Page 1 of 1
Technika LCD26-M3 TV
Posted: Wed Nov 06, 2019 3:06 am
by actu_8
I have just bought a URC-7525 with a view to using it with a Technika LCD26-M3 TV. The One4all code that works gives just standby toggle and volume. Is this a quick and easy fix or am I face with a good few weeks of work? Although a newbie, I've hacked devices before etc
Posted: Wed Nov 06, 2019 7:44 am
by The Robman
What is the code that partially works?
Posted: Wed Nov 06, 2019 8:48 am
by actu_8
The Robman wrote:What is the code that partially works?
Hi - 10178 operates standby and volume buttons only.
Posted: Wed Nov 06, 2019 9:40 am
by MaskedMan
See if it takes code 11758?
Posted: Wed Nov 06, 2019 11:22 am
by actu_8
MaskedMan wrote:See if it takes code 11758?
Thanks for the reply. Yes, it did but still only volume and standby.
Posted: Wed Nov 06, 2019 11:48 am
by MaskedMan
To make sure there isn't efc in the way try following to clear out advanced codes in the tv device:
1. tv
2. press and hold MAGIC for two blinks release
3. 9 9 4
4. press tv device
5. press tv device again
Posted: Wed Nov 06, 2019 12:20 pm
by actu_8
MaskedMan wrote:To make sure there isn't efc in the way try following to clear out advanced codes in the tv device:
1. tv
2. press and hold MAGIC for two blinks release
3. 9 9 4
4. press tv device
5. press tv device again
Much appreciated. There is no device key but the procedure for 9 9 1 in the manual says press Standby after entering 9 9 1, so I tried that with 9 9 4. No effect I'm sorry to report.
Posted: Wed Nov 06, 2019 6:36 pm
by The Robman
Do you have a JP1 cable to program this remote?
I can help you find the codes to make a complete upgrade for this TV, if you have a cable. If you don't, I can help you find the advanced codes to do it the hard way.
Just FYI, TV/0178 uses NEC1 with device code 4
Posted: Thu Nov 07, 2019 2:05 am
by actu_8
The Robman wrote:Do you have a JP1 cable to program this remote?
I can help you find the codes to make a complete upgrade for this TV, if you have a cable. If you don't, I can help you find the advanced codes to do it the hard way.
Just FYI, TV/0178 uses NEC1 with device code 4
Hi Rob - many thanks - I am really new to this. Can I ask what NEC1 with device code 4 means? Doing it the hard way with advanced codes is OK for me (and if you have the time) as I don't have a JP1 and don't know anyone to borrow one.
Posted: Thu Nov 07, 2019 4:08 am
by actu_8
Hi All,
Got this from OFA today and I now have a functioning remote. Thanks everyone for the help.
To program the requested functions on your One For All remote from the code 10178 , please follow the instructions mentioned below:
Hold down the Magic key until the light blinks twice.
Enter the code 994, the light blinks twice.
Press the Magic key once
Enter the code of the required function, (see the table below).
Press the One For All key you wish to assign the function to.
The light blinks twice and that key should now function.
Your function codes are :
00629 0
00377 1
00375 2
00635 3
00372 4
00632 5
00630 6
00378 7
00245 8
00505 9
00546 C/S HD1
00364 C/S HD2
00697 Channel Down
00299 Channel List
00437 Channel Up
00473 Display
00692 Display/Info
00491 DTV Escape
00311 DTV Menu
00566 DTV Subtitle
00255 DVI
00491 Exit
00596 Fastext Blue
00599 Fastext Green
00341 Fastext Red
00347 Fastext Yellow
00602 Favorite
00342 Guide
00692 Info
00311 Menu
00425 Menu Down
00698 Menu Left
00438 Menu Right
00677 Menu Up
00313 Mute
00440 Nicam/I/II
00420 OK
00296 Picture Mode
00565 Power
00432 Power Off
00684 Power On
00503 Recall
00624 RGB
00601 Scan
00369 Side
00566 Sleep
00615 Sound Mode
00683 Source
00344 Subtitle
00726 Text
00728 Text Cancel
00725 Text Expand
00474 Text Hold
00246 Text Index
00471 Text Mix
00468 Text Reveal
00731 Text Subtitle
00248 Timer
00622 TV
00683 TV Menu
00231 Video 1
00443 Volume Down
00695 Volume Up
00571 Zoom
Posted: Thu Nov 07, 2019 7:03 am
by The Robman
Thanks for those codes. I have created an upgrade for JP1 users:
https://www.hifi-remote.com/forums/dload ... e_id=25706