JP1 Remotes

My apologies for asking what surely has been asked a thousand times before, but how do you convert a Philips Pronto hex code into something you can use with JP1? I did search here for the answer before asking, but couldn't find it. Anyway, this page at Remotecentral.com has the discrete PowerON, PowerOFF codes for the ReplayTV 5000 series. I need to get them into my JP1 remote, but can't remember where to copy/paste the hex.

POWER OFF
0000 0072 0000 001c 0060 0020 0010 0010 0010 0010 0010 0020 0010 0020 0020 0010 0010 0010 0010 0010 0010 0010 0010 0010 0010 0010 0010 0010 0020 0020 0010 0010 0010 0010 0010 0010 0010 0010 0010 0010 0010 0010 0010 0010 0010 0010 0010 0010 0010 0010 0010 0010 0020 0010 0010 0010 0010 0020 0010 0f64

POWER ON
0000 0072 0000 001b 0060 0020 0010 0010 0010 0010 0010 0020 0010 0020 0020 0010 0010 0010 0010 0010 0010 0010 0010 0010 0010 0010 0010 0010 0020 0020 0010 0010 0010 0010 0010 0010 0010 0010 0010 0010 0010 0010 0010 0010 0010 0010 0010 0010 0010 0010 0010 0010 0020 0010 0010 0020 0020 0f64

gstrickland wrote:My apologies for asking what surely has been asked a thousand times before, but how do you convert a Philips Pronto hex code into something you can use with JP1?

You download IRTool from the files->tools->programs section.

Make sure you install this in a folder containing DecodeIR.

POWER OFF
0000 0072 0000 001c 0060 0020 0010 0010 0010 0010 0010 0020 0010 0020 0020 0010 0010 0010 0010 0010 0010 0010 0010 0010 0010 0010 0010 0010 0020 0020 0010 0010 0010 0010 0010 0010 0010 0010 0010 0010 0010 0010 0010 0010 0010 0010 0010 0010 0010 0010 0010 0010 0020 0010 0010 0010 0010 0020 0010 0f64

You paste this code into IRTool and out pops
Replay Device 1, OBC 14, EFC 66

POWER ON
0000 0072 0000 001b 0060 0020 0010 0010 0010 0010 0010 0020 0010 0020 0020 0010 0010 0010 0010 0010 0010 0010 0010 0010 0010 0010 0010 0010 0020 0020 0010 0010 0010 0010 0010 0010 0010 0010 0010 0010 0010 0010 0010 0010 0010 0010 0010 0010 0010 0010 0010 0010 0020 0010 0010 0020 0020 0f64

When you repeat the information with this device you get
Replay Device 1, OBC 13, EFC 42

Then if you already have a device in your remote that shoots Replay Device 1 type signals, you can use these EFC's for keymoves.

However, some of the Replay Remotes don't support keymoves.

Edit: Oops, I see you want to control a Replay 5000, not that the Replay 5000 was your JP1 remote.

Just FYI, those discrete codes (and a few others) are included in our ReplayTV upgrade:
https://www.hifi-remote.com/forums/dload ... ile_id=776