JP1 Remotes

1. Device: Philips DSR3421/85
2. Type of device: Satellite receiver (Sky Mexico)
3. Year: I don't know
4. JP1/UEI Remote model:OFA 9960 R0
5. Do you have a JP1 cable?No, but I already uploaded 2 codes with IR2WAV
6. Still have original remote?yes
7. Checked the file section? yes
8. Checked Pronto file section (at R/C)? yes
9. Partially working setup code? no
10. Learning remote question? I have tried to lear the remote codes with no succes, even the 9960 blinks twice saying that accepts the code, it does not work. I don't have a JP1 cable to see if there is any code.

I think in using https://www.hifi-remote.com/forums/dload ... le_id=2200 but I'm not sure.

clon74 wrote:I think in using https://www.hifi-remote.com/forums/dload ... le_id=2200 but I'm not sure.

That file contains an RMDU file, so why don't you try it and see if it works your unit.

According to the original thread describing that file, it does work:
https://www.hifi-remote.com/forums/viewt ... 4621#p34621

If it works, let us know so we can store the file in the proper place with a better description.

I tried it following instructions, including the "upgrade protocol ** Required ** " modifications and it didn't work. I had to set default to remote and download the codes for my olevia and insignia audio receiver.

Then it sounds like you have a different device than the one in that file.

I think so but I was unable to find anything about my device on the net.

This is my remote:


and the receiver:
.

I hope you can help me.

I don't see how I can help you without having a way to see what the remote signals look like. I'll ask the folks at UEI if they have this code.

clon74 wrote:1. Device: Philips DSR3421/85
2. Type of device: Satellite receiver (Sky Mexico)
4. JP1/UEI Remote model:OFA 9960 R0

Found a match and recorded the IR signals with the JP1 tools to create the respective files.

• ICT file: https://www.hifi-remote.com/forums/dload ... e_id=10481
• RMDU file: https://www.hifi-remote.com/forums/dload ... e_id=10482