JP1 Remotes

Forum for JP1 remotes
https://hifi-remote.com/forums/

RM on Mac

https://hifi-remote.com/forums/viewtopic.php?t=1196

Page 1 of 1

RM on Mac

Posted: Thu Jan 22, 2004 8:42 am
by bsoplinger
I'm using Java 1.4.1 on OS X 10.2.8 and am trying to use RM. It starts up and runs fine. I can import a rdmu file just fine. However, any KM file I attempt to import shows no functions, ie it seems like the import didn't work.

Posted: Thu Jan 22, 2004 8:59 am
by Mark Pierson
You might see that when RM's protocols.ini doesn't contain the protocol settings. You can check the rmaster.err file to see if it offers any clues.

Posted: Thu Jan 22, 2004 9:03 am
by gfb107
Which KM upgrade are you trying to import? It could be that the it uses a protocol that RM doesn't yet support.

Posted: Thu Jan 22, 2004 9:08 am
by bsoplinger
I got these from the Yahoo files section, they're ones I use in my remote: Onkyo_TX-SR601_RCVR-1135.txt ReplayTV-8811.txt

Here's a snippet of the file, I do have the whole thing saved just in case it'd be helpful. This is the .err file from only starting RM, trying to import, clicking the tab to see the remote and quitting:

DeviceUpgrade.importFile()
Searching for slashes in URC-881x / 801x / 601x
slash=9
Got a multi-model remote to import: URC-881x / 801x / 601x
Added subName URC-881x
Added subName 801x
Added subName 601x
Imported protocol id is 01 45
java.lang.NullPointerException
at com.hifiremote.jp1.ProtocolManager.findNearestProtocol(ProtocolManager.java:238)
at com.hifiremote.jp1.DeviceUpgrade.importFile(DeviceUpgrade.java:849)
at com.hifiremote.jp1.KeyMapMaster.importFile(KeyMapMaster.java:858)
at com.hifiremote.jp1.KeyMapMaster.actionPerformed(KeyMapMaster.java:728)
at javax.swing.AbstractButton.fireActionPerformed(AbstractButton.java:1797)
at javax.swing.AbstractButton$ForwardActionEvents.actionPerformed(AbstractButton.java:1850)
at javax.swing.DefaultButtonModel.fireActionPerformed(DefaultButtonModel.java:419)
at javax.swing.DefaultButtonModel.setPressed(DefaultButtonModel.java:257)
at javax.swing.AbstractButton.doClick(AbstractButton.java:321)
at javax.swing.plaf.basic.BasicMenuItemUI.doClick(BasicMenuItemUI.java:1109)
at javax.swing.plaf.basic.BasicMenuItemUI$MouseInputHandler.mouseReleased(BasicMenuItemUI.java:943)
at java.awt.Component.processMouseEvent(Component.java:5093)
at java.awt.Component.processEvent(Component.java:4890)
at java.awt.Container.processEvent(Container.java:1566)
at java.awt.Component.dispatchEventImpl(Component.java:3598)
at java.awt.Container.dispatchEventImpl(Container.java:1623)
at java.awt.Component.dispatchEvent(Component.java:3439)
at java.awt.LightweightDispatcher.retargetMouseEvent(Container.java:3450)
at java.awt.LightweightDispatcher.processMouseEvent(Container.java:3165)
at java.awt.LightweightDispatcher.dispatchEvent(Container.java:3095)
at java.awt.Container.dispatchEventImpl(Container.java:1609)
at java.awt.Window.dispatchEventImpl(Window.java:1585)
at java.awt.Component.dispatchEvent(Component.java:3439)
at java.awt.EventQueue.dispatchEvent(EventQueue.java:450)
at java.awt.EventDispatchThread.pumpOneEventForHierarchy(EventDispatchThread.java:230)
at java.awt.EventDispatchThread.pumpEventsForHierarchy(EventDispatchThread.java:183)
at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:177)
at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:169)
at java.awt.EventDispatchThread.run(EventDispatchThread.java:99)

Posted: Thu Jan 22, 2004 9:52 am
by johnsfine
bsoplinger wrote: Here's a snippet of the file,
...
bsoplinger wrote: Imported protocol id is 01 45
java.lang.NullPointerException
at com.hifiremote.jp1.ProtocolManager.findNearestProtocol(ProtocolManager.java:238)
at com.hifiremote.jp1.DeviceUpgrade.importFile(DeviceUpgrade.java:849)
For future reference, or for other RM users, the immediate vacinity of the actual error is almost always enough. Which is the actual error line probably won't be obvious to someone other than one of the RM programmers. But you can usually find it easily anyway, if you just know that NullPointerException is an actual error and is more common than all other actual errors combined.

Greg, this particular example of NullPointerException is common enough that it ought to be caught in the code and display some sort of error message, rather than make the user dig through the .err file.

Posted: Thu Jan 22, 2004 10:01 am
by gfb107
That Onkyo upgrade uses the Device Combiner protocol, which is not supported by RM. It should handle this situation more gracefully, but unfortunately you won't be able to use that upgrade. It will be some time before RM supports Device Combiner.

The Replay upgrade use the "Replay TV (Advanced)" protocol, which
is not YET supported by RM. This one might be added soon, though.

Posted: Thu Jan 22, 2004 10:46 am
by gfb107
I've got a fix that will at least tell the user that the protocol isn't found.
That will be in the next release. I can't make a release today because SourceForge's CVS services are down for a scheduled upgrade.

In the meantime, here's the section to put in your protocols.ini that will enable support for the ReplayTV (Advanced). Just replace the section that is currently commented out with this:

Code: Select all

[ReplayTV (Advanced)]
OldNames=ReplayTV Hacked,ReplayTV 1994
PID=01 45
CmdTranslator=Translator()
CmdParms=OBC=0
Notes=hacked version
DevParms=Device Code=1,Unit Code=0
DeviceTranslator=Translator(0,1,12,7) Translator(0,1,13,7,comp) \
                 Translator(0,1,14,6) Translator(0,1,15,6,comp) \
                 Translator(0,1,16,5) Translator(0,1,17,5,comp) \
                 Translator(0,1,18,4) Translator(0,1,19,4,comp) \
                 Translator(0,1,20,3) Translator(0,1,21,3,comp) \
                 Translator(0,1,22,2) Translator(0,1,23,2,comp) \
                 Translator(0,1,24,1) Translator(0,1,25,1,comp) \
                 Translator(0,1,26,0) Translator(0,1,27,0,comp) \
                 Translator(1,1,28,7) Translator(1,1,29,7,comp) \
                 Translator(1,1,30,6) Translator(1,1,31,6,comp) \
                 Translator(1,1,32,5) Translator(1,1,33,5,comp) \
                 Translator(1,1,34,4) Translator(1,1,35,4,comp) \
                 Translator(1,1,36,3) Translator(1,1,37,3,comp) \
                 Translator(1,1,38,2) Translator(1,1,39,2,comp) \
                 Translator(1,1,40,1) Translator(1,1,41,1,comp) \
                 Translator(1,1,42,0) Translator(1,1,43,0,comp)
FixedData=E0 01 00
FixedData.S3C80=a9 35 55 65 55 55 00
Code.S3C80=47 93 71 8B 12 87 04 08 04 00 DE 00 00 00 00 00 \
           CA D4 44 05 35 01 A8 58 0A 6C 26 37 5F 0F 37 5C \
           11 68 C5 5C 9A 37 66 0A E6 0D 04 5C A1 37 5C 02 \
           6C 27 0C 0A 04 0A 0A 10 09 10 C5 10 0A 20 0A 10 \
           09 0A F1 37 52 07 F6 01 46 58 C6 8B E5 20 29 8D \
           01 46
Code.740=0c 1c 31 a9 60 20 db 00 a2 16 a0 02 22 44 a5 5d \
         85 56 20 6c 01 a2 1b a0 02 22 44 a9 20 20 db 00 \
         a5 5e 20 71 01 a5 5f 20 71 01 a5 60 20 71 01 a2 \
         2a a0 a1 22 44 22 06 90 ca 60 3c 04 57 80 05 85 \
         56 3c 08 57 26 56 b0 0d a2 86 a0 01 22 44 a9 10 \
         20 db 00 80 0b a9 10 20 db 00 a2 86 a0 01 22 44 \
         c6 57 d0 e0 60

Posted: Thu Jan 22, 2004 12:25 pm
by bsoplinger
Assuming I did the right thing and deleted all the trailing blanks in the snippet you've provided, I now get this error when I try to import the replay KM file:

Detected 1 cmdParms
Protocol.Protocol(ReplayTV (Advanced)) got DeviceTranslator property.
TranslatorFactory couldn't create an instance of com.hifiremote.jp1. 
java.lang.ClassNotFoundException: com/hifiremote/jp1/ 
at java.lang.Class.forName0(Native Method)
at java.lang.Class.forName(Class.java:140)

Posted: Thu Jan 22, 2004 1:53 pm
by gfb107
Just download this version of protocols.ini

Posted: Thu Jan 22, 2004 8:18 pm
by bsoplinger
Did that, now I get this error:
Parsing line "Phantom1=$3D, Phantom2=$3E, Phantom3=$3F, Phantom4=$40"
Parsing button "Phantom1=$3D"
Parsing button "Phantom2=$3E"
Parsing button "Phantom3=$3F"
Parsing button "Phantom4=$40"
Parsing line ""
java.lang.NullPointerException
at com.hifiremote.jp1.ProtocolManager.findNearestProtocol(ProtocolManager.java:238)
at com.hifiremote.jp1.DeviceUpgrade.importFile(DeviceUpgrade.java:849)
at com.hifiremote.jp1.KeyMapMaster.importFile(KeyMapMaster.java:858)

So I looked at the .txt file and deleted the trailing return, since I saw the 'parsing line ""' right before the error.

Doing that generated this error instead:
Got a multi-model remote to import: URC-881x / 801x / 601x
Added subName URC-881x
Added subName 801x
Added subName 601x
Imported protocol id is 01 45
java.lang.NullPointerException
at com.hifiremote.jp1.ProtocolManager.findNearestProtocol(ProtocolManager.java:238)
at com.hifiremote.jp1.DeviceUpgrade.importFile(DeviceUpgrade.java:849)
at com.hifiremote.jp1.KeyMapMaster.importFile(KeyMapMaster.java:858)

But I think this means I'm making progress ;)

Posted: Fri Jan 23, 2004 10:54 am
by gfb107
I've zipped my version of protocols.ini into protocols.zip to make sure we don't have any problems with spaces and returns getting inserted.

I hope that takes care of it.

Posted: Fri Jan 23, 2004 12:34 pm
by bsoplinger
Yup, that did the trick, now I can load the replay protocol, life is getting better, thanks!
All times are UTC-06:00
Page 1 of 1

Powered by phpBB® Forum Software © phpBB Limited