RemoteMaster.v1.99b.zip
RemoteMaster.v1.99b.exe - See note below.
Change Log (also included in the downloadable files)
Readme.html (also included in the downloadable files)
Tutorial (also included in the downloadable files)

Notes:

• The stand-alone Windows version is compiled and packaged with Excelsior JET.
• Don't forget to follow steps 4 and 5 of the installation instructions.

v1.99a replaced with v1.99b.

I just downloaded 1.99b version, ran the .vbs script to setup, ran RM. I think that's how it's done.
Then I wanted to use an upgrade which uses XMP protocol which might be in more recent RDFs than my 1.28. Yes, I will update to 1.30.
Anyway, I'll find my way around , but I thought I mention that I cannot under these conditions close RM using the windows X nor File/Exit.
I killed javaw.exe in Process Explorer, so this post is just FYI.
Error log twice says "KeyMapMaster.windowClosing() caught an exception!"

Edited: the file I was trying to open was this
https://www.hifi-remote.com/forums/dload ... le_id=8212

Edit#2: Well, I downloaded v1.30 RDFs and Maps and images v1.30 and RM protocols list does not have that XMP protocol.
And close and exit do not work.
I tried reading the protocols.ini but there are no carriage returns in the file making it nearly impossible to wade through.
ARRRGGGHHH

This is the error about the protocol I forgot to include earlier

Opening S:\JP1\RM-upgrades\Thomson DTA DCI1101.rmdu, last modified 8/13/10 8:26 AM
Setting devParms[ 0 ](Device) to null
Setting devParms[ 1 ](Sub Device) to null
Setting devParms[ 0 ](Device) to null
Setting devParms[ 1 ](Sub Device) to null
Searching for remote with name Comcast-URC-1067
ProtocolManager.findNearestProtocol( Comcast-URC-1067, XMP (JP1), 01 6C, JP1
Found protocol null

ElizabethD wrote:
Edit#2: Well, I downloaded v1.30 RDFs and Maps and images v1.30 and RM protocols list does not have that XMP protocol.
And close and exit do not work.
I tried reading the protocols.ini but there are no carriage returns in the file making it nearly impossible to wade through.
ARRRGGGHHH

If you open protocols.ini in wordpad, it should be easy to read, as wordpad understands the unix "line feed only" line ends.

A.A.

seems to me, the last time I needed to use an XMP protocol, it wasn't in the ini file, so I downloaded the protocols.ini file from the Tools->Main folder.